AmeCfg.ini Driver File Contents (telia.zip)

[AccessConcentrators]
(Topcom ADSL)

[OPTIONAL_PROPERTIES]
IpHeaderCompression=No
DSLTestTool = No

[Driver Section]
ModemType=USB
RFC1483=yes
PPPoA=no
RFC1483_Bridged=yes
RFC1483_Routed=no
PPPoE=no
DyingGaspNotification = no

[ISP 1]
ISP Name=Topcom ADSL
Vpi=8
Vci=35
Framing=LLC
Status=Active

[ISP 2]
ISP Name=Wip Tech
Vpi=8
Vci=35
Framing=LLC
Status=Inactive

[INSTALL SCREENS]
WelcomeWindow=Off
LicenseWindow=off
ReadmeWindow=On
SelectRFC1483OrPPPoAWindow=Off
EnterVpiVciValues=off
FramingWindow=Off
SelectBridgedOrRoutedWindow=off
IpConfigWindow = off
FinishWindow=off

[IP]
IPAddress = 11.12.13.14
IPMask = 21.22.23.0
IPGateway = 255.255.255.255
PrimDNS = 111.112.113.114
SecDNS = 211.212.213.214
HostName = MyHost
IPGatewayInc = 2
DHCP = yes

[LED FUNCTIONALITY]
NoOfModemStates=9
NoOfLeds=4
NoOfConfigParameters=4

[Modem State 0]
 Active=On
 State Description = Power Off
 LED0 = Blink, 500, SW, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 1]
 Active=On
 State Description = Downloading Firmware
 LED0 = NULL, NULL, NULL, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 2]
 Active=On
 State Description = Idle(Closed)
 LED0 = NULL, NULL, NULL, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = Blink, 500, SW, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 3]
 Active=On 
 State Description = Initializing(State 0x08)
 LED0 = NULL, NULL, NULL, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = Blink, 500, SW, NULL

[Modem State 4]
 Active=on
 State Description = Initializing( 0x10)
 LED0 = Blink, 500, SW, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 5]
 Active=On
 State Description = Showtime-No Rx Data Passing/No Tx Data Passing
 LED0 = Blink, 500, SW, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = Blink, 500, SW, NULL
 LED3 = Blink, 500, SW, NULL


[Modem State 6]
 Active=Off
 State Description = Showtime- No Rx Data Transferred/No Tx Data Passing
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL

[Modem State 7]
 Active=Off
 State Description = Showtime- Rx Data Passing/No Tx Data Passing
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL


[Modem State 8]
 Active=Off
 State Description = Signal_Lost
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL











Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.23