MDP7800V-U PCI Modem
===================
Drivers Version : 5.43
Section A: Important notice
Section B: Installation of MDP7800V-U modem drivers on Windows 95
OSR1 platform
Section C: Installation of MDP7800V-U modem drivers on Windows 95
OSR2 platform
Section D: Installation of MDP7800V-U modem drivers on Windows 98
platform
Section E: How to change the buzzer volume for Dial-Up Networking,
Phone Dialer and Hyperterminal
Section F: How to change the modem Country Profile
Section G: Technical Support
-------------------------------------------------------------------------------------------------
Section A:
Important notice
================
1. MDP7800V-U can be set up on Windows 95 OSR1, Windows 95 OSR2,
Windows 98 or Windows NT but no support on WIN3.x platform.
For set up on Windows NT, NT version of modem drivers are
used.
2. In case you need to refer to AT command set, the document
'Atcomset.doc' is in the Windows directory of your hard drive
after the driver installation.
-------------------------------------------------------------------------------------------------
Section B:
Installation of MDP7800V-U modem drivers on Windows 95 OSR1 platform
======================================================================
1. Win95 will automatically detect the MDP7800V-U PnP Modem Card
and displays the "New Hardware Found" dialog box.
2. Insert the installation disk provided into the floppy drive.
3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.
4. Type A:\ (or B:\) in the combo box and click OK.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings to resolve the
device conflict.
For further details, please refer to Trouble-shooting section in
Windows 95.
-------------------------------------------------------------------------------------------------
Section C:
Installation of MDP7800V-U modem drivers on Windows 95 OSR2 platform
=====================================================================
1. Win95 will automatically detect the MDP7800V-U PnP Modem Card
after which the system will prompt the "Update Device Driver
Wizard" dialog box.
2. Insert the installation disk provided into the floopy drive.
3. Click "Next" to let system search for an updated driver.
4. Click "Finish" to use the found driver.
5. Click "Ok" when prompted to insert the installation disk.
6. Change path to A:\ (or B:\) and click OK.
7. System will then automatically load all the necessary drivers and
files needed.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings to resolve the
device conflict.
For further details, please refer to Trouble-shooting section in
Windows 95.
Uninstallation
=============
Run deinstal.exe to uninstall MDP7800V-U modem drivers.
-------------------------------------------------------------------------------------------------
Section D:
Installation of PCI modem drivers on Windows 98 platform
=========================================================
Installation of modem drivers in Win98 is similar to Win95.
1. Windows 98 will automatically detect the PCI modem.
Click 'Next' to continue.
2. Insert the installation disk provided into the floppy drive.
3. Select 'Search for the best drivers for your device.
(Recommended)' and click 'Next' to continue.
4. Enable 'Floppy disk drives' selection and click 'Next' to continue.
5. Modem Driver will be found on the installation CD. Click
'Next' to continue.
6. Click 'Finish' to complete modem installation.
7. System will then automatically load all the necessary
drivers and files needed.
You might encounter some resource conflicts after loading
the PnP modem device (especially when there are non-Plug &
Play adaptors installed in your system). To alter the
resource configurations, go to Control Panel - System -
Device Manager and click on 'Modems'. Choose the modem device
and click on 'Properties'. You can change the settings to
resolve the device conflict.
For further details, please refer to Trouble-shooting section
in Windows 98.
Uninstalation
=============
Run deinstal.exe to uninstall PCI modem drivers.
-------------------------------------------------------------------------------------------------
Section E:
How to change the buzzer volume
===============================
Dial-Up Networking
==================
1. In the Dial-Up Networking folder, click on the icon for the
connection whose properties you want to change.
2. On the file menu, click Properties.
3. Click Configure.
4. Adjust the Speaker volume slider bar to change to volume
level desired.
Phone Dialer
============
1. In the Control Panel folder, double-click on Modems.
2. Click Configure.
3. Adjust the Speaker volume slider bar to change to volume
level desired.
Hyperterminal
=============
1. Key in ATL0 for low volume level.
2. Key in ATL2 for medium volume level.
3. Key in ATL3 for high volume level.
4. Key in ATM0 to mute the buzzer.
-------------------------------------------------------------------------------------------------
Section F:
How to change the modem country profile
=======================================
For better modem performance, please set the country profile to
the country where you are in. If the country profile is not
already set to the country where you are in, please do the
following :
Windows 95 :
Go to Control Panel. There is a country select utility called
'Modem Country Select'. Double click on it. Select the country
where you are in and click OK.
Windows 98 :
Go to Control Panel. Double click on Modems. Hightlight MDP7800
PCI modem. Click on Dialing Properties. Select the country
where you are in and click OK.
-------------------------------------------------------------------------------------------------
Section G:
Technical Support
=================
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* MDP7800V-U Modem Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.