;
;--------------------------------------------------------------------------
; OEMSETUP File for HP PCI 10/100 Adapters
;--------------------------------------------------------------------------
;
[Identify]
set !G:DebugOutputControl = 1
Debug-Output "HPVGPCI: Identify."
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
J2585ASLOT
J2585BSLOT
J2973ASLOT
J2970ASLOT
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
DialogDllName = "hpvg1dlg.dll"
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Hewlett-Packard"
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Hpddnd3"
ProductSoftwareTitle = "HP DeskDirect 10/100 LAN Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\hpddnd3.sys"
NetRuleSoftwareType = "Hpddnd3Sys ndisDriver Hpddnd3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Hpddnd3Sys"" yes no container"
NetRuleSoftwareClass = {"Hpddnd3Driver basic"}
NetRuleSoftwareBindable = {"Hpddnd3Driver Hpddnd3Adapter non exclusive 100"}
ProductHardwareName = "Hpddnd3"
ProductHardwareJ2585AIOTitle = "HP J2585A"
ProductHardwareJ2585ASLOTTitle = "HP J2585A"
J2585ASLOTCFID = 4144
ProductHardwareJ2585BIOTitle = "HP J2585B"
ProductHardwareJ2585BSLOTTitle = "HP J2585B"
J2585BSLOTCFID = 4145
ProductHardwareJ2973AIOTitle = "HP J2973A"
ProductHardwareJ2973ASLOTTitle = "HP J2973A"
J2973ASLOTCFID = 4145
ProductHardwareJ2970AIOTitle = "HP J2970A"
ProductHardwareJ2970ASLOTTitle = "HP J2970A"
J2970ASLOTCFID = 4145
NetRuleHardwareType = "Hpddnd3 Hpddnd3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Hpddnd3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[SlaveFileConstants]
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Hpddnd3"
ProductSoftwareTitle = "HP DeskDirect 10/100 LAN Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\Hpddnd3.sys"
NetRuleSoftwareType = "Hpddnd3Sys ndisDriver Hpddnd3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Hpddnd3Sys"" yes no container"
NetRuleSoftwareClass = {"Hpddnd3Driver basic"}
NetRuleSoftwareBindable = {"Hpddnd3Driver Hpddnd3Adapter non exclusive 100"}
ProductHardwareName = "Hpddnd3"
NetRuleHardwareType = "Hpddnd3 Hpddnd3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Hpddnd3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[BusMFileConstants]
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Hpddnd3"
ProductSoftwareTitle = "HP DeskDirect 10/100 LAN Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\Hpddnd3.sys"
NetRuleSoftwareType = "Hpddnd3Sys ndisDriver Hpddnd3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Hpddnd3Sys"" yes no container"
NetRuleSoftwareClass = {"Hpddnd3Driver basic"}
NetRuleSoftwareBindable = {"Hpddnd3Driver Hpddnd3Adapter non exclusive 100"}
ProductHardwareName = "Hpddnd3"
NetRuleHardwareType = "Hpddnd3 Hpddnd3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Hpddnd3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[ReturnOptions]
set !G:DebugOutputControl = 1
Debug-Output "HPVGPCI: ReturnOptions."
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
Debug-Output "HPVGPCI: ReturnOptions successful."
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
;NEW
ifcontains(i) $(Option) in {J2585BSLOT,J2973ASLOT,J2970ASLOT}
read-syms BusMFileConstants
else
read-syms SlaveFileConstants
endif
;END NEW
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
;NEW
ifcontains(i) $(Option) in {J2585BSLOT,J2973ASLOT,J2970ASLOT}
read-syms BusMFileConstants$(!STF_LANGUAGE)
else
read-syms SlaveFileConstants$(!STF_LANGUAGE)
endif
;END NEW
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;
; Get the Version of Windows NT we are installing on. This will allow us to
; use the various capabilities of different NT versions (e.g. PCI Support that
; is included in NT 3.51)
;
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == 3.10 ; Fail install if NT 3.1
Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT 3.1 is not supported by this product"
goto fatal
endif
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the Hpddnd3 driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "HPVGPCI.INF $(Option): =================================================="
Debug-Output "HPVGPCI.INF $(Option): STF_CWDIR is: $(!STF_CWDIR)"
Debug-Output "HPVGPCI.INF $(Option): STF_SRCDIR is: $(!STF_SRCDIR)"
Debug-Output "HPVGPCI.INF $(Option): STF_LANGUAGE is: $(!STF_LANGUAGE)"
Debug-Output "HPVGPCI.INF $(Option): Option is: $(Option)"
Debug-Output "HPVGPCI.INF $(Option): !STF_NCDETECT is: $(!STF_NCDETECT)"
Debug-Output "HPVGPCI.INF $(Option): !STF_NCOPTION is: $(!STF_NCOPTION)"
Debug-Output "HPVGPCI.INF $(Option): !STF_NCDETCARD is: $(!STF_NCDETCARD)"
Debug-Output "HPVGPCI.INF $(Option): !STF_NCDETINFO is: $(!STF_NCDETINFO)"
; Primary Bus
Debug-Output "HPVGPCI.INF $(Option): !STF_BusType is $(!STF_BUSTYPE)"
; All Buses
Debug-Output "HPVGPCI.INF $(Option): !STF_BusTypeList is $(!STF_BUSTYPELIST)"
Debug-Output "HPVGPCI.INF $(Option): =================================================="
Set DetectedCard = FALSE
Goto $(StartLabel)
installadapter = +
Debug-Output "HPVGPCI.INF $(Option): Installadapter"
;
; Check for prior SW install
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
; $(ProductVersion)
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
goto end
else
; Shell $(UtilityInf), CardExistedDlg
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
; ifstr(i) $($R1) != "OK"
; goto end
; endif
set OldVersionExisted = $(TRUE)
endif
endif
;
; Install the DLL
;
Set CurrParamSettings = {}
set OldSource = $(!STF_SRCDIR)
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(!STF_SRCDIR)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_FAILED
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto installstep1
Endif
Set !STF_SRCDIR = $($R1)
; install "Install-Dll"
Set !STF_SRCDIR = $(OldSource)
;
;Set Defaults
;
set IOBaseAddrValue = *($(IOBaseAddrList), $($(Option)IOBaseAddrDefault))
Goto adaptersetup
configureadapter = +
Debug-Output "HPVGPCI.INF $(Option): Configureadapter"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "HPVGPCI.INF $(Option): Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "HPVGPCI.INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "HPVGPCI.INF: FindService Shell error: $($R0)"
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "HPVGPCI.INF: Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "SlotNumber"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "AdapterType"
set AdapterTypeIndex = $(ValueData)
; else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
; set MemoryMapIndex = $(ValueData)
endif
EndForListDo
;
; HW can be configured only if AdapterType is 3
;
Debug-Output "HPVGPCI.INF: AdapterType is $(AdapterTypeIndex)"
ifint $(AdapterTypeIndex) != 3
Debug-Output "Cannot configure the HP PCI adapter card."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
adaptersetup = +
Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
goto adapteroptions
adapteroptions = +
read-syms FileDependentDlg$(!STF_LANGUAGE)
Debug-Output "HPVGPCI: Assign AdapterType."
;AdapterType: 0=ISA, 1=EISA, 2=MCA, 3=PCI/IO, 4=PCI/Slot
set AdapterTypeValue = $($(Option)AdapterType)
Debug-Output "HPVGPCI: AdapterType is $(AdapterType)."
ifint $(AdapterTypeValue) == 3
;
; Manual installation
;
set NTDetected = $(FALSE)
Debug-Output "HPVGPCI $(Option): Manual Install."
Debug-Output "HPVGPCI: Start the dialog box."
LoadLibrary "Disk 1" $(DialogDllName) !hLib
SetHelpFile "hpvgp.hlp" $(MinID) $(MaxID)
ui start "InputDlg" $(!hLib)
FreeLibrary $(!hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
; set IRQValueIndex = $(Combo1Out)
; set IOBaseAddrIndex = $(Combo2Out)
set IOBaseAddrIndex = $(Combo1Out)
; set MemoryMapIndex = $(Combo3Out)
set AdapterList = $(Option) ;; 1 Item to install
ui pop 1
goto nextstep
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
set BusNumber = 0
else
;
; Plug 'n Play installation
;
Debug-Output "HPVGPCI $(Option): 3.50 Plug and Play Install."
set NTDetected = $(FALSE)
ifstr(i) *($(CurrentVersionValue),4) == 3.50 ;; We need to ask on v3.50
Debug-Output "HPVGPCI.INF $(Option): Running 3.50 Bus Dialog"
set BusInterfaceType = 5
set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
set BusNumber = 0
set NTDetected = $(FALSE)
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; set BusInterfaceType = $($R1)
; Leave BusType hardcoded at 5.
; set BusTypeNum = $($R1)
set BusNumber = $($R2)
set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
set AdapterList = $(Option) ;; 1 Item to install
Debug-Output "HPVGPCI.INF $(Option): BusInterfaceType = $(BusInterfaceType)"
Debug-Output "HPVGPCI.INF $(Option): BusNumber = $(BusNumber)"
else
Debug-Output "HPVGPCI $(Option): 3.50 Plug and Play Install."
Debug-Output "HPVGPCI.INF $(Option): Running 3.51 PCI Dectection"
;;
;; v3.51 has PCI detection code built in.
;;
set NTDetected = $(TRUE)
set Vendor = 4156 ;; 0x103c is HP's Vendor ID!
set-div CFID = $($(Option)CFID) 1
Debug-Output "HPVGPCI.INF $(Option): VendorID = $(Vendor)"
Debug-Output "HPVGPCI.INF $(Option): CFID = $(CFID)"
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
set AdapterList = $($R0)
endif
endif
nextstep = +
Shell "" DebugConfiguration "after running dialog"
Set from = adapteroptions
Set to = skipoptions
goto skipoptions
skipoptions =+
; ifint $(OldVersionExisted) == $(TRUE)
; ifstr(i) $(!NTN_InstallMode) == configure
; goto writeparameters
; endif
; endif
StartWait
;
; If this is a new install then copy the driver files.
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
;
; Add Software Component
;
Debug-Output "HPVGPCI $(Option): Add Software Component."
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3) ; SoftServiceKey
CloseRegKey $($R4) ; SoftParameterKey
CloseRegKey $($R5) ; SoftLinkageKey
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
Debug-Output "HPVGPCI $(Option): Add Product Software Values."
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
;
; Add Net Rule Values
;
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "HPVGPCI: Add Net Rule Values."
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
goto fatalregistry
endif
endif
;
; Process the Adapter List
;
Debug-Output "HPVGPCI.INF $(Option): Adapterlist = $(AdapterList)"
ForListDo $(AdapterList)
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
Set InstallCard = "YES"
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
Debug-Output "HPVGPCI.INF $(Option): DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "HPVGPCI.INF $(Option): DetectedSlotNum = $(DetectedSlotNum)"
; This check will cover the J2585A
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't want to re-install, it's there already
endif
;
; NEW - Don't over-install onto any Lassen based adapter
;
; Check for J2585B
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardwareJ2585BSLOTDescription), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't re-install, it's there already
endif
; Check for J2973A
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardwareJ2973ASLOTDescription), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't re-install, it's there already
endif
; Check for J2970A
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardwareJ2970ASLOTDescription), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't re-install, it's there already
endif
;
; END NEW
;
endif
ifstr(i) $(InstallCard) == "NO"
Debug-Output "HPVGPCI.INF $(Option): Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!"
; set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!"
set Error = "An adapter at Bus $(DetectedBusNum), Slot $(DetectedSlotNum) is already installed!"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto nextadapter
; else
endif
;
; AddHardwareComponent
;
;; NEW NEW
Debug-Output "HPVGPCI: Add Hardware Component."
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "HPVGPCI: Add Product Hardware Values."
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
;
; Add HW Configuration Parameters
;
Debug-Output "HPVGPCI $(Option): Assign AdapterType."
;AdapterType: 0=ISA, 1=EISA, 2=MCA, 3=PCI/IO, 4=PCI/Slot
set AdapterTypeValue = $($(Option)AdapterType)
ifint $(AdapterTypeValue) == 3
Ifstr(i) $(CurrentVersionValue) == ""
Debug-Output "HPVGPCI.INF $(Option): Set BusNumber = 0 "
Set BusNumber = 0
Else
Ifstr(i) $(CurVer) == "3.1"
Debug-Output "HPVGPCI.INF $(Option): 3.10 Set BusNumber = 0 "
Set BusNumber = 0
Shell $(UtilityInf), GetBusTypeNum
set TempBusTypeNum = $($R1)
set BusTypeNum = $(TempBusTypeNum)
else
ifstr(i) $(!NTN_InstallMode) != configure
Debug-Output "HPVGPCI.INF: Shell out for BusNumber"
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusTypeNum) $(BusNumber)
Set BusNumber = $($R2)
; Set BusTypeNum = $($R1)
Set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
else
Debug-Output "HPVGPCI.INF $(Option): Configuring, don't shell out for BusNumber"
endif
endif
Endif
Debug-Output "HPVGPCI $(Option): Assign IOBaseAddress."
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
Debug-Output "HPVGPCI $(Option): Form the Adapter Parameter List."
Debug-Output "HPVGPCI $(Option): IOBaseAddress string is: $($(Option)BaseAddress)"
Debug-Output "HPVGPCI $(Option): IOBaseAddress = $(IOBaseAddressValue)"
Debug-Output "HPVGPCI $(Option): BusNumber = $(BusNumber)"
Set NewValueList = { +
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
Debug-Output "HPVGPCI: Add Adapter IoBaseAddress Parameter."
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
; CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
else
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
; set BusInterfaceType = $(BusTypeNum)
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}+
}
Debug-Output "HPVGPCI.INF $(Option): Set HardwareParameterKey = $(NewValueList)"
Debug-Output "HPVGPCI $(Option): SlotNumber = $(SlotNumber)"
Debug-Output "HPVGPCI $(Option): BusNumber = $(BusNumber)"
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
}
Debug-Output "HPVGPCI.INF $(Option): Set HardwareParameterKey = $(NewValueList)"
Debug-Output "HPVGPCI $(Option): BusNumber = $(BusNumber)"
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
endif
set BusTypeNum = 5
Debug-Output "HPVGPCI $(Option): Assign BusType = $(BusTypeNum)"
Set NewValueList = { +
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "HPVGPCI $(Option): BusType = $(BusType)"
Debug-Output "HPVGPCI $(Option): AdapterType = $(AdapterType)"
Debug-Output "HPVGPCI $(Option): MediaType = $(MediaType)"
Debug-Output "HPVGPCI $(Option): Add Adapter Configuration Parameters."
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
; endif
nextadapter = +
EndForListDo
EndWait
goto successful
;; END NEW
;; OLD
Debug-Output "HPVGPCI: Add Hardware Component."
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "HPVGPCI: Add Product Hardware Values."
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set TempBusTypeNum = $($R1)
; PCI Bus Type
set BusTypeNum = 5
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
Debug-Output "HPVGPCI: Assign AdapterType."
;AdapterType: 0=ISA, 1=EISA, 2=MCA, 3=PCI/IO, 4=PCI/Slot
set AdapterTypeValue = $($(Option)AdapterType)
;Get BusNumber
set BusNumber = 0
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Microsoft\Windows Nt\CurrentVersion" $(MAXIMUM_ALLOWED) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurVerValue
Set CurVer = *($(CurVerValue),4)
Debug-Output "HPVGPCI.INF: NT Version is "$(CurVer)
CloseRegKey $(KeyNt)
Endif
Ifstr(i) $(CurVer) == ""
Debug-Output "HPVGPCI.INF: Set BusNumber = 0 "
Set BusNumber = 0
Else
Ifstr(i) $(CurVer) == "3.1"
Debug-Output "HPVGPCI.INF: Set BusNumber = 0 "
Set BusNumber = 0
set BusTypeNum = $(TempBusTypeNum)
; set AdapterTypeValue = 0
else
; Debug-Output "HPVGPCI.INF: Shell out for BusNumber"
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusTypeNum) $(BusNumber)
Set BusNumber = $($R2)
endif
Endif
Debug-Output "HPVGPCI: Assign IOBaseAddress."
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
Debug-Output "HPVGPCI: Form the Adapter Parameter List."
Debug-Output "HPVGPCI: IOBaseAddress string is: "$($(Option)BaseAddress)
; Set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
Set NewValueList = { +
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
; {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryMapValue)},+
{$($(Option)BaseAddress),$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
; {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
Debug-Output "HPVGPCI: Add Adapter Configuration Parameters."
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;; END OLD
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
;; NEW
Debug-Output "HPVGPCI.INF $(Option): UpdateSoftware"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
;; END NEW
;; OLD
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
;; END OLD
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "HPVGPCI.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: $($0)"
; Debug-Output $(InfName)" IRQLevel is $(!p:IRQValue)"
Debug-Output $(InfName)" IOBaseAddrValue is $(!p:IOBaseAddrValue)"
Debug-Output $(InfName)" IOBaseAddrValue is $(IOBaseAddrValue)"
; Debug-Output $(InfName)" MemoryMappedBaseAddr is $(!p:MemoryMapValue)"
Debug-Output $(InfName)" AdapterType is $(AdapterType)"
Debug-Output $(InfName)" BusType is $(BusType)"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
; AddSectionFilesToCopyList Files-Dll $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "HP Driver Support Disk" , TAGFILE = disk1
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=30722, RENAME=$(!UG_Filename)
[Files-J2585A]
1, Hpddnd3.sys , SIZE=52736
[Files-J2585ASLOT]
1, Hpddnd3.sys , SIZE=52736
[Files-J2585BSLOT]
1, Hpddnd3.sys , SIZE=52736
[Files-J2973ASLOT]
1, Hpddnd3.sys , SIZE=52736
[Files-J2970ASLOT]
1, Hpddnd3.sys , SIZE=52736
[Files-Dll]
1, Hpvg1dlg.dll, SIZE=16896
1, Hpvgp.hlp, SIZE=4536
[LanguagesSupported]
ENG
[OptionsTextENG]
J2585ASLOT = "HP DeskDirect (J2585A) 10/100 PCI LAN Adapter"
J2585BSLOT = "HP DeskDirect (J2585B) 10/100 PCI LAN Adapter"
J2973ASLOT = "HP DeskDirect (J2973A) 10BaseT PCI LAN Adapter"
J2970ASLOT = "HP DeskDirect (J2970A) 10BaseT/2 PCI LAN Adapter"
[BusMFileConstantsENG]
ProductSoftwareDescription = "HP DeskDirect 10/100 LAN Adapter Driver"
[SlaveFileConstantsENG]
ProductSoftwareDescription = "HP DeskDirect 10/100 LAN Adapter Driver"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
J2585AIOFunctionTitle = "HP DeskDirect (J2585A) PCI LAN Adapter Setup"
J2585BIOFunctionTitle = "HP DeskDirect (J2585B) PCI LAN Adapter Setup"
J2973AIOFunctionTitle = "HP DeskDirect (J2973A) PCI LAN Adapter Setup"
J2970AIOFunctionTitle = "HP DeskDirect (J2970A) PCI LAN Adapter Setup"
ProductSoftwareDescription = "HP DeskDirect 10/100 LAN Adapter Driver"
ProductHardwareJ2585AIODescription = "HP DeskDirect (J2585A) 10/100 PCI LAN Adapter"
ProductHardwareJ2585ASLOTDescription = "HP DeskDirect (J2585A) 10/100 PCI LAN Adapter"
ProductHardwareJ2585BIODescription = "HP DeskDirect (J2585B) 10/100 PCI LAN Adapter"
ProductHardwareJ2585BSLOTDescription = "HP DeskDirect (J2585B) 10/100 PCI LAN Adapter"
ProductHardwareJ2973AIODescription = "HP DeskDirect (J2973A) 10BaseT PCI LAN Adapter"
ProductHardwareJ2973ASLOTDescription = "HP DeskDirect (J2973A) 10BaseT PCI LAN Adapter"
ProductHardwareJ2970AIODescription = "HP DeskDirect (J2970A) 10BaseT/2 PCI LAN Adapter"
ProductHardwareJ2970ASLOTDescription = "HP DeskDirect (J2970A) 10BaseT/2 PCI LAN Adapter"
FunctionTitle = $($(Option)FunctionTitle)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
J2585ASLOTAdapterType = 4
J2585AIOAdapterType = 3
J2585BSLOTAdapterType = 4
J2585BIOAdapterType = 3
J2973ASLOTAdapterType = 4
J2973AIOAdapterType = 3
J2970ASLOTAdapterType = 4
J2970AIOAdapterType = 3
J2585AIOCombo1Label = "Base I/&O Address:"
AdapterTypeValue = $($(Option)AdapterType)
J2585AIOBaseAddress = "IoBaseAddress"
J2585AIOIOBaseAddrDefault = 9
[DialogConstantsENG]
Help = "Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "HPVG"
Caption = $(FunctionTitle)
DlgText = "Please select values for the following fields:"
Combo1Label = $($(Option)Combo1Label)
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
;Help Stuff
MinID = 1
MaxID = 6000
HelpContext = 5100
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.