PROTOCOL.INI Driver File Contents (dfe530tx.zip)

;------------------------------------------------------------------------------
; PROTOCOL.INI of D-Link DFE-530TX PCI Fast Ethernet Adapter
;------------------------------------------------------------------------------
; Description :
;       Drivername = DLKFET
;
; CONNECTIONTYPE = AUTOSENSE
;   AUTOSENSE             ;Auto-select media type and line speed
;   _10BASET              ;Force the driver to select 10Mbps half duplex mode.
;   _10BASETFD            ;Force the driver to select 10Mbps full duplex mode.
;   _100BASETX            ;Force the driver to select 100Mbps half duplex mode.
;   _100BASETXFD          ;Force the driver to select 100Mbps full duplex mode.
;
;
;   Keywords supported by DLKFET
;-------------------------------------------------------------------------------
;
;     AUTOSENSE       - This keyword performs power-up autosense on all
;                       types of boards in order to connect to the active
;                       line, and dynamic media autosensing (at run-time)
;                       on boards supporting it. Without specifying any
;                       keyword this one will be used as default one.
;
;     _10BASET         - This keyword force media type to be 10Mbps half
;                       duplex, and disable power-up autosense.
;
;     _10BASETFD       - This keyword force media type to be 10Mbps full
;                       duplex, and disable power-up autosense.
;
;     _100BASETX       - This keyword force media type to be 100Mbps half
;                       duplex, and disable power-up autosense.
;
;     _100BASETXFD     - This keyword force media type to be 100Mbps full
;                       duplex, and disable power-up autosense.
;
;       SLOT =  1
;          This parameter specifies the slot number used for notifications.
;          For PCI slot , you can specify from 1 to 16.
;
;
; FLOW_CONTROL= 1
;          0              ;Disable flow control function.
;          1              ;Enable flow control functione.
;
;
;------------------------------------------------------------------------------
        DriverName = DLKFET$

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.12