1. 3com905b.zip Driver
  2. DRMONNT.INF File Contents

DRMONNT.INF Driver File Contents (3com905b.zip)

 DOWNLOAD NOW
DRMONNT.INF Driver Update Utility 
[Identification]
 OptionType = NetTransport
[Options]
 DTA
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "service"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
Manufacturer = "3Com"
DTAMajorVersion = "1"
DTAMinorVersion = "0"
DTAVersion = $(DTAMajorVersion)"."$(DTAMinorVersion)
DTASoftwareName = "DTA"
DTASoftwareImagePath = "%SystemRoot%\System32\drivers\dtadrv.sys"
NetRuleSoftwareType = "DTA lmNetService ndisTransport"
NetRuleSoftwareClass = {"rasCapableTransport netBiosTransport"}

NetRuleSoftwareUse = $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm = """DTA"" yes yes simple"

DTAKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DTASoftwareName)"\CurrentVersion"

AgentMajorVersion = "1"
AgentMinorVersion = "0"
AgentVersion = $(AgentMajorVersion)"."$(AgentMinorVersion)
AgentServiceImagePath = "%SystemRoot%\System32\drmon\smartagt\smartagt.exe"
AgentSoftwareName = "dRMON SmartAgent"
AgentServiceName = $(AgentSoftwareName)
AgentKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(AgentSoftwareName)"\CurrentVersion"

[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyDTA = ""
KeyAgent = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers

[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set CalledFrom = $($6)
Debug-Output "drmon.INF: $($6) is: "$(CalledFrom)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNXPNB.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
Debug-Output "OEMNXPNB.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNXPNB.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = installadapter
endif
set RadioDefault = 2
set RadioIn = {$(RadioDefault)}
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(AgentKeyName) $(MAXIMUM_ALLOWED) KeyAgent
Ifstr $(KeyAgent) != $(KeyNull)
CloseRegKey $(KeyAgent)
ifstr $(Option) == "DTA"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS",+
 "3COM dRMON SmartAgent PC Software v1.0 already installed."
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
endif
CloseRegKey $(KeyAgent)
goto installproduct
installproduct = +
StartWait
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
set OEM_ABANDON_ON = TRUE
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
 $(DTASoftwareName), +
 $(DTASoftwareName), +
 $(DTASoftwareDisplayName), $(STF_CONTEXTINFNAME), +
 $(DTASoftwareImagePath), "kernel", "TDI", {}, "",+
 $(NetEventDLL)
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalRegistry
endif
Set SoftDTAKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
set KeyParameters = $($R4)
Set SoftLinkageKey = $($R5)
 set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
 {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(DTAMajorVersion)},+
 {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(DTAMinorVersion)},+
 {Title,$(NoTitle),$(!REG_VT_SZ),$(AgentSoftwareTitle)},+
 {Description,$(NoTitle),$(!REG_VT_SZ),$(AgentSoftwareDescription)},+
 {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(DTASoftwareName)},+
 {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftDTAKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftDTAKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
set NewValueList = {{type ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
 {use ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
 {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
 {InfOption,$(NoTitle),$(!REG_VT_SZ),"DTA"}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftDTAKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
CloseRegKey $(KeyParameters)
goto fatalRegistry
endif
Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftDTAKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
goto fatalRegistry
endif
CloseRegKey $(SoftDTAKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftLinkageKey)
endif
goto writeparameters
writeparameters = +
CloseRegKey $(KeyParameters)
 
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
 $(AgentSoftwareName), +
 $(AgentSoftwareName), +
 $(AgentServiceDisplayName), $(STF_CONTEXTINFNAME), +
 $(AgentServiceImagePath), "serviceauto", "", {"DTA"}, "",
 
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalRegistry
endif
 
set SoftAgentKey = $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
 
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
 {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(AgentMajorVersion)},+
 {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(AgentMinorVersion)},+
 {"Locked",$(NoTitle),$(!REG_VT_SZ),"ON"},+
 {Pathname,$(NoTitle),$(!REG_VT_SZ),$(AgentServiceImagePath)},+
 {Description,$(NoTitle),$(!REG_VT_SZ),$(AgentSoftwareDescription)},+
 {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(AgentSoftwareDisplayName)},+
 {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

Shell $(UtilityInf), AddValueList, $(SoftAgentKey), $(NewValueList)
set RegistryErrorIndex = $($R0)
Ifstr $(RegistryErrorIndex) != NO_ERROR
CloseRegKey $(SoftAgentKey)
 
goto fatalRegistry
endif
 
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Control\ProductOptions" +
 $(MAXIMUM_ALLOWED) ProductType
GetRegValue $(ProductType) "ProductType" ProductTypeList
set Type = *($(ProductTypeList),4)
Ifstr(i) $(Type) != "WinNT"
Shell $(UtilityInf), AddValueList, $(SoftAgentKey) +
 {{dRMON,$(NoTitle),$(!REG_VT_SZ),off}}
 
endif
CloseRegKey $(SoftAgentKey)

OpenRegKey $(!REG_H_LOCAL) "" $(AgentKeyName) $(MAXIMUM_ALLOWED) AgentBaseKey
Ifstr $(AgentBaseKey) != $(KeyNull)
DeleteRegTree $(AgentBaseKey) "NetRules"
endif

EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
ifstr(i) $(CalledFrom) == "-inf"
RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\undrmon.exe -test
OpenRegKey $(!REG_H_LOCAL) "" $(AgentKeyName) +
 $(MAXIMUM_ALLOWED) AgentKey
GetRegValue $(AgentKey) "UnInstall" AgentList
set result = *($(AgentList),4)
Ifstr(i) $(result) == "No"
CloseRegKey $(AgentKey)
goto end
endif
CloseRegKey $(AgentKey)
else
OpenRegKey $(!REG_H_LOCAL) "" $(AgentKeyName) +
 $(MAXIMUM_ALLOWED) AgentKey
GetRegValue $(AgentKey) "Locked" AgentList
set Type = *($(AgentList),4)
Ifstr(i) $(Type) == "ON"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS",+
 "3COM dRMON SmartAgent PC Software can't be removed. Please contact your system administrator for further intructions."

 CloseRegKey $(AgentKey)
 goto end
 endif
 CloseRegKey $(AgentKey)
 endif
 
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
 $(DTASoftwareName)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Debug-Output "ShellCode error"
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
 $(AgentSoftwareName)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 Debug-Output "ShellCode error"
 goto ShellCodeError
 endif
 set RegistryErrorIndex = $($R0)
 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
 goto fatalregistry
 endif
 RunProgram status "x" "" $(!STF_WINDOWSSYSPATH)\undrmon.exe -inf

 
goto end
UpgradeSoftware = +
 
goto end
successful = +
ifstr(i) $(!STF_GUI_UNATTENDED) != "YES"                                                	 
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS",+
 "3Com dRMON SmartAgent PC Software is successfully installed."
endif
 goto end
warning = +
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(to)
 else-ifstr(i) $($R1) == "CANCEL"
 goto $(from)
 else
 goto "end"
 endif
nonfatalinfo = +
 Set CommonStatus = STATUS_USERCANCEL
 Set Severity = STATUS
 goto nonfatalmsg
nonfatal = +
 Set Severity = NONFATAL
 goto nonfatalmsg
nonfatalmsg = +
 ifstr(i) $(Error) == ""
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 ifstr(i) $($R1) == "OK"
 goto $(from)
 else
 goto "end"
 endif
fatalregistry = +
 Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal
fatal = +
 ifstr(i) $(Error) == ""
 Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 set Error = $($R0)
 endif
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
 goto ShellCodeError
 endif
 goto setfailed
ShellCodeError = +
 set DlgType = "MessageBox"
 set STF_MB_TITLE = $(ShellCodeErrorTitle)
 set STF_MB_TEXT = $(ShellCodeErrorText) 
set STF_MB_TYPE = 1
 set STF_MB_ICON = 3
 set STF_MB_DEF = 1
 ui start "Error Message"
 goto setfailed
setfailed = +
 set CommonStatus = STATUS_FAILED
 ifstr(i) $(OEM_ABANDON_ON) == TRUE
 set OEM_ABANDON_ON = FALSE
 goto removeadapter
 endif
 goto end
end = +
 goto term
term = +
 Return $(CommonStatus)
[RemoveDirAll]
 RemoveDir $(!STF_WINDOWSSYSPATH)"\dRMON\SmartAgt\"
[Install-Option]
 set STF_VITAL = ""
 ifstr(i) $(AddCopy) == "YES"
 AddSectionFilesToCopyList Files-Agent $(SrcDir)drmon\update\SmartAgt $(!STF_WINDOWSSYSPATH)\drmon\SmartAgt
 AddSectionFilesToCopyList Files-DTAApps $(SrcDir)drmon\update\dta $(!STF_WINDOWSSYSPATH)
 AddSectionFilesToCopyList Files-DTADrv $(SrcDir)drmon\update\dta $(!STF_WINDOWSSYSPATH)\drivers 

AddSectionFilesToCopyList Files-Agent $(SrcDir)drmon\update\SmartAgt $(!STF_WINDOWSSYSPATH)\drmon\update\smartagt 
AddSectionFilesToCopyList Files-DTA $(SrcDir)drmon\update\DTA $(!STF_WINDOWSSYSPATH)\drmon\update\DTA
 AddSectionFilesToCopyList Files-NIC $(SrcDir)drmon\update\nic $(!STF_WINDOWSSYSPATH)\drmon\update\nic
 AddSectionFilesToCopyList Files-SetUp $(SrcDir)drmon $(!STF_WINDOWSSYSPATH)
 

endif
 ifstr(i) $(DoCopy) == "YES"
 CreateDir $(!STF_WINDOWSSYSPATH)\drmon
 CreateDir $(!STF_WINDOWSSYSPATH)\drmon\update
 CreateDir $(!STF_WINDOWSSYSPATH)\drmon\update\dta
 CreateDir $(!STF_WINDOWSSYSPATH)\drmon\update\nic
 CreateDir $(!STF_WINDOWSSYSPATH)\drmon\update\smartagt
 
CreateDir $(!STF_WINDOWSSYSPATH)\drmon\smartagt
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 endif
 ifstr(i) $(DoConfig) == "YES"
 endif
 Exit



 
[Install-Update]
 

exit
[Source Media Descriptions]
 1 = "3Com EtherDisk for Fast EtherLink XL and EtherLink XL Adapters (DISK 2)" , TAGFILE = DISK2
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME="drmonsgt.inf"


[Files-DTAApps]
1,dtaapi.nt , SIZE=999, RENAME=dtaapi.dll

[Files-DTADrv]
1,dtadrv.sys , SIZE=999
[Files-Agent]
1,smartagt.ini 
1,smartagt.nt, RENAME=smartagt.exe 

[Files-DTA]
1,dtaapi.nt,RENAME=dtaapi.dll 
1,dtadrv.sys 

[Files-NIC] 

[Files-SetUp] 
1, undrmon.exe
[LanguagesSupported]
 ENG
[OptionsTextENG]
 NDISPERF = "3Com dRMON SmartAgent PC Software"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "DTA Driver"
DTASoftwareDescription = "3Com NDIS 3.0 DTA Driver"
AgentSoftwareDescription = "3Com Distributed Remote Monitoring Smart Agent"
AgentSoftwareDisplayName = "3Com dRMON SmartAgent PC Software" 
AgentSoftwareTitle = $(AgentSoftwareDisplayName)
AgentServiceDisplayName = $(AgentSoftwareDisplayName)
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
GroupLabel = "Optimization:"
Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"
DlgType = "Radio" 
DlgTemplate = "NBF" 
Caption = $(FunctionTitle)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNXPNB_INS)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 1.43