3Com (R) Corporation
EtherDisk (R) Diskette for
The 3C90X Fast EtherLink XL/EtherLink XL Bus Master Adapter Family
IBM LAN Server DOS Client
IBM LAN Server v4.0 for DOS
---------------------------
IBM DOS Lan Services Install v4.0
1. Insert the disk labeled DOS LAN Services Disk 1 into your disk drive.
2. Change to that drive and type:
INSTALL
3. Choose the directory where you want the software installed.
The default is C:\NET.
4. A menu appears that provides a list of network cards.
Choose "Network card not shown in the list below..."
5. Type:
A:\NDIS2\DOS
Remove the DOS LAN Services Disk 1 diskette and insert the EtherDisk
diskette.
6. The next menu should display 3Com Fast EtherLink XL/EtherLink XL Bus
Master Family.
7. Additional menus will appear.
Choose the appropriate options for your network environment. Refer
to the IBM manual if there are questions regarding these menus.
8. After completing the installation, you must copy EL90X.DOS to C:\NET
before rebooting.
(%VER LANSRV.TXT - IBM LAN Server DOS Client v1.0b)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.