Introduction:
=============
This document describes the procedure to install Windows NT4.0 driver
for 16-bit 100/10M PCMCIA Adapter.
Location of Driver: A:\ ( or A:\winnt40 )
It is not necessary to install enabler software (either a Card Enabler or
Card and Socket Services ) when installing a 100/10M PCMCIA Ethernet Card
under Windows NT 4.0.This driver will directly configure the PCMCIA Eth-
ernet Card for the Intel 82365SL and other PCMCIA controllers compatible
with it.
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT4.0
1. In the Main group of NT, select the [Control Panel] icon.
2. In the Control Panel window, choose the [Network] icon.
3. In the Network Settings dialog box, choose the [Adapter] button.
And then choose [Add] button .The Add Network Adapter dialog box
appears.
4. When asked for the name of the network card, select
[Have Disk] button.
5. Insert this driver diskette into drive A,and type the path of NT4.0
driver --> A:\
6. Select the [16-bit 100/10M Fast Ethernet PCMCIA Adapter] then press
<Enter>.
7. You need to specify the IRQ No.,I/O port address,Memory Location and
Socket number.
8. NT will then perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
9. Restarting your system you will acquire network service.
------------------------------- End of File --------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.