InfoList.txt Driver File Contents (pc476-4-U_en.exe)

Copyright © Wacom Company, Limited, 1999
All rights reserved.


THINGS TO KNOW BEFORE INSTALLATION

First install the tablet hardware then install the
software.  USB tablets support hot-plugging and
can be connected while your computer is turned on.
If you have a serial tablet, turn off your computer
before connecting the tablet.

If your computer does not have an available port,
you will need to remove an existing device or add
an additional port before installing the software.

If you are installing a serial tablet, your serial
port must be properly configured.  Some computers
have a built-in modem and the external serial port
may be disabled or configured with the same serial
port address as the modem. If your serial tablet
does not communicate properly after installing the
hardware and software, check your serial port to
verify that it is properly configured.  See the
troubleshooting section in your user's manual for
more information.

Before continuing close all open applications.
  
Click Cancel to exit Setup, Click Next to proceed
with this Setup program.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.47