October 1995
DE-220 Family Ethernet Card
Netware Server 4.x Driver Installation
=======================================
Copyright (c) 1995 by D-Link Corporation. All rights reserved.
******************
* SERVER SETUP *
******************
Method 1 using install menu (for NetWare 4.1 only)
==================================================
1) Copy the appropriate NetWare driver files (from this diskette) to the
DOS partition of your hard disk.
>md DE22X
>copy A:\NETWARE\SERVER\*.* C:\DE22X --Insert D-Link Driver disk in 'A'
>copy A:\NETWARE\SERVER\NW4X\*.* C:\DE22X
2) Boot the Novell Server, after the server is started
execute "LOAD INSTALL" instruction.
: load install
3) Select "Driver Option" and press <Enter>.
4) Select "Configure network drivers" and press <Enter>.
5) Select "Select a driver" and press <Enter>.
6) Press the <Ins> key to install an unlisted driver.
7) Press <F3> to specify a diffrent path (C:\DE22X) and press <Enter>.
8) Select "DE22X.LAN" and copy DE22X.lan.
9) Config adapter parameter, then Select "Save parameters and load driver".
10) Next time you start up your system, only follow steps 2 to 5 to complete
the installation.
Method 2 modifying an Existing NetWare 4.x Server
=================================================
1) At any workstation, Login to the Novell server as a SUPERVISOR.
2) Copy all supplied NLM and LAN files to your server's SYSTEM directory:
>Copy A:\NETWARE\SERVER\NW4XX\*.* F:\SYSTEM
3) At the Novell Server side, execute load install
:load install
Select <System Option>
Select <Edit AUTOEXEC.NCF>
Modify the server's AUTOEXEC.NCF as following.
load DE22X.LAN
(msm.nlm and ethertsm.nlm will be automatically loaded
while loading de22x.lan)
bind ipx to DE22X NET=xxxx
4) Shutdown the Server and then turn it ON again. This time, the DE-220
family ethernet card will be installed as your network card.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.