1. FastPCMCIA.zip Driver
2. WFW311.TXT File Contents

WFW311.TXT Driver File Contents (FastPCMCIA.zip)

Installing 16-bit 100/10M PCMCIA Adapter for MS Windows for Workgroups
=======================================================================


Installation Procedures

This  driver  diskette  includes  an  OEMSETUP.INF  file for Windows for
Workgroups. Using  the OEMSETUP.INF file , the user can  select  whichever
100/10M PCMCIA Adapters are to be installed based on Windows dialog menus.

The OEMSETUP.INF file contains selections for 100/10M PCMCIA adapter.

1. Proceed  to install  Windows  for  Workgroups.  If you already  have an
   installed  Windows  for  Workgroups , open  the Control Panel Window to
   change the network settings.

2. When Windows asks for the type of network adapter , it will show a list
   of   all  network  adapters  supported  by  Windows.  You  must  select
   [ Unlisted or Updated Network Adapter ].

3. Windows will ask for an  OEMSETUP.INF file. Since the OEMSETUP.INF file
   is included in the driver disk, insert the diskette in drive A:

   Input the full path where the OEMSETUP.INF file is located.
   ( i.e. A:\WFW311 )

4. You will see a Windows dialog menu listing all network adapters included
   in the OEMSETUP.INF file.  Select the network adapter that you will be
   using.

5. Select [16-bit 100/10M Fast Ethernet PCMCIA Adapter] and press <Enter>.

6. You  need to  specify IRQ and I/O settings, which must be  equal to the
   /irq and /iop parameters specified to the Card Enabler program.

7. Windows will copy  the NDIS  driver file and update the Windows network
   system  automatically.

   At this point , you can finish the installation or continue the process
   according to your preferences.

After WFW finishes the setup for the driver, it will modify your CONFIG.SYS,
AUTOEXEC.BAT, and PROTOCOL.INI files.

------------------------------ End of File -------------------------------