3Com (R) Corporation TokenDisk (R) Diskette for The 3C359/3C359B TokenLink Velocity XL PCI Token Ring Network Interface Card IBM LAN Server Installation Notes IBM LAN Server -------------- This TokenDisk diskette contains Token Ring driver import files for IBM LAN Server and IBM Warp Server. IBM LAN Server 4.0 ------------------ OS/2 LAN Server 4.0 and MPTS (LAPS) Installation 1. Insert the IBM MPTS diskette 1 in the floppy drive. Type : INSTALL 2. Click OK at the first screen. 3. Click the INSTALL button. 4. Enter the target drive, for example C. 5. When prompted, insert the MPTS diskette 2 in the floppy drive. Click OK. 6. Click OK when the copy is done. 7. Click CONFIGURE to configure and install network adapter. 8. Select LAN ADAPTERS AND PROTOCOLS. Click CONFIGURE. 9. At the LAPS Configuration dialog box, click OTHER ADAPTER. 10. Insert the TokenDisk diskette #2 in the floppy drive. 11. Enter the path name for the TokenLink OS/2 NDIS driver : A:\NDIS2\OS2 Click OK. 12. Scroll down the NETWORK ADAPTERS list, select the 3Com TokenLink Velocity PCI XL Adapter For OS2. Click ADD. 13. Scroll down the PROTOCOLS list, select the protocol to use. Click ADD. Repeat for more protocols. 14. Click OK when complete. 15. Continue with installation and configuration as prompted or click CLOSE to exit and follow the prompts. 16. Copy the microcode file TLNKP.MAC from the root directory of TokenDisk diskette #2 to the C:\IBMCOM\MACS directory. DOS LAN Support (DXMAID) Installation 1. At the DOS prompt on a DOS machine, run the DXMAID installer from the IBM LAN Support Program diskette. 2. Press ENTER at the first three Information screens. 3. From the Setup screen, press ENTER to accept all the default values. 4. Insert the TokenDisk diskette in the floppy drive. 5. From the Process Driver Diskette screen, enter the path name of the NDIS driver on the TokenDisk : A:\NDIS2\DOS 6. Insert the LAN Support Program diskette into the floppy drive when prompted. 7. The Primary Adapter Driver shown is 3Com TokenLink Velocity PCI Token Ring Adapter. Press F4 to install the driver. This completes the installation of DXMAID. Reboot and install IBM LAN Server 4.0 if not installed yet. DOS LAN Services Installation 1. On a DOS machine, create a temporary directory, for example : MKDIR C:\TEMP 2. Insert the TokenDisk diskette in the floppy drive. 3. Copy the following files from the TokenDisk to the temporary directory. COPY A:\NDIS2\DOS\OEMSETUP.INF C:\TEMP COPY A:\NDIS2\DOS\TLPN2.DOS C:\TEMP COPY A:\TLNKP.MAC C:\TEMP 4. Insert the IBM DOS LAN Services disk 1 in the floppy drive. 5. From the DOS prompt, enter A:\INSTALL 6. Press ENTER at the welcome screen. 7. Press ENTER to accept default directory C:\NET as the location to install DOS LAN Services. 8. From the list of network cards presented, select NETWORK CARD NOT SHOWN IN LIST BELOW. 9. Enter the path of the temporary directory where the oemsetup.inf file is: C:\TEMP 10. The 3Com TokenLink Velocity PCI Token Ring Adapter network card is highlighted. Press ENTER to select the network card. 11. Enter the machine ID, user name and domain name. 12. Press Enter to accept the list of options chosen. 13. Finish installing files from the DOS LAN Services diskettes. NOTE: Known Limitation: The installer does not copy the driver and microcode. Copy the driver and microcode from C:\TEMP to C:\NET. COPY C:\TEMP\TLPN2.DOS C:\NET COPY C:\TEMP\TLNKP.MAC C:\NET This completes the installation of DOS LAN Services. IBM LAN Server 3.0 ------------------ IBM LAN Server 3.0 contains an installer for both OS/2 (LAPS) and DOS (DXMAID). Both of these installation utilities fully support OEM network adapter driver import capability. DOS Installation 1. Run the DXMAID installer from the IBM LAN Support diskette. 2. From the first menu, select YES - HAVE ADAPTER OPTION DISK. 3. Remove the LAN Support diskette, put the 3Com TokenDisk diskette #2 in the floppy drive, and type A:\NDIS2\DOS for the drive and path. 4. Select F4 to install 3Com TokenLink Velocity PCI Token Ring Adapter. The installer will pause after it copies the files needed from the TokenDisk diskette. 6. Place the LAN Support diskette back in the drive, and continue with the installation. OS/2 Installation 1. Run the LAPS installer from the LAN Adapter and Protocol diskette. 2. From the first menu, select the INSTALL option. 3. Enter target drive e.g. C. 4. LAPS then installs itself and other files. Click OK when done to return to the first menu. 5. Select INSTALL again. 6. Remove the LAPS diskette and insert the TokenDisk diskette in the floppy drive. Type A:\NDIS2\OS2 for the drive and path. Click OK. 7. LAPS will copy the needed files from the TokenDisk diskette. When the acknowledge message appears at the end of the copy, click OK. 8. Reinsert the LAPS diskette. Click OK. Continue with the installation by configuring the driver as prompted. 9. Click CONFIGURE. 10. Select CONFIGURE LAN TRANSPORTS. Click CONTINUE. 11. Select 3Com TokenLink Velocity PCI XL Adapter for OS2 from the NETWORK ADAPTERS box. Click ADD. 12. Select protocols required. Click ADD for each protocol to add. 13. Select OK when complete. 14. Continue with installation or exit as prompted. 15. Copy the microcode file TLNKP.MAC from the root directory of TokenDisk diskette #2 to the C:\IBMCOM\MACS directory. (%VER LANSRV.TXT - IBM LAN Server Installation Notes V1.0e)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.