; NETEE16.INX ; ; Intel Network Interface Cards. ; ; Copyright 1993-1995, Microsoft Corporation ; ; PROSet Ver 1.35 [version] LayoutFile=layout.inf signature="$CHICAGO$" Class=Net provider=%V_MS% [Manufacturer] %V_INTEL%=INTEL [INTEL] %*pnp8132.devicedesc%=*pnp8132.ndi, *pnp8132 ; Intel EtherExpress PRO/10+ %*INT1031.devicedesc%=*INT1031.ndi, *INT1031 ; Intel EtherExpress PRO/10+ (PnP) ;**************************************************************************** ; *INT1031 Intel EtherExpress PRO/10+ ;**************************************************************************** [*INT1031.ndi] AddReg=*INT1031.ndi.reg,epro.reg CopyFiles=epro.ndi.Copyfiles [*INT1031.ndi.reg] HKR,Ndi,DeviceID,,"*INT1031" HKR,Ndi,NdiInstaller,,"EPRONDI.DLL,EProNdiProc" [*INT1031.ndi.PosDup] *pnp8132 ;**************************************************************************** ; *PNP8132 Intel EtherExpress PRO/10+ ;**************************************************************************** [*PNP8132.ndi] AddReg=*pnp8132.ndi.reg,epro.reg LogConfig=*pnp8132.LogConfig [*PNP8132.ndi.reg] HKR,Ndi,DeviceID,,"*PNP8132" [*PNP8132.LogConfig] IRQConfig=3,4,5,7,9,10,11,12 IOConfig=10@200-3FF%FFF0(3FF::) ConfigPriority=HARDRECONFIG ;**************************************************************************** ; Epro base ;**************************************************************************** [Epro.reg] ; key,subkey,valuname,type,value HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,epro.vxd HKR,,EnumPropPages,,"eprops.dll,EnumPropPages" ; NDIS Info HKR,NDIS,LogDriverName,,"EPRO" HKR,NDIS,MajorNdisVersion,1,03 HKR,NDIS,MinorNdisVersion,1,0A HKR,NDIS\NDIS2,DriverName,,"EPRO$" HKR,NDIS\NDIS2,FileName,,"epro.dos" HKR,NDIS\ODI,DriverName,,"eproodi" HKR,NDIS\ODI,FileName,,"eproodi.com" ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndis2,ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis2,ndis3,odi" HKR,Ndi\Interfaces,LowerRange,,"ethernet" ; Install sectioins HKR,Ndi\Install,ndis3,,"EPRO.ndis3" HKR,Ndi\Install,ndis2,,"EPRO.ndis2" ;HKR,Ndi\Install,odi,,"EPRO.odi" ; Resources HKR,,INTERRUPT,1,04,00,00,00 HKR,,IOADDRESS,1,02,00,00,00 HKR,NDI\params\INTERRUPT,resc,1,04,00,00,00 HKR,Ndi\params\INTERRUPT,ParamDesc,,"Interrupt Level" HKR,NDI\params\INTERRUPT,flag,1,30,00,00,00 HKR,Ndi\params\ioaddress,resc,1,02,00,00,00 HKR,Ndi\params\ioaddress,ParamDesc,,"I/O Base Address" HKR,NDI\params\ioaddress,flag,1,30,00,00,00 ; Transceiver Type HKR,Ndi\params\TRANSCEIVER,ParamDesc,,"Transceiver Type" HKR,NDI\params\TRANSCEIVER,flag,1,20,00,00,00 HKR,Ndi\params\TRANSCEIVER,default,,"4" HKR,Ndi\params\TRANSCEIVER,type,,enum HKR,Ndi\params\TRANSCEIVER\enum,"1",,"AUI Connector" HKR,Ndi\params\TRANSCEIVER\enum,"2",,"BNC Connector" HKR,Ndi\params\TRANSCEIVER\enum,"3",,"TPE Connector" HKR,Ndi\params\TRANSCEIVER\enum,"4",,"Auto-Connector" ; Duplex Settings HKR,Ndi\params\ForceDpx,ParamDesc,,"Duplex Setting" HKR,Ndi\params\ForceDpx,flag,1,20,00,00,00 HKR,Ndi\params\ForceDpx,default,,"1" HKR,Ndi\params\ForceDpx,type,,enum HKR,Ndi\params\ForceDpx\enum,"0",,"Auto Negotiate" HKR,Ndi\params\ForceDpx\enum,"1",,"Force Half-Duplex" HKR,Ndi\params\ForceDpx\enum,"2",,"Force Full-Duplex" ; Power Management Settings HKR,Ndi\params\PowerMgt,ParamDesc,,"Power Management" HKR,Ndi\params\PowerMgt,flag,1,20,00,00,00 HKR,Ndi\params\PowerMgt,default,,"0" HKR,Ndi\params\PowerMgt,type,,enum HKR,Ndi\params\PowerMgt\enum,"0",,"Off" HKR,Ndi\params\PowerMgt\enum,"1",,"On" ; PROSet parameters HKLM,System\CurrentControlSet\Services\PROSet\Adapters,EPRO10,,"Intel EtherExpress PRO/10" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,AutoIOEnable,1,01,00,00,00 HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,PnPIOEnable,1,01,00,00,00 HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Configure,,"EPRO10_Configure" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Detect,,"EPRO10_Detect" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Diagnose,,"EPRO10_Diagnose" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,DLL,,"EPRO10.DLL" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,RegistryKey,,"EPRO10_GetRegistryKey" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Summary,,"EPRO10_Resource_Summary" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,AdapterDescription,,"EPRO10_GetAdapterDescription" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Adapter,,"Intel EtherExpress PRO/10 Adapter" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10,Help,,"EPROSET.HLP" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,Concproc,,"1,2,Concurrent Processing,0,4,On,On,1,Off,0" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,PnP,,"1,3,Plug and Play,0,4,On,On,1,Off,0" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,Force8,,"1,2,Force 8-Bit Mode,0,4,Off,On,1,Off,0" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,ForceDpx,,"1,4,Duplex Mode,0,1,Half,Auto,Half,Full" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,IoChannelReady,,"0,7,IoChannelReady,0,2,2,0,2,1" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,PowerMgt,,"1,4,Power Management,0,4,Off,On,1,Off,0" HKLM,System\CurrentControlSet\Services\PROSet\EPRO10\Parameters,RPL,,"1,2,Remote Boot,0,4,None,None,0,ODI,2,NDIS,3" ; Copy EPRO NDI Installer [epro.ndi.Copyfiles] eprondi.dll ; Install NDIS3 [epro.ndis3] CopyFiles=epro.Inf.CopyFiles,epro.ndis3.CopyFiles [epro.ndis3.CopyFiles] epro.vxd, WIN95\epro.vx_ ; PROSet Files PROSET.EXE, nt\PROSET.EX_ EPRODIAG.DLL, nt\EPRODIAG.DL_ PROKDD.DLL, nt\PROKDD.DL_ MFC30.DLL, MFC30.DLL MSVCRT20.DLL, MSVCRT20.DLL EPROSET.HLP, nt\EPROSET.HL_ CTL3D32.DLL, nt\CTL3D32.DL_ EPRO10.DLL, nt\EPRO10.DL_ RESMGR.DLL, nt\RESMGR.DL_ EPROPS.DLL, WIN95\EPROPS.DL_ PROW95.VXD, WIN95\PROW95.VX_ ; PROSet-Drivers EPRODIAG.VXD, WIN95\EPRODIAG.VX_ ; Install NDIS2 [epro.ndis2] CopyFiles=epro.Inf.CopyFiles,epro.ndis2.CopyFiles [epro.ndis2.CopyFiles] epro.dos, ndis\epro.dos ; Install ODI [epro.odi] CopyFiles=epro.Inf.CopyFiles,epro.odi.CopyFiles [epro.odi.CopyFiles] eproodi.com, nwclient\eproodi.com [epro.Inf.CopyFiles] netpro10.inf ;**************************************************************************** ; Destination Directories ;**************************************************************************** [DestinationDirs] DefaultDestDir =11 ; LDID_SYS epro.ndis3.CopyFiles =11 epro.ndis2.CopyFiles =26 ; LDID_WINBOOT epro.odi.CopyFiles =26 epro.inf.CopyFiles =17 ; INF_DIR epro.ndi.Copyfiles =11 ; LDID_SYS ;**************************************************************************** ; Localizable Strings ;**************************************************************************** [strings] ; Provider V_MS="Microsoft" ; Manufacturers V_INTEL="Intel" ; PNP Devices *pnp8132.devicedesc="Intel EtherExpress(TM) PRO/10+" *INT1031.devicedesc="Intel EtherExpress(TM) PRO/10+ (PnP Enabled)"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.