======================================== 336HSP PCMCIA Modem 33.6 kbps Data+Fax+Voice+Speakerphone Version 3.0.1us [USA Country Settings] [For Intel or AMD Pentium CPU Notebook] Drivers and Setup for Windows 95 Date : 16 May 1997 ========================================= ----------------------------------------------- 336 NSP Modem Setup and Software Installation ----------------------------------------------- Hardware Setup This modem select the COM Port and IRQ automatically. PCMCIA Setup using Windows 95 The setup procedure for PCMCIA or PnP is the same as most other devices of similar type. When the hardware is installed, and the computer is turn on, the device should be detected automatically. Windows 95 should ask you for the driver disk provided by the manufacturer. When it ask, insert the driver disk and click "OK". Windows 95 will try to find the driver files from the default floppy disk. If it can't find the files, it will ask you again for it location. Type in your floppy location like "A:" or "B:" If it does, then just click "OK" again and it should install properly with no further intervention. After the installation is completed, restart the computer and your modem is ready to work at your next startup. ----------------------------------------------- Basic Minimum System Requirement for 33.6 Modem ----------------------------------------------- 1. Intel Pentium-based PC -100 Mhz with 256K cache memory or faster -ISA-bus expansion slot 2. Windows 95 or Windows 3.1X and relevant applications. 3. Communication Software Package -------------------------- Features and specification -------------------------- DATA Supported Speeds (Baud Rate) 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400, 1200, 300. Supported Protocols V.34+, V.34, V.32bis, V.32, V.22bis, V.22, V.21, V.23, Bell 212A, Bell 103 Data Compression V.42bis, MNP 5 Error Correction V.42 LAPM, MNP 2,3,4 FAX Supported Speeds (Baud Rate) 14400, 12000, 9600, 7200, 4800, 2400, 300 Supported Protocols V.17, V.29, V.27ter, V.21 Channel 2 Group 3 EIA Class 1 GENERAL FEATURE Auto Fallback AT Commands Auto Selection of COM Port and IRQ settings Automatic Answering Signal Quality Monitoring and Auto Retrain Single Crystal Design Data/Fax/voice Auto Detection Automode High throughput Virtual UART, DTE rate up to 115,200 ISA BUS interface Low Power Consumption OPERATING SYSTEM COMPATIBILITY Windows 95 Windows 3.1x -------------------- Software Compability -------------------- Application Software Setup This modem uses Ties as the escape sequence. "+++". If your software does not recognized this modem (PCtel), try using Hayes compatible modem, with Generic Class 1 fax or "direct connect" under the modem's setup or configuration section. This Modem has tested and found no compatibility issues with the following Windows based applications (excluding the MSDOS-based applications). a. Data Modem Applications: BitCom 3.03 Qmodem Pro 95 CommWorks for Windows 1.0A SuperFax 6.0 CrossTalk for Windows 2.3 Trio Fax 4.1 HyperAccess for Windows 2.0 WinFax Lite 3.1 MS-Windows 3.1x Terminal Win Fax Pro 4.0 Bitware 3.30.08 WIN95 Network Dial Up SuperVoice 2.2d b. Fax Applications: BitFax Pro and Lite 3.07 QuickLink Fax 1.1.4.3 Delrina CommSuite 95 SuperFax 6.0 Eclipse Fax 6.0 Trio Fax 4.1 FaxTalk Plus 2.10 WinFax Lite 3.1 FaxWorks 3.0 WinFax Pro 4.0 Microsoft FAX c. On-Line Service and Internet Software: America OnLine 1.5 & 2.0 Netscape Navigator 3.0 CompuServe 1.2 - 1.4 Prodigy 1.0 Internet Chameleon 4.0.1.7 ReadAudio Player 3.0 Internet Explorer 3.0 Windows 95 Microsoft Network Internet Phone VDOLive Player d. Remote Access or Conferencing: Cosession for Windows 6.0 Proshare 1.5 pcAnywhere 2.0 VDOPhone Enhanced CUSEEME CinePhone MediaPhone Netmeeting e. Voice Mail Application: Cheyenne BitWare 3.30.08 Microsoft Phone Supervoice 2.2d f. Windows "Head to Head" Games: MechWarrior 2 Board Game for 2 The Real Deal CivNet Locus Lode Runner Online Microsoft Golf 2.0 ----------------- Fax Compatibility ----------------- This modem has been tested with the following fax machine and found no compatibility problem with the following fax machine/modems/cards: (1) AT&T DataPort (2) AT&T PPF200 (3) Brother Intellifax 600 (4) Brother Intellifax 950M (5) Brother Intellifax 2500 (6) Canon B70 (7) Canon L777 (8) Cardinal FaxTalk (9) Compaq 9600 PCMCIA (10) Dex 85 (11) Eiger 14.4 PCMCIA (12) Fujitsu Dex 740 (13) Global Village Teleport Bronze II (14) Hayes JetFax (15) Hayes Optima 14.4 (16) Hewlett Packard Fax-200 (17) Hewlett Packard OfficeJet (18) Intel SatisFAXion /400e (19) Konica 7310 (20) Megahertz PCMCIA Card (21) Minolta 3300 (22) Mita LDC-570 (23) Mita TC-170 (24) Motorola UDS 14.4 (25) Muratec F-56 (26) Muratec M-820 (27) NEC Nefax 480 (28) NEC SilentWriter 95 (29) New Media 14.4 PCMCIA (30) Okidata Okifax 2200 (31) Olivetti OFX-3100 (32) Panasonic PX-5 (33) Panasonic PX-150 (34) Panasonic PX-350 (35) Pitney Bowes 8050 (36) Practical Peripherals V.32bis (37) Ricoh 3500L (38) Ricoh Fax 240 (39) Sanyo SFX 11 (40) Scout 14.4 PCMCIA (41) Sharp FO-235 (42) Sharp FO-5400 (43) Sharp UX-104 (44) Supra 28.8 Macintosh (45) Supra FAX Modem V.32bis (FaxTalk) (46) Supra FAX Modem V.32bis (WinFax) (47) Toshiba TF-231 (48) Toshiba TF-501 (49) U.S. Robotics Sportster (50) U.S. Robotics Sportster 14.4 Internal (51) U.S. Robotics Sportster 28.8 (Macintosh) (52) U.S. Robotics WorldPort PCMCIA (53) Viva 14.4 Fax Modem (54) Xerox 7021 (55) Xerox 7024 (56) Xerox 7033 (57) Zoom Telephonics 14.4 Internal (58) Zoom Telephonics 9600 Internal (59) Zoom Telephonics V.32bisDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.