October 1995
DE-220 Family Ethernet Card
Packet Driver for PC-NFS Installation
=====================================
Copyright (c) 1995 by D-Link Corporation. All rights reserved.
*****************************************************
* Packet Driver Program for Sun MicroSystems PC-NFS *
*****************************************************
The PC-NFS Driver Program lets you run Sun MicroSystems PC-NFS on your PC with
the DE-220 Family Ethernet Card.
The following files will be used in this installation:
Files Contents
----------- ----------------------------------------------------------
PDNFS.SYS PC-NFS Driver Program
DE22X.SYS Packet driver program for DE-220 Family Ethernet card
DE22X.COM Packet driver program for DE-220 Family Ethernet card
Two installation methods are detailed below:
METHOD 1:
1. Install the PC-NFS program according to the procedure described in the
PC-NFS manual. On the screen of the PC-NFS install program, select 3C501
(the 3Com EtherLink card) as your network interface card. When the screens
prompt you, select 3 for the interrupt level (IRQ), and select 300h for
the base I/O address.
2. Copy the following files to the \NFS directory of your hard disk:
PDNFS.SYS
DE22X.SYS
DE22X.COM
3. Modify the CONFIG.SYS file as follows:
DEVICE=C:\ANSI.SYS
DEVICE=C:\NFS\PCNFS.SYS /m
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\VECIE6.SYS
DEVICE=C:\NFS\DE22X.SYS <-d> <packet_int_no> <-w>
DEVICE=C:\NFS\NFSVEC.SYS
DEVICE=C:\NFS\PDNFS.SYS
LASTDRIVE=V
AUTOEXEC.BAT file:
SET PATH = C:\;C:\NFS
SET TZ=EST5EDT
SET NFSDRIVE=C
NET YPDOMAIN ypserver
NET START RDR
NET YPSET homer
NET NAME john
NET USER F: \\user\john
We use the name "john" here as an example.
4. Reboot the PC to start PC-NFS.
You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.
METHOD 2:
1. Install the PC-NFS program according to the procedure described in the
PC-NFS manual. On the screen of the PC-NFS install program, select 3C501
(the 3Com EtherLink card) as your network interface card. When the screens
prompt you, select 3 for the interrupt level (IRQ), and select 300h for
the base I/O address.
2. Copy the following files to the \NFS directory of your hard
disk:
PDNFS.SYS
DE22X.SYS
DE22X.COM
3. Modify the CONFIG.SYS file as follows:
DEVICE=C:\ANSI.SYS
DEVICE=C:\NFS\PCNFS.SYS /m
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\VECIE6.SYS
DEVICE=C:\NFS\NFSVEC.SYS
DEVICE=C:\NFS\PDNFS.SYS
LASTDRIVE=V
AUTOEXEC.BAT file:
SET PATH = C:\; C:\NFS
SET TZ=EST5EDT
SET NFSDRIVE=C
DE22X <-d> <packet_int_no> <-w>
NET YPDOMAIN ypserver
NET START RDR
NET YPSET homer
NET NAME john
NET USER F: \\user\john
We use the name "john" here as an example.
4. Reboot the PC to start PC-NFS.
You may now execute the PC-NFS commands to communicate
other computers through the TCP/IP protocol.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.