1. alg23w95.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (alg23w95.zip)

Instructions for Installing an Avance Logic Video Card in Conjunction with Windows 95

Case1: 	Windows 95 is not installed on the system and an Avance Logic video 	card is Installed on the system motherboard.
		
	1.  Install Windows '95 by following the manufacturer's installation 	procedure.

	2.  Double click on the My Computer icon when the installation is 	complete to bring up the My Computer window.

	3.  Double click on the Control Panel icon to bring up the Control 	Panel window.

	4.  Double click on the Display icon to bring up the Display 		Properties window.

	5.  Click on the Settings tab to bring the Settings page of the 	Display Properties window to the front.

	6.  Click on the [Change Display Type] button to bring up the Change 	Display Type window.

	7.  Click on the [Change .....] button in the Adapter Type section of 	this window to bring up the Selection Device window.

	8.  Click on the [Have Disk] button to bring up th Install From Disk 	window. Follow the instructions in this window for inserting the 	diskette containing the driver into the selected diskette driver and 	then click on the [OK] button to bring up another Select Device 	window.

	9.  Insure that "Avance Logic 2301 PCI" is highlighed in the Select 	Device window and then click on the [OK] button. The Copying Files 	information box will come up indicating that files are being copied 	to the hard disk driver. When the copying is complete, the Change 	Display Type window will return.

	10. Click on the [Change.....] button in the Monitor Type selection 	of the Change Display Type window and follow the instructions for 	selecting the appropriate monitor type.

	11. Click on [Close] button in the Change Display Type window to 	bring back the Display Properties window.

	12. Select the desired resolution, color, and font size values in the 	Display Properties window and then click on the [Apply] button to 	bring back the System Settings Change window.

	13. Click on the [Yes] button in the System Settings Change window to 	restart the system and activate the new settings.

Case 2: Windows 95 is installed on the system and a video card other than an 	Avance Logic video card is installed on the system motherboard.


	Note: It is recommend that the video mode be set to Standard VGA 	before beginning this installation.

	1.  Power of the system, remove the existing video card, and install 	the Avance Logic video card.

	2.  Power on the system. The New Hardware Found window will be 		displayed. In this window, select "Driver from disk provided by 	hardware Manufacturer." and then click on the [OK] button to bring up 	the Install From Disk window.

	3.  Follow the instructions in the Install From Disk window for 	inserting the diskette containing the driver into the selected 		diskette drive and then click on the [OK] button to bring up Select 		Device window.

	4.  Insure that "Avance Logic 2301 PCI" is highlighted in the Select 	Device window and then click on the [OK] button. The Copyiong Files 	message box will come up indicating that files are being copied to 	the hard disk drive. When the copying is complete, the Change Display 	Type window will comp up.

	5.  Click on the [Change .....] button in the monitor Type selection 	of the Change Display Type window and follow the instruction for 	selecting the appropriate monitor type. This step may be skipped if 	the correct monitor type was selected previously.

	6.  Click on the [Close] button in the Change Display Type window to 	bring up the Display Properties window.

	7.  Select the desired resolution, color, and font size values in 	Display Properties window and then click on the [Apply button to 	bring back the System Settings Change window.

	8.  Click on the [Yes] button in the System Settings Change window to 	restart the system and activate the new settings.