Hardware specifications v3.03 Specifications for the EtherExpress(TM) PRO/10+ adapter ====================================================== System compatibility -------------------- IBM AT*, EISA, and 100% compatibles, Plug and Play compatibles Cable connectors ---------------- - RJ45 (PCLA8220A, PCLA8225B) - RJ45/BNC (PCLA8210A, PCLA8215B) - RJ45/BNC/AUI (PCLA8200A, PCLA8205B) Data transfer mode ------------------ 8- or 16-bit programmed I/O Ethernet controller ------------------- Intel 82595FX with concurrent processing. Interrupt levels ---------------- 3, 4, 5, 7, 9, 10, 11, and 12 I/O address ----------- 25 settings over the range 200H-39F on 16-byte boundaries. SRAM memory ----------- 32 Kbytes Flash memory ------------ 256 Kbytes on flash-equipped models. Power requirements ------------------ 0.5 Watts @ +5 VDC Isolation voltage ----------------- 200V RMS Operating temperature --------------------- 0 - 55 degrees C Humidity -------- 10% - 90% non-condensing Dimensions ---------- 3.5 inches by 6 inches Diagnostic LEDs --------------- Activity and Link Diagnostic software ------------------- On-board, on-network, responder Certifications -------------- - FCC Part 15, Class B - EN550222 Class B - EN50082-1 Warranty -------- Limited lifetime -- see manual for details Mean time between failures (MTBF) ================================= Product code Connector MTBF ----------------------------------- PCLA822xB TPE 162 years PCLA821xB TPE, BNC 75 years PCLA820xB TPE, BNC, AUI 72 years * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.