******************************************************************************************
CY25 System BIOS Release Notification 05/13/2003
* File name: CY25113S.ROM
* Checksum : 668A
* VBIOS Ver: 1.10.8B Release on 05/09
* Based on CY25112S.ROM
*Implement Notification:
1. Update VGA BIOS to V1.10.8B (V1108B-1.509)
*Issue Fixed:
1. Fixed issue that display light glisten.
******************************************************************************************
CY25 System BIOS Release Notification 04/17/2003
* File name: CY25112S.ROM
* Checksum : 36F2
* VBIOS Ver: 1.10.8A Release on 03/25
* Based on CY25111S.ROM
*Implement Notification:
1. Update VGA BIOS to V1.10.8A (V1108A-1.325)
Fixed issue:
1. Fixed ripple display when resuming from S3.
*Issue Fixed:
1. Add the "Allow user to change boot sequence" selection in BIOS
Setup menu to Enable/Disable change boot sequence by pressing
ESC when POST for ERGO requirement.
******************************************************************************************
CY25 System BIOS Release Notification 01/28/2003
* File name: CY25111S.ROM
* Checksum : 42D6
* VBIOS Ver: 1.10.7X Release on 10/31
* Based on CY25110S.ROM
*Implement Notification:
1. Add WLAN 802.11A+B ID
*Issue Fixed:
1. Fixed system can't show correct Cache size during POST with Celeron CPU.
2. Fixed the WinXP HCT11.0 ACPI Stress test failed issue.
3. Fixed the WinXP HCT11.0 ACPI Verifier test failed issue.
******************************************************************************************
CY25 System BIOS Release Notification 11/25/2002
* File name: CY25110S.ROM
* Checksum : D743
* VBIOS Ver: 1.10.7X Release on 10/31
* Based on CY25109S.ROM
*Implement Notification:
1. Update ERGO POST LOGO
******************************************************************************************
CY25 System BIOS Release Notification 10/09/2002
* File name: CY25109S.ROM
* Checksum : ED47
* VBIOS Ver: 1.10.7X Release on 10/31
* Based on CY25108S.ROM
*Implement Notification:
1. Implement Flash LOGO ROM using Flash Utility.
2. Update the VGA BIOS to V1.10.7X (V1107X-1.A31)
Fixed issue:
1. Modify new EMI parameter.
3. Update TTX POST LOGO
******************************************************************************************
CY25 System BIOS Release Notification 10/09/2002
* File name: CY25108S.ROM
* Checksum : A5BD
* VBIOS Ver: 1.10.7W Release on 10/09
* Based on CY25107S.ROM
*Implement Notification:
1. Implement Flash LOGO ROM using Flash Utility.
2. Update the VGA BIOS to V1.10.7W (V1107W-1.A09)
Fixed issue:
1. Set reserved panel ID to force CRT only
2. Fixed LCD display garbage when setting TV-OUT under WinXP on
CPT SXGA+ panel
*Issue Fixed:
1. Fixed system can't show current Cache size during POST
2. Fixed system hang on debug code "B9" when panel ID DIPswitch was 0xFh.
******************************************************************************************
CY25 System BIOS Release Notification 08/21/2002
* File name: CY25106S.ROM
* Checksum : D966
* VBIOS Ver: 1.10.7N Release on 8/19
* Based on CY25105S.ROM
*Implement Notification:
1. Implement Flash LOGO ROM using Flash Utility.
2. Update the VGA BIOS to V1.10.7U (V1107U-1.923)
Fixed issue:
1. Add Panel ID 10 for TOPPOLY TD141TGCB1 XGA 14.1"
2. Fixed display garbage when running 3D screen saver under WinXP
3. Fixed LCD display garbage when setting TV-OUT under WinXP on
IBM panel
*Issue Fixed:
1. Fixed time out to Hibernate failed
2. Fixed SWDL function failed
******************************************************************************************
CY25 System BIOS Release Notification 07/09/2002
* File name: CY25105S.ROM
* VBIOS Ver: 1.10.6S Release on 6/13
* Based on CY25104S.ROM
*Implement Notification:
1. Update the VGA BIOS to 1.10.6S for fix that VGA sometimes did not display in room
temperature.
2. Update PLATFORM.BIN to support that NS87591L/S Rev.C2
Inform the EC into idle Mode before flash and clean cmosBBChecksumAddr after flash.
*Issue Fixed:
1. Fixed the Wireless indicator (LED) does not work correct problem.
(Must use the EC BIOS Rev. 1.05 or later)
2. Fixed the COM Port status asynchronous for BIOS Setup menu
and WindowsXP/Windows2000.
3. Fixed the NumLock function/LED abnormal under DOS.
4. Fixed pressed the any key will cause the keyboard and touchpad lockup while Windows
2000 at startup process.
5. Fixed mouse moving will cause system shut down or access EEPROM error in power on
process.
6. Fixed mouse moving will cause "Stuck Key" error after system reboot.
******************************************************************************************
CY25 System BIOS Release Notification 6/18/2002
* File name: CY25104S.ROM
* VBIOS Ver: 1.10.6R Release on 6/11
* Based on CY25101S.ROM
*Implement Notification:
1. Update the VGA BIOS to 1.10.6R
2. Implement Intel SpeedStep function on W2K.
3. Change the EEPROM reading policy for following three items:
Series Number, Asset Tag Number and UUID.
The string of Product Name and Manufacture are fixed by BIOS.
*Issue Fixed:
1. Fixed system busy when press Hot-Key(Brightness) after resume from standby mode.
2. Disable change CPU speed during accessing FDD on WinXP.
3. Fixed the phantom drive when boot with USB floopy attached in WinXP
4. Update CMOS from EEPROM after load default in setup menu
5. Fixed the Lid switch doesn't work correct after change the action
from None to other items under Windows 2000.
6. Update the VBIOS to fixing the Macrovision and white screen issue.
7. Fixed the Memory detection error during POST.
Error Message: 0232:Extended RAM Failed at offset: 1D
8. Disable showing "Entering Setup" when press "F2" key at BootMenu
9. Disable Speed-Step function on APM mode.
(Skip system hang during APM mode when insert/remove AC power.)
******************************************************************************************
CY25 System BIOS Release Notification 6/03/2002
* File name: CY25101S.ROM
* VBIOS Ver: 1.10.6L Release on 5/24
* Based on CY25100S.ROM
*Implement Notification:
1. Change the Series Number from 20 characters to 22 characters in setup menu.
2. Turn off NumLock LED when power on teh system.
*Issue Fixed:
1. Fixed the system will be hold 2 seconds when adjusting the brightness by hot-key
after resume from standby.
2. Fixed sometimes system hangs during accessing FDD under WinXP.
******************************************************************************************
CY25 System BIOS Release Notification 05/17/2002
* File name: CY25100S.ROM
* VBIOS Ver: 1.10.6H Release on 5/13
* Based on CY25019S.ROM
*Implement Notification:
1. Reduce the POST time
2. Clear the Fast-Boot-Flag in EC memory
3. Update VGA BIOS to v1.10.6H
*Issue Fixed:
1. Display the correct speed of CPU in SMBIOS
2. Fixed trying to unlock the HDD if password is set and no HDD present
3. Fixed the SXGA+ changing display mode will take a long time in POST.
4. Modify correct information strings in summery screen of POST.
5. Fixed the MDP issue. (S3 resume time)
6. Fixed the Intel(r) Speedstep(r) Technology option malfunction in BIOS setup menu.
(Under DOS Mode, Plug-in/Out the AC, will make the CPU change the speed)
7. Fixed the resume from S3 will cause the system slow respond under Windows2000.
**************************************************************************
CY25 System BIOS Release Notification 05/10/2002
* File name : CY25019S.ROM
* Checksum : FE2B
* [VGA Version] = 1.10.6G(5/09)
*Implement Notification:
1. Based on CY25018S.ROM
2. Update VGA BIOS v1.10.6G
(Fix: 1. Update VGABIOS for display garbage after resume from S3
2. Fixed AU UB141X03 power on no display when choose
"Auto-Selected" selection of boot display device in SETUP
menu)
*Issue Fixed:
1. AC012 - Run "Compal Rebooter" and it fails in 111st trial then
system hangs
2. CC018 - Multi-Tasking burn-in with AC timer/System hang up)
3. Fixed display garbage after resume from S3
4. Fixed AU UB141X03 power on no display when choose "Auto-Selected"
of selection of boot display device in SETUP menu
**************************************************************************
CY25 System BIOS Release Notification 05/09/2002
* File name : CY25018S.ROM
* Checksum : AA90
* [VGA Version] = 1.10.6D(5/03)
*Implement Notification:
1. Based on CY25017S.ROM
2. Modify LPC register default setting for meet SIS961 SPEC.
3. Modify IEEE1394 ASL code.
4. Implement SPD support
5. Update VGA BIOS v1.10.6D
(Fix: 1. TV output by Composite
2. Feature modify : Device auto switch when power on)
6. Update Micro Code for NorthWood Processor
7. System shutdown after press power button on APM mode
8. Modify CardBus register for HCT 1394 PC Card testing failed
issue
9. Modify access MAC address method to display on SETUP menu and
Summary
10. Modify access ESN from EEPROM method to display on SETUP menu
and Summary
11. Modify SETUP menu for CY25
*Issue Fixed:
1. BC198 - Mitsubishi 512 M DDR Memtest failed
2. CC027 - System bacame blue screen while running 3DWinbench 2000
v1.1 at 40C chamber
3. CC031 - Program interrupted cause by system pop up a warning
message while running 3D Mark2001 SE
**************************************************************************
CY25 System BIOS Release Notification 05/01/2002
* File name : CY25017S.ROM
* Checksum : 2F3D
* [VGA Version] = 1.10.6C(4/29)
*Implement Notification:
1. Based on CY25016S.ROM
2. Modify PCMAIA device initial code.
3. Modify USB ASL code
4. Modify "nm.bat" for forget update FastBoot utility "BB".
5. Update tool600\asl.exe tools, it is for compiler _OSI warning
message.
6. Update IRQ for AGP device
7. Remove USB caused the wake event.
8. Reduce S3 resume time.
9. Modify Battery ASL code.
10. Modify PCI devices IRQ rounting table.
11. Add BY25&CY25 folder for BY25&CY25 Project
12. Set thermal throttling duty cycle at 12.5%.
13. Update PLATFORM.BIN for EC bootblock increase from 8k to 24k
14. Added ASL for support Samsung Battery
*Issue Fixed:
1. Change the message from "Administrator" to "Supervisor" in Security
of Setup menu
2. Update VGA BIOS 1.10.6C
3. Modify can't switch display device to CRT after POST CRT connected
4. Implement fast access EEPROM for fast boot & display UUID in Setup
menu & write UUID to DMI
**************************************************************************
CY25 System BIOS Release Notification 04/25/2002
* File name : CY25016S.ROM
* Checksum : CD91
* [VGA Version] = 1.10.6A(4/24)
*Implement Notification:
1. Based on CY25015S.ROM
2. Disable floppy boot when resume from S4
3. Fixed show DVD delay
4. Implement Legacy USB function
5. Update new LOGO
6. Update new VGA BIOS from 1.10.1E to 1.10.6A.
**************************************************************************
CY25 System BIOS Release Notification 04/17/2002
* File name : CY25015S.ROM
* Checksum : 5C42
* [VGA Version] = 1.10.1E(4/16)
*Implement Notification:
1. Based on CY25013S.ROM
2. Update EC BIOS & add the utility for load Setup default and write
UUID to EEPROM
3. Move UUID address from A0 to C0 & fixed EEPROM write MAC address
with wrong value
4. Fixed display garbage while no boot device
5. Implement Hot-Key funtion during DOS mode
6. Fixed system reboot fail
7. Implement Fn + F5 hot-key function(Switch display device)
8. Disable Legacy USB during access EEPROM
9. Implement Hot-Key funtion during Windows XP
10. Update Fn+F5 for can't automatic detect CRT
11. Pull in the S3 save/restore code for super I/O
12. Pull in the ASL code of @Power for thermal evaluation propuse
13. Update VGA BIOS
14. Update Setup Menu for request
*Issue Fixed:
1. AC035 - Run "DOS Reboot" failed and LCD nodisplay
2. AC045 - USB keyboard does not work in POST, BIOS Setup Menu, and DOS
3. AC065 - The hot keys Fn + F4/F5/F6 does not work
4. BC030 - The AGP Transfer test failed with HCT 10.0 under Windows XP
5. BC185 - LCD brightness volume can not save to CMOS
6. The DDC2B malfunction
**************************************************************************
CY25 System BIOS Release Notification 04/10/2002
* File name : CY25013S.ROM
* Checksum : 0456
* [VGA Version] = 1.10.1C(4/10)
*Implement Notification:
1. Based on CY25012S.ROM
2. Update platform.bin for 12K BootBlock and CrisDisk
3. Update Hardware Strap for reboot fail issue
4. Update Super I/O ASL code by A51 team common code
5. Update ISA device ASL code for HCT verify test fail
6. Update USB ASL code for wakp-up register 44h
7. Disable S1 support
*Issue Fixed:
1. BC030 - The "AGP Transfer" test failed with HCT 10.0 under Windows XP
2. BC174 - When resume from S3 state will cause the IBM ITSX95C panel
occur waves screen
3. BC201 - Power on the system---Display garbage(white screen)
4. When power on the system will cause gray screen and nothing on
the LCD screen
5. The VGA BIOS will take a long time for change display mode under DOS
6. The screen will right-shift around half screen on CRT monitor
when connected both CRT and LCD under DOS text mode
7. The DDC2B malfunction
8. The LCD backlight will be turn on/off for twice after Logo screen
show up and boot into DOS mode
9. The VGA BIOS can't work under both DOS mode with LCD only(display
backlight without data) and WinXP(display garbage)
10. Fixed BC198 The Mitsubishi 512MB memory test failed
**************************************************************************
CY25 System BIOS Release Notification 04/03/2002
* File name : CY25012S.ROM
* Checksum : ABD2
* [VGA Version] = 1.09.00(3/18)
*Implement Notification:
1. Update SubvendorID /SubsystemID for HCT test fail & DMI string
2. Increase the display time for F2 message during POST
3. Enabled CPU C1/C2/C3 state support
*Issue Fixed:
1. BC175 - CardBus Bridge Register==>Fail
2. BC177 - PCI 2.2 Compliance==>Fail
3. Fixed system can't access LAN MAC address
4. Fixed system can't wake up from Modem Ring
5. Fixed the Modem will failed to work after resume from S3
6. Fixed the SpeedStep cann't change the CPU speed after resume from S3
7. Update SubvendorID /SubsystemID for HCT test fail & DMI string
**************************************************************************
CY25 System BIOS Release Notification 03/20/2002
*File name : CY25010S.ROM
*Checksum : BAD9
[VGA Version] = 1.09.00
Notification:
1. Based on CY25009S.ROM
2. Update VGABIOS for 301LV,302 single link and 302 dual link VGA
test of SiS 302 chipset
3. Fixed ACPI S3 resume issue
4. Fixed Hynix_128MB DDRAM cause system restart while run 3DMark2001
5. Fixed Battery reporting related issues
6. Added ASL code for Compal thermal monitor & Intel SpeedStep 2.0
Supported
Issue Fixed:
BC019 - Failed to resume from S3
BC026 - The "Hinix 128 MB" ram cause system auto restart when run
"3DMark2001" demo test
AC055 - Run the battery mark 4.01, system can'tsent a power status
to system cause...
AC074 - The "Power Meter" icon placed on system tray does not refresh
power status when changing power source
BC021 - System wait to "Power Meter" and "Rundll32" before restarting
.This issue happens only when Battery is available
BC028 - While entering "power options properties", system became slow
motion if you want to change...
BC013 - The "Power Meter" icon cannot right away shows on destop while
double-click "Power Meter" icon on system tray
**************************************************************************
CY25 System BIOS Release Notification 03/13/2002
*File name : CY25009S.ROM
*Checksum : 1CED
[VGA Version] = 1.07.1c
Notification:
1. Based on CY25008S.ROM
2. Fix Audio device can not run under DOS mode issue
3. Implement SMBIOS 2.3.1
4. Implement F12 Boot from Lan function
5. Change VGA memory default to 16MB
6. Define PCI device Sub-System/Verdor ID information
Issue Fixed:
BC011 - During POST process, system reported "PXE-E61 Media
test failure, check cable"
**************************************************************************
CY25 System BIOS Release Notification 03/07/2002
*File name : CY25008S.ROM
*Checksum : 56D5
[VGA Version] = 1.07.1c
Notification:
1. Based on CY25007S.ROM
2. Enable RTC/Ring/PME Wake for S3 function
3. Update VGABIOS for single link VGA test of SiS 302 chipset
Issue Fixed:
AC002 - System auto restart when resume from Standby
AC042 - The "suspend.exe" S1/S3 does not resume automatically
**************************************************************************
CY25 System BIOS Release Notification 03/05/2002
*File name : CY25007S.ROM
*Checksum : F65A
[VGA Version] = 1.07.1b
Notification:
1. Based on CY25006S.ROM
2. Detect AC-Link modem device
Issue Fixed:
**************************************************************************
CY25 System BIOS Release Notification 03/01/2002
*File name : CY25006S.ROM
*Checksum : 5E8E
[VGA Version] = 1.07.1b
Notification:
1. Based on CY25005S.ROM
2. Implement panel ID feature
3. Implement Embedded share memory AGP VGA memory size feature
Issue Fixed:
AC014 - 3D Mark 2001 testing fails.It loopsthe scenrio in the
very beginning of tests
AC064 - There is no UMA information displayed in BIOS setup menu
**************************************************************************
CY25 System BIOS Release Notification 02/21/2002
*File name : CY25005S.ROM
*Checksum : 6A4F
[VGA Version] = 1.07.00
Notification:
1. Based on CY25004S.ROM
2. Fix Boot from LAN function
3. Show UUID number & ESN (Electronic Serial Number) in P.O.S.T.
4. Fix CardBus Function 0 Difficult to recognize 16 bit card
Issue Fixed:
AC053 - System can't detect Toshiba 2G PCMCIA HDD
AC058 - There is no ESN displayed in P.O.S.T.
AC061 - Boot from LAN is failed
AC062 - There is no UUID displayed in P.O.S.T.
**************************************************************************
CY25 System BIOS Release Notification 02/19/2002
*File name : CY25004S.ROM
*Checksum : C5C2
[VGA Version] = 1.07.00
Notification:
1. Based on CY25003S.ROM
2. Turn on UDMA-100 function
3. Display "F2" & "ESC" message during logo display
4. Power buttom suggests "Standby" function
Issue Fixed:
AC004 - System supports ATA-66, notthe suggested ATA-100.
AC029 - Power on the system---See the "Phoenix logt", at this
moment "ESC" & "F2" indicator should be appeared at
the bottom of the panel,...
AC021 - Power buttom does not react to what Power Options
suggests such as "standby"
**************************************************************************
CY25 System BIOS Release Notification 02/05/2002
*File name : CY25003S.ROM
*Checksum : E5B2
[VGA Version] = 1.07.00
Notification:
1. Based on CY25002S.ROM
2. Enable AC-Link Modem device
3. Initialion PCMCIA device.
4. Modify IRQ resource for VGA Driver can't install
5. Update VGA BIOS form 1.06.00 to 1.07.00 for TV-out
not function.
Issue Fixed:
AC025 - Modem item is not listed in device manager.
AC028 - The P4 1.4 G CPU only can run at 1.2G speed.
AC005 - Unable to detect both Lagecy and CardBus cards.
AC018 - Unable to report "Lid Switch" item in Power
Options Properties/Advanced.
AC011 - TV-out does not function.
**************************************************************************
CY25 System BIOS Release Notification 02/05/2002
*File name : CY25002S.ROM
*Checksum : 41F1
[VGA Version] = 65010126.rom
Notification:
1. Implememnt Super SMC227.
2. Change Bootblock code size form 16K to 64K.
3. Initialion PCMCIA device.
4. Modify IRQ resource for PCI device.
Issue Fixed:
AC001 - No LPT1 shown in Device Manager.
AC006 - Unable to connect NT server .
AC007 - 1394 has an exclamation mark in Device Manager and unable
to detect at least HDD.
AC023 - According to SW spec , no "Sleep buttion" item shows in
Power Options Properties/Advanced. But it can be found.
AC025 - Modem item is not listed in device manager.
AC033 - Floppy diskette drive is not available in OS but DOS.
**************************************************************************
CY25 System BIOS Release Notification 01/31/2002
*File name : CY25001S.ROM
*Checksum : 85A0
Notification:
1. release first version of BIOS for CY25
**************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.