1. A9_v19slc.ZIP Driver
2. README.TXT File Contents

README.TXT Driver File Contents (A9_v19slc.ZIP)

                Advance 9 BIOS V1.9SLC release note.
 
This disk contains three files:A9_V19.bin,README.TXT,AWDFLASH.EXE
 
1.The checksum of BIOS File: A9_V19.bin is 9F13(Hex) ;

2. How to use AWDFLASH.EXE utility:
   This is a flash memory write/read utility.
IMPORTANT NOTE:
   The AWDFLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the AWDFLASH utility.

 Usage:  AWDFLASH [FileName1] [FileName2] [/<sw>[/<sw>...]]
      FileName1 : New BIOS Name For Flash Programming
      FileName2 : BIOS File For Backing-up the Original BIOS
  <Swtches>
    ?: Show Help Messages
   py: Program Flash Memory               pn: No Flash Programming
   sy: Backup Original BIOS To Disk File  sn: No Original BIOS Backup
   Sb: Skip BootBlock programming         sd: Save DMI data to file
   cp: Clear PnP(ESCD) Data After Programming
   cd: Clear DMI Data After Programming
   cc: Clear CMOS Data After Programming
    R: RESET System After Programming
 Tiny: Occupy lesser memory
    E: Return to DOS When Programming is done
    F: Use Flash Routines in Original BIOS For Flash Programming
   LD: Destroy CMOS Checksum And No System Halt For First Reboot
       After Programming

 Example: AWDFLASH 2a59i000.bin /py/sn/cd/cp


Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!



UPDATE DATE:09/30/2000

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.