Workstation for DOS ODI Client
Introduction:
-------------
This document describes the procedure to setup the NetWare v3.X , v4.X
workstation driver for the PCMCIA Ethernet adapter.
You must run Socket/Card services device driver and/or Enable program
before you invoke any Ethernet driver. For the detailed information on
how to insatll PCMCIA driver, please refer to the User's Manual or the
"About PCMCIA" section in README file.
Location of Driver: \NETWARE\DOSODI\PCODI.COM
Sample Configuration Files:
---------------------------
STARTNET.BAT:
PCCARDGO
LSL
PCODI
IPXODI
NETX or VLM (VLM's for NetWare 4.X )
NET.CFG
LINK DRIVER PCODI
PORT 300
INT 5
FRAME ETHERNET_802.3
Auto-Installation Procedures for NetWare Client :
-----------------------------------------------
Before you start the installation process, make sure that the
adapter is properly installed and configured. Make sure that
your NetWare workstation operating system is properly installed.
1. Run INSTODI.BAT from the driver which has this installation
diskette.
2. Select the ODI environment(VLM or NETX).
3. The installation program will copy all required files to C:\NWNET
directory and create NET.CFG and STARTNET.BAT files.
4. The installation program will modify CONFIG.SYS file to add
"LASTDRIVE=drive" statement upon your confirmation and modify
NET.CFG and STARTNET.BAT files under C:\NWNET directory to meet
your ODI environment.
5. Reboot your system for the configuration to take effect if you
select VLM environment in step 2.
6. Change directory to C:\NWNET then run STARTNET.BAT, you will
connect to the file server.
Setup Procedures for NetWare 3.11/3.12 Client :
-----------------------------------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure that
your NetWare workstation operating system is properly installed.
1. Copy PCODI.COM from the PCMCIA Ethernet Driver Diskette
subdirectory A:\NETWARE\DOSODI to your harddisk.
2. Create a batch file, or add to your STARTNET.BAT file the commands
listed above under STARTNET.BAT.
3. Edit the NET.CFG file that you copied over according to your
requirements (see examples above). If there are two frame types
listed, whichever frame type is listed first, that is the one that
the driver will load. See above for examples. The NET.CFG file
should be in the same directory with LSL.COM file.
Setup Procedures for NetWare 4.X Client with vlm:
-----------------------------------------------
The installation utility INSTALL.EXE is located on NetWare's
"Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
for DOS Disk.
The NetWare Client Install program screen will appear. You must
complete each of the questions. These options are specific to your
needs.
1. Enter the destination directory for the NetWare Client.
(The default directory is C:\NWCLIENT.)
2. Gives you the option to automatically update the CONFIG.SYS
and the AUTOEXEC.BAT files or modify them at a later time
manually.
3. Do you wish to install support for MS Windows ? (Y/N)
(MS Windows Subdirectory: default C:\WINDOWS)
4. Asks you to select a network driver and provide configuration
options. It uses the specifications you select to create the
file NET.CFG. Insert the this drivers disk when prompted for
the driver disk and specify the driver path A:\NETWARE\DOSODI
5. Press <Enter> to install
NOTE:
-----
1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
network mappings to work properly.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.