1. p5vx0819.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (p5vx0819.exe)

*************************************************************************
*              BIOS Ver. TVG0819D for MBD-P5VXB (8500 TVG)              *
*************************************************************************

Accompanied with this README.TXT file are the following files:

   -  FLASH601.EXE    BIOS Installation Utility
   -  TVG0819D.BIN    Updated BIOS file dated 8/19/97


IMPORTANT: The USB function in the "Advanced Chipset Setup" has to be disabled
           for this BIOS update procedure to work.

---------------------
BIOS Update Procedure
---------------------

1) Disable the USB function from the "Advanced Chipset Setup".

2) Go to the DOS prompt by using one of the following:

   (a) Boot up your system with a DOS system disk.
   (b) After you boot up your system, once you see the line "Starting MS-DOS..."
       press the <F5> key.
   (c) After you boot up your system, once you see the line
       "Starting Windows 95...", press the <SHIFT> and <F5> keys together.


3) Insert the diskette with the two files listed above into Drive A:

4) At A:> prompt type: FLASH601 

5) Press P to select flash ROM type.

6) For AMD CPU select "5" for MXIC 28F1000P.
    For others press <ENTER> to auto select.

7) DO NOT TURN OFF THE COMPUTER UNTIL THE UPDATE IS FINISHED!

8) When the update is complete, take out the diskette and reboot your computer
   by pressing any key.

9) Load Auto Configuration with Optimal Settings to make the change to
   take effect.



-------------
Release Notes
-------------

TVG0819D
========

1) Modify 6x86MX CPU PR ratio (50MHz x 2.5 and 66MHz x 2 ) for Cyrix
   specification change.

2) Add PCI IRQ routing table to HCT.

3) Fix incorrect CPU clock display at 125MHz for Pentium-133MHz.

4) Correct Cyrix CPU cache organization error after the CMOS data has been
   cleared.

5) Resolve HCT test item "Media/Port disable" failure.


TVG0618D
========

1) To display the correct CPU information for Pentium P54-200MHz CPU on the 
   BIOS screen.

2) To add support for Cyrix P200 CPU ( 75MHz bus Clock )  

3) To fix the wake up failure in SCT v5.40 APM1.2 test

4) To correctly detect the Cyrix 6x86MX initial code


TVG0521D
=========

Change default setting in Advanced Chipset Setup for 
"U.S.B. Function Enabled" from "Disabled" to "Enabled".

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.