Flash update instructions for the AcceleRAID 250 Software Kit v4.04-02 December 20, 2001 The attached flash files are for the Mylex AcceleRAID 250 controller ONLY. Flashing these files to a controller other than the model specified may render the controller inoperable. This release is contained within the Software Kit 4.04 CD. Use EzAssist -> Advanced Options to flash the controller with each of the four update files. (Write down the filenames so they can be entered when prompted by EzAssist.) NOTE: If your controller is currently using the DACCF version of the configuration utility, you must run the DOS based RAID EzAssist utility to update the files. Before upgrading the firmware from a version less than 4.07, make sure that the Background Initialization has completed. Background Initialization occurs immediately after a New Configuration is saved and usually takes a few hours. It is characterized by significant drive activity. Make sure this activity has stopped before upgrading the firmware. BGJ41050.IMG BIOS Version 4.10-50 EZ20320.IMG RAID EzAssist 2.03-20 FGJ40837.000 Firmware 4.08-37 KGJ40613.IMG Bootblock 4.06-13Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.