1. 10i4i410.exe Driver
2. MSNT35.TXT File Contents

MSNT35.TXT Driver File Contents (10i4i410.exe)

   Windows NT 3.5x
                                                                    v3.08


Microsoft Windows* NT* 3.5x Installation Notes for Intel's
EtherExpress(TM) PRO/10 Adapter
========================================================================


Requirements
------------

-  Make sure you are using Intel EtherExpress(TM) PRO/10 adapter disk SW
   release 3.0 or later. If you don't have this release, you can get it
   from one of Intel's online services. For more information, see the
   help file called Using Intel's Automated Customer Support.


General Installation
====================

If you haven't installed Windows NT 3.5x
---------------------------------------
If you have a flash adapter, the first time you turn on the computer
you'll see the configuration program running from the adapter's flash
memory. Exit this program.

1. Install NT. During NT Setup, you're asked to select a Network Adapter
   Card.
   
   -  Select "<Other>" from the list. Insert either the EtherExpress
      PRO/10 adapter disk SW Release 3.0 or greater, or a disk with the
      downloaded BBS driver files.

2. When prompted, enter A:\NT as the path to the driver.

3. The Intel PRO adapter setup program automatically scans computer
   resources and assigns conflict-free settings to your adapter.

4. Click the Test button.

   If you've just added the adapter, the network driver won't be active,
   and the diagnostics will test the adapter and its network connection.

5. When NT Setup finishes, restart your computer and use the File Manager
   to connect to the network.

If you've already installed Windows NT 3.5x
------------------------------------------

If you have a flash adapter, the first time you turn on the computer
you'll see the configuration program running from the adapter's flash
memory. Exit this program.

1. In Windows NT, select the Network icon in the Control Panel, then
   choose Add Adapter.

2. When the list of available adapters displays, select "<Other>" at the
   end of the list.

3. Insert the EtherExpress PRO/10 adapter disk SW release 3.0 or greater,
   or a disk with the downloaded BBS driver files.

4. When prompted, enter A:\NT as the path to the driver.

5. The Intel PRO adapter setup program automatically scans computer
   resources and assigns conflict-free settings to your adapter.

6. Click the Test button.

   If you've just added the adapter, the network driver won't be active,
   and the diagnostics will test the adapter and its network connection.

7. Choose OK to accept the adapter's configuration.

8. Restart Windows NT when prompted. Use the File Manager to connect to
   the network.



Troubleshooting
===============

-  Make sure the adapter is seated firmly in the slot.

-  Make sure the network cable is securely attached.

-  If Windows NT can't find the adapter, disable Plug and Play using
   SoftSet2's Advanced Options menu. You must reboot to DOS to run
   SoftSet2. After disabling Plug and Play, reboot Windows NT.

-  If you experience problems with your EtherExpress PRO/10 adapter after
   adding another Plug and Play device to your computer, run the Intel
   PRO Adapter Setup program again and reconfigure the adapter. To run
   the Intel PRO adapter setup program, double-click the system icon in
   Control Panel, then click "Intel PRO/10 adapter" from the Installed
   Adapter Cards list box, then click Configure.

-  Test the adapter.

   Follow these steps to use the Intel PRO Adapter setup program's Test
   feature:
   
      1.   Open the Control Panel, then double-click the Network icon.
   
      2.   Select "Intel PRO/10 adapter" from the Installed Adapter Cards
      list box.
   
      3.   Choose "Configure," then choose "Test."

     If you've just installed the adapter, the network driver won't be
active, and the diagnostics will test the adapter and its network
connection.

     If you're testing an adapter that has already been installed, the
network driver will probably be active, and the diagnostics will test the
driver and track the driver's actual network activity.

-  Check with your LAN administrator; you may need to install
   supplemental networking software.

-  If the Intel PRO adapter setup program won't run, or power management
   and full duplex mode aren't available, try updating the adapter's
   driver: From the Network Setup window, select the adapter, choose
   Remove, then follow the "If you've already installed Windows NT 3.5x"
   instructions above.



*  Third-party trademarks are the property of their respective owners.