PCI Fast Ethernet Card User's Guide
FE100R II/III Driver Disk Version 1.1
Overview:
The Fast Ethernet Adapter Series are 32-bit PCI Local
Bus based network boards featuring a high data transmission
rate of 100Mbps on a 100BaseTX network. It conforms to the
IEEE802.3 10BaseT and 802.3u 100BaseTX standards.
The 10/100Mbps card is a dual-speed adapter with a single
auto-negotiation 10/100Mbps RJ-45 connector. Either UTP
or STP can be used for connection to a 10BaseT or 100BaseTX
network. The speed is determined by the kind of hub, the card
is connected to.
Full-duplex operation is supported. When the card is running
with the full-duplex mode, the speed can be boosted to 20Mbps/
200Mbps.
A ROM socket is provided on the board for a bootROM. With
the optional RPL(Remote Program Load) BootROM, a diskless
station can bootup from the different network systems, such
as Novell NetWare, Linux, Microsoft LAN Manager, IBM LAN Server,
Banyan VINES, and Artisoft LANtastic.
The Fast Ethernet Card series not onlu provide a good solution
for you to upgrade to 100BaseTX networking, but also protect your
investment on 10BaseT.
Features:
.Uses single chip controller which is compliant to the PCI Local Bus specification.
.STP/UTP category 3,4 or 5(100BaseTX) wiring.
.Support ODI/NDIS/Packet/UNIX drivers.
.Supprots 32-bit data path width.
.PCI Bus Master,High performance.
.Support half-duplex and full-duplex, network speed up to 20Mbps or 200Mbps.
.FCC and CE certified.
Specifications:
Access Method :CSMA/CD
Data Rate :10/20Mbps(full-duplex)
100/200Mbps(full-duplex)
Network Interface :IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
Cable :10BaseT:Category 3,4,5 STP/UTP cable.
100BaseTX:Category 5 STP/UTP cable.
Transmit/Reveive
Buffer Memory :2KB transmit FIFO
4KB receive FIFO
Power Input :+5Volts at 1 Amp. Maximum.
Temperature :Operating: 0¢J ~ 45¢J
Storage: -40¢J ~ 70¢J
Humidity :50% ~ 90% Relative Humidity.
LED :
FE100RIIIF :3-LED
100-LED (When Green, the Connection Speed is 100Mbps)
ACT-LED (When Yellow Blink, Packet transmission is being processed)
LNK-LED (When Green, It's on line.)
FE100R3BF :3-LED (When Green, the Connection Speed is 100Mbps)
100-LED (When Green, the Connection Speed is 100Mbps)
ACT-LED (When Yellow Blink, Packet transmission is being processed)
LNK-LED (When Green, It's on line.)
FE100R3S :1-LED (When Green, the Connection Speed is 100Mbps)
100R3SB1 :2-LED
100-LED (When Green, the Connection Speed is 100Mbps)
ACT-LED (When Green Blink, Packet transmission is being processed)
Diskette Contents:
--------------------------------------------------------------------
Files and Dirs Description
--------------------------------------------------------------------
RSET8139.EXE RSET8139 program set up the adapter's hardware
configuration and running diagnostics;
\CLIENT32 Subdirectory for Netware Client 32 driver;
\INFO This subdirectory includes all text files for
instruction to install various drivers;
\NDIS Subdirectory for OS/2 LAN server & DOS LAN
requester driver;
\DOS Subdirectory for IBM DOS LAN requester driver;
\OS2 Subdirectory for IBM OS/2 LAN server driver;
\NDIS3 Subdirectory for Microsoft Windows 95, OSR2,
Windows NT 3.51 and Windows NT 4.0 NDIS 3.1
mini-port requester driver;
\NWCLIENT Subdirectory for Novell NetWare DOS ODI
driver;
\NWSERVER Subdirectory for Novell NetWare Drivers;
\312 Subdirectory for Novell NetWare ODI Ver 3.12
server driver;
\40 Subdirectory for Novell NetWare ODI Ver 4.00
server driver;
\41X Subdirectory for Novell NetWare ODI Ver 4.1x
server driver;
\500 Subdirectory for Novell NetWare ODI Ver 5.00
server driver;
\PKTDRV Subdirectory for FTP spec-compliant packet driver
and Sun Microsystems PC/NFS Driver;
\SCO Subdirectory for SCO UNIX LLI/MDI Drivers;
\4.X Subdirectory for SCO UNIX 4.X drivers;
\5.X Subdirectory for SCO UNIX 5.X drivers;
\WFW311 Subdirectory containing Windows for WorkGroup 3.11
driver files;
\WIN95 Subdirectory containing Win95 & OSR2 NDIS 3.1
mini-port driver files;
\WIN98 Subdirectory containing OSR2 & Win98 NDIS 4.0
mini-port driver files;
\WINNT Subdirectory containing Windows NT4.0 NDIS 4.0
mini-port driver files;
\UW7 Subdirectory for SCO UnixWare 7.x.
\WINDIAG
\Win9x Subdirectory containing Windows 9x Diag.
\Winnt4 Subdirectory containing Windows NT Diag.
\LINUX distributed with Linux after kernel version 2.0.34.
README.TXT This File.
NOTE :
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.