1. nsgfc2206.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (nsgfc2206.zip)

 NDIS 2/3 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
 ============================================================

  Content:
  --------
          A) Install NDIS 2/3 driver to the WFW 3.11
          B) Set Up Driver Parameters on WFW311

A) Install NDIS 2/3 driver to the WFW 3.11

    The drivers named GFCPCI.DOS (NDIS 2), GFCPCI.386 (NDIS 3)
    contained in the directory NDIS\DOS,WFW311.

    NDIS Driver Installation on Windows for Workgroups 3.11
    -------------------------------------------------------

    1. Run Windows by typing WIN from the DOS prompt.
    2. Click the "Network" icon in the Main Program Group.
    3. Click the "Network Setup" icon in the Network window.
    4. Select "Drivers" item from the Network Setup dialog box.
    5. Select "Add Adapters" item from the Option dialog box.
    6. Select "Unlisted or Updated Network Adapter" when the
       Install driver field appears.
    7. Type destination path (A:\WFW311 or B:\WFW311) in your PC
    8. Insert the GFC2206 Driver Diskette in your floppy drive
       and press <Enter> to start the installation process.

    9. When the "GFC2206 PCI Ethernet Adapter Driver" dialog box appear.  
       Select the installed adapter & driver from the following options:

                GFC2206 PCI LAN Adapter driver,

    10.Follow screen instructions to complete the process.

    11.Restart your computer.


B) Set Up Driver Parameters on WFW311

    There are 4 parameters that can be set in driver installation & reconfiguration

    1. Bus number:  the PCI board index, range is 1..16,
                    This parameter is used to distinguish the activated board
                    when multiple PCI LAN boards are enabled by the
                    driver.

    2. Medium type: the connection type of the LAN board,
                    can be selected from 10HALF, 10FULL, 100FULL
                    and 100HALF, default is AUTO.

    3. Dev number:  the PCI DEVICE index, range is 0..255,
                    This parameter is used to distinguish the activated board
                    when multiple PCI LAN boards are enabled by the
                    driver.


    Sample Configuration Files
    --------------------------

    1. CONFIG.SYS File

       FILES=30
       buffers=30
       STACKS=9,256
       DEVICE=c:\windows\HIMEM.sys
       DEVICE=C:\WINDOWS\IFSHLP.SYS
       rem device=C:\WINDOWS\protman.dos /i:C:\WINDOWS
       rem device=C:\WINDOWS\GFCPCI.dos
       rem device=C:\WINDOWS\workgrp.sys
       LASTDRIVE=z

    2. PROTOCOL.INI File on Windows for Workgroups

       [network.setup]
          version=0x3100
          netcard=GFCPCI,1,GFCPCI
          transport=ms$netbeui,MS$NETBEUI
          lana0=GFCPCI,1,ms$netbeui

       [protman]
          DriverName=PROTMAN$
          PRIORITY=MS$NETBEUI

       [GFCPCI]
          DriverName=GFCPCI$
          SIA_MODE = AUTODETECT

       [MS$NETBEUI]
          DriverName=netbeui$
          SESSIONS=10
          NCBS=32
          BINDINGS=GFCPCI
          LANABASE=0

    3. AUTOEXEC.BAT File

       C:\WINDOWS\net start
       C:\WINDOWS\SMARTDRV.EXE
       @ECHO OFF
       PROMPT $p$g
       PATH C:\WINDOWS;
       SET TEMP=C:\WINDOWS\TEMP


    1. CONFIG.SYS File
       FILES=30
       BUFFERS=30
       LASTDRIVE=Z
       DEVICE=C:\WFW311\HIMEM.SYS
       DEVICE=C:\WFW311\IFSHLP.SYS
       STACKS=9,256

    2. AUTOEXEC.BAT File

       C:\WFW311\SMARTDRV.EXE
       C:\WFW311\net start
       PATH C:\WFW311;
       SET TEMP=C:\WFW311\TEMP

    3. SYSTEM.INI

       [386Enh]
       netcard=GFCPCI.386


--- End of File ---