This file illustrates the usage of the SETUP program.
(A) There are five items in the main menu.
(1). Show Configuration
(2). Diagnose
(3). Change Current Setting
(4). Utility
(5). On-line Help
Press 'ENTER' to choose the item, 'ESC' to exit the
program and use 'UP/DOWN ARROW' to scroll the items.
(B) The usage of each item
(1) Show Configuration
Choose "Show Configuration" to look at the current
PCI Lan Card Configuration.
(2) Diagnose
Choose "Diagnose" if you want to verify that your
PCI Lan Card is working correctly.
After entering "Diagnose", there is a sub-menu with
two items.
1. Basic Diagnosis
2. Network Test (Tx/Rx)
Choosing "Basic Diagnosis" will test NIC registers
read/write, cable link status and MII loopback.
Choosing "Nework Test (Tx/Rx)" will test the normal
transmission and reception of this Lan Card. In
this test, the card need to be attached on the
Network.
(3) Change Current Setting
Choose "Change Current Setting" to setup new
configuration of your PCI Lan Card.
After entering "Change Current Setting", there is a
sub-menu with two items.
1. BootROM Set
2. Power Management Function Set
After choosing "BootROM Set", you can change the
size and speed of the BootROM on this Land Card.
After choosing "Power Management Function Set",
you can change the power management capabilities
of this Lan card , such as enable/disable the
capability to receive magic packet. And you can
set new power state of this Lan Card.
Note: If you enable the capablity of receiving
Wake-Up frame , you should input a file
contain wake-up frame pattern to program
the related wake-up registers on this Lan
Card. (To reference wake-up frame pattern
, see the sample file 'wakeup.dat'.)
(4) Utility
After entering "Utility", there is a sub-menu with
three items.
1. Transmit Magic Pkts
Use this item to send magic packets to wake up
another sleeping machine.
2. Transmit Wake-up Frames
Use this item to send wake up frame to wake up
another sleeping machine. Because the pattern
of wake-up frame is user-defined, you need to
input a file name which contains the packet.
3. Transmit Flow Control Pkts
Use this item to send flow control packets to
another machine.
(5) On-line Help
Choose "On-line Help" to see this file.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.