100BLAN.TXT Driver File Contents (es322.exe)

Notes for Using the Archive 100BLAN.EXE Contained on the
Intel EtherExpress (TM) PRO/100+ PCI Adapter Configuration
and Drivers Disk
   Location of Archive:  \NWSERVER\311LAN\100BLAN.EXE

   Contents of Archive:  E100B.LAN (ODI 3.2 spec driver)
                         E100B.LDI (Install file)
                         NW311.TXT (Install instructions)


100BLAN.EXE is a self-extracting archive that contains the
NetWare Server ODI 3.2 spec driver used for NetWare 3.11.
The NetWare server driver contained on the directory
\NWSERVER on the Configuration and Drivers disk
follows the NetWare ODI 3.3 spec and should be used for
NetWare 3.12, 4.1x and greater.


Copy the file 100BLAN.EXE to your local hard disk. Change
directories to the same location where you copied 
100BLAN.EXE.  At the DOS prompt type:

100blan <return>

Refer to the readme file contained in the archive to install
the driver.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.25