<=================================================================>
< HEWLETT PACKARD >
< EN1207D-TX 10/100 PCI FAST ETHERNET ADAPTER >
< WINDOWS 95(osr0/1) NDIS3 MINIPORT DRIVER INSTALLATION >
< >
< Copyright (C) 1998 HEWLETT PACKARD >
< All Rights Reserved. >
<=================================================================>
The driver (EN1207D.SYS) contained in the directory WIN95 is for
the following HP PCI Ethernet adapter:
HP EN1207D-TX PCI Fast Ethernet Adapter
The driver (EN1207D.SYS) conforms to the Network Driver Interface
Specification (NDIS) 3.0, and used with Microsoft Windows 95 OSR0/1
Contents:
---------
(0) Configuring EN1207D-TX PCI Adapter Media Mode
(A) Installing NDIS3 Miniport driver on Microsoft Windows 95 OSR0/1
(B) Configuring NDIS3 Miniport driver on Microsoft Windows 95 (OSR0/1)
(0) Configuring EN1207D-TX PCI Adapter Media Mode
===============================================
Before Installing your NDIS3 Driver, EN1207D-TX adapter can be set
in Full/Half Duplex mode.(Please reference readme File)
(A) Installing NDIS3 Miniport driver on Microsoft Windows 95 OSR0/1
=================================================================
1. Plug HP's EN1207D-TX adapter into one of the Master PCI
slots of your PCI platform.
2. Turn power ON then boot from Windows 95.
3. Windows 95 will prompt "PCI Ethernet Controller" in
"New Hardware Found" dialog box and "Update Device Driver
Wizard" dialog box.
4. Insert the HP EN1207D-TX Driver Diskette in your floppy drive.
5. Select "Driver from disk provided by hardware manufacturer" from New
Hardware Found dialog box, then click OK button.
6. Enter the driver pathname, i.e. A:\win95sr1 (or B:\win95), then click the
OK button in the Install from Disk dialog box.
7. Follow screen instructions to complete the process.
8. Restart your computer.
(B) Configuring NDIS3 Miniport driver on Microsoft Windows 95 (OSR0/1)
====================================================================
1. Click the "My Computer" icon in the Main Program Group.
2. Click the "Control Panel" icon from My Computer window.
3. Click the "Network" icon from the Control Panel window.
4. Select "HP EN1207D-TX PCI Fast Ethernet Adapter" item
from "Network" dialog box, then click "Properties" button.
5. Click "Advanced" button from "HP EN1207D-TX PCI Fast
Ethernet Adapter Properties" dialog box.
6. Select the Line Speed value (AutoDetect, 10 Mbps, 100 Mbps)
from "Value" item, then click OK button from "HP EN1207D-TX
PCI Fast Ethernet Adapter Properties" dialog box.
7. Click OK button from "Network" dialog box.
8. Restart your computer to take effect the new configuration.
Trademarks:
Microsoft Windows 95 (OSR0/1) is a trademark of Microsoft Corporation.
===End of File===
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.