Files needed in updating BIOS: 1. Phlash.exe -- utility used to update BIOS. 2. Platform.bin -- reference file needed by Phlash utility. 3. Tp2_10h.rom -- BIOS version 10H II. How to update the BIOS: --------------------------- 1. Copy the files into a clean bootable diskette. 2. Boot from the diskette and enter the command "PHLASH Tp2_10h.rom". 3. After the BIOS is completely updated, you will be prompted to press any key to continue and the system will shut off. 4. Press Power Switch again and check the BIOS version. ------------------------end------------------------- IMPORTANT NOTE: The platform.bin included with this BIOS is different from previous platform.bin You can only use the platform.bin file included with this BIOS. REMINDER: To prevent accidental power failure which may cause failure in flashing BIOS, please connect both AC and DC power source.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.