************************************************************************ * * * AOpen AOP-320 16-bit PCMCIA 10/100 Ethernet Card * * * ************************************************************************ LAN Manager Workstation/Server ============================== Introduction: ------------- This document describes the procedure to setup LAN Manager 2.x driver for AOpen AOP-320 16-bit PCMCIA 10/100 Ethernet Card. Location of Driver: (DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\AOP320\AOP320.DOS Sample Configuration Files: --------------------------- CONFIG.SYS (for DOS): DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\AOP320\AOP320.DOS PROTOCOL.INI (will contain): [AOP320_NIF] ; PROTOCOL.INI SAMPLE DriverName = AOP320$ Setup Procedures: ----------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure your Microsoft LAN Manager is properly installed. 1. Run the appropriate Microsoft Lan Manager SETUP for computer you are setting up. Select [Configuration] item , ( the AOP-320 driver isn't included on the Lan Manager disk ) and insert the AOP-320 driver disk, select the AOP-320 driver and follow the directions. 2. When completed, reboot your computer . Note After completion of the SETUP , you should modify the PROTOCOL.INI file to specify the INTERRUPT number and the IOBASE number which must be equal to the /irq and /iop parameters specified to the Card Enabler program. ------------------------------ End of File -------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.