readme.txt Driver File Contents (kvt48l03.exe)

Please note that the BIOS Update files here are for Mercury Board only. Please don't use in non-Mercury Brand Products.

Before upgrading the BIOS, please Consult the Mainboard User's Manual for necessary Jumper Settings.

--------------------------------------------------

How to install a New BIOS for MERCURY BOARD

Please follow the steps as below:

1. Your computer must be running in a real-mode DOS environment, not the DOS window of Windows NT or Windows 95/98. We recommend that you create a new formatted DOS system floppy diskette for bootup.

2. Download the new BIOS file from our Web site (http://www.kobian.com/), and unzip it. Get the Flash Utility file from the mother board CDROM. Copy these files to the DOS system diskette.

3. Turn off your computer and insert the system diskette in your computer's diskette drive.

4. You might need to run the Setup Utility and change the boot priority items on the Advanced BIOS Features Setup page, to force your computer to boot from the floppy diskette drive first.

5. At the A:\ prompt, after your computer has booted to DOS from the diskette, run the Flash Utility and press <Enter>. Then, follow the Screen instructions to upgrade your BIOS properly.

6. When the installation is complete, remove the floppy diskette from the diskette drive and restart your computer. If your mainboard has a Flash BIOS jumper, reset the jumper to protect the newly installed BIOS from being overwritten.



Note:
i)   If Flash Utility reported unsuccessful upgrade, don't quit the program. Redo program procedure.

ii)  If you're executing the program on floppy diskette, please make sure the diskette is not write protected.

iii) We highly recommend that you should make a backup for old BIOS by using the Flash Utility.  Plesae follow the screen instruction of the Flash Utility.


Warning:
Avoid power-off incidentally in upgrading procedure, or system would fail to reboot!


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.63