1. kds-av5t.exe Driver
2. KDSInstall.txt File Contents

KDSInstall.txt Driver File Contents (kds-av5t.exe)

+ Avitron Monitors                  +
+ Copyright 1999 KDS USA / Canada   +
+ Windows 95/98 Driver Installation +
+++++++++++++++++++++++++++++++++++++
==================================================================
i.   Windows 95 Installation
ii.  Windows 98 Installation
iii. Support Information
==================================================================

i. Windows 95

Installation process for Windows 95.

***(Make a directory and unzip the files in this directory.)***

1.   Close all open applications.
2.   From Windows the Windows desktop, click;
	START
	Settings
	Control Panel
3.   Click Display Properties
4.   Click the Settings tab
5.   Click Change Display Type or Advanced Properties
At this point you will need to know if you have Windows 95 REV A 
or REV B. If you Revision A you will have a Tab called Change 
Display Type if you have Revision B you will have Advanced 
Properties.

For Revision A
**********************************
Click Change Display Type 
Click Change on the MONITOR PART OF THE SCREEN (The lower Section)
Click on the Show all Devices button 
Click Have Disk
Click Browse
Double Click on C:
Click c:\ (Directory you created)
Click OK 
Highlight (Korea Data Systems) under Manufacturer from the List. 
Click on the Monitor that you have.(AV5T)
Click OK 
Click Close to exit display Properties
Click START
Click SHUTDOWN
Click RESTART

For Revision B
**********************************
Click on Advanced Properties
Click on the Monitor Tab
Click on Change 
Click on the Show all Devices button 
Clck Have Disk
Click Browse
Double Click on C:
Click c:\ (Directory you created)
Click OK 
Highlight (Korea Data Systems) under Manufacturer from the List 
Click on the Monitor that you have.  (AV5T)
Click Apply
You will get a message "Windows will now Adjust the Refresh Rate. 
If the screen becomes garbled wait 10 seconds and your original 
setting will return. 
Do You want to Keep these settings  Say "YES"  (If everything looks good)
Click OK 


ii. Windows 98
==================================================================
Installation process for Windows 98.


***(Make a directory and unzip the files in this directory.)***

1.   Close all open applications.
2.   From Windows the Windows desktop, click;
	START
	Settings
	Control Panel
3.   Click Display Properties
4.   Click the Settings tab
5.   Click Advanced Properties
6.   Click on the Monitor Tab
	NOTE:If you don't have a MONITOR tab, refer to ii.a. 
	section below.
7.   Click on Change 
8.   Click on the Show all Hardware button 
9.   Click Have Disk
10.  Click Browse
11.  Double Click on C:
12.  Click c:\ (Directory you created)
13.  Click OK 
14.  Highlight (Korea Data Systems) under Manufacturer from the List 
15.  Click on the Monitor that you have (AV5T)
16.  Click Apply
	You will get a message "Windows will now Adjust the 
	Refresh Rate. If the screen becomes garbled wait 10 
	seconds and your original setting will return. 
17.  Do You want to Keep these settings  Say "YES"  
18.  Click OK 
19.  Close
20.  Done

ii.a NO MONITOR TAB in Display Properties
==================================================
1.  Close all programs
2.  Click START
3.  Click SETTINGS
4.  Click CONTROL PANEL
5.  Click SYSTEM
6.  CLick DEVICE MANAGER
7.  Double click MONITOR.  Current device will be displayed. 
8.  Highlite the device
9.  Double-click device
10. You will get two tabs; GENERAL and DRIVER
11. Click on DRIVER
12. Click UPDATE DRIVER
13. Click NEXT
14. Click DISPLAY LIST OF ALL DRIVERS IN A SPECIFIC LOCATION
    SO YOU CAN SELECT THE DRIVERS YOU WANT.	
15. Click NEXT
16. Click HAVE DISK
17. Type C:\ (Directory you created) over the default A:\
18. Click OK
19. Click OK
20. Click NEXT
21. Click NEXT
22. Click FINISH

iii. SUPPORT INFORMATION

Driver support, call 1-888-537-9001 Canada only