ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º SYSTEM Readme File - updated on August 21, 1992 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ NOTE: This document contains information about the System BIOS, the System Utilities and the User's Guide. ------------------------------------------------------------------------------- *** System Utilities *** ------------------------------------------------------------------------------- Ver : 1.0 Date : August 21, 1992 < PASSWORD > At first, system password feature is 'Disabled'. If you want to set the password to protect an unauthorized access to your computer, use 'PASSWORD' utility in the system utilities diskette for setting password. 1. Insert the system utilities diskette into drive A, then key in 'PASSWORD' after DOS prompt, press <Enter> key. You can use this utility program in fixed disk. But you must insert system utilities diskette or any other diskette in <drive A:> for saving your password. A>PASSWORD<Enter> ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ The Password Utility ³ ³ ³ ³ Version 1.0 ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Now press any key to continue 2. Type your own password within 5 character to set it, then press the <Enter> key. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Enter Password: [.....] ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3. Retyping your password for verify, then press the <Enter> key. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Enter Password: [XXXXX] ³ ³ ³ ³ Verify Password: [XXXXX] ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 4. Now system save password to diskette in <drive A:> If you do not insert any diskette in drive A, you will see the message as follows: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ -Not ready reading drive A. ³ ³ ³ ³ Insert the floppy diskette,³ ³ and press enter. ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Otherwise, following message is appeared. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ³ ³ Password Enabled ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 5. Now your password is enabled. The diskette for saving your password will be needed when you forget password. If you want to change your new password, press <Esc> key. Then you can restart password utility procedure. Otherwise press <F3> key to quit this utility. 6. Now the system checks your password every time either power on or warm boot. Then you must enter the password after 'Enter Password:' message, and <Enter> key like this. Enter Password:XXXXX<Enter> If you enter password correctly, system booted succefully. But incorrect password entered, system writes error message and try again. System tries 3 times, and system halted. 7. If you want to disable the password feature, you can do that with the </> key. Then type your password followed by </> and <Enter> key like this. Enter Password:XXXXX/<Enter> Now the password feature is diabled. 8. If you've forgotten your password, you can disable it with the diskette saving your password. Insert the diskette in drive A and reboot your system. You will see a message as follows: Password disabled. Remove the diskette and press ENTER to reboot... Now password is disabled. *End of File*Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.