LINUX.TXT Driver File Contents (

The procedure to activate rtl8019 on linux :
Hint:RTL8019 is ne2000 compatable.

  step 1: make sure that kernel source code is included
  		(check /usr/src/linux)

  step 2: recompile kernel:
                cd to /usr/src/linux, them type 'make menuconfig'

                select the following options(mark them as '*')
                 .enable module support
                 .networking support
                 .TCP/IP networking
                 .network device support
                 .ne2000/ne1000 support
  step 3: after options are selected, exit and run
                make dep;make clean;make zImage;
          if no serious error happens, the new kernel 'zImage' will be in
          copy this file to root.
          modify '/etc/lilo.conf' file to point to this new file.
          run 'lilo'

  step 4: when system boots, the driver will be load. then the driver will
          scan {0x300,0x280,0x320,0x340,0x360} port to see if a card is 
            (you can run 'dmesg' to see the boot message)
          ps: in some case, PNPISA may assign ioports not in the range. you
              can use 'rset8019' (in DOS) to set the card in jumpless mode
              and set ioaddr to one of these ioport.

  step 5: run netconfig to setup TCP/IP
        (run 'ifconfig' or 'netstat -i' to see if there is a interface 

                                		By Kinston Huang
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.95