Additional Information
56K ITU-T V.90 Standard & K56flex Modem
EM3850 (US) Version 1.21
========================
This file contains additional information and changes about the various
software that is not available at printing time.
AT Commands
===========
For Standard AND Enhanced AT Command Set, please refer to the document
(ATCOMSET.DOC) copied to \Windows directory. To view this document, you
need to have Microsoft Words v6.0c or above.
56K Connection
==============
This software has been specially customised to allow 56K connection
using æ-law modulation format used by most countries in the US and Asia
(e.g. Japan etc.). If you are unable to achieve 56K data connection
(depending on the line condition, in most cases, connection at speed
around 44K to 50K is more reasonable), please check up with your local
ISP for details.
In view of various countries communication standard, a utility
(SETCNTRY.EXE) for setting a and æ law is included in this version of
setup. This utility will be copied into \Windows directory and will
be executed immediately after modem installation for setting the modem
to the respective country. The various country supported are US, Japan,
Hong Kong, Singapore and Malaysia standards.
Note : As for Hong Kong having optional standards, if problems encountered
in 56K connection, simply run the SETCNTRY.EXE in \Windows directory and
select the other Hong Kong option.(HongKong (a) or HongKong (æ)).
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* EM3850-U Modem *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.