OEMSETUP.INF Driver File Contents (dec_nic1.zip)

; OEMSETUP FILE FOR 10/100 Base-TX PCI Bus Ethernet Adapters
;     WNT version 3.51 - v2.44
;
; The information in this software is subject to change without  notice.
;
;----------------------------------------------------------------------------------------
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
    PCI
[Options]
    DC21140
[ConnectionChoicesDC21140]
    Connect_0 = "AutoSense", 0
    Connect_1 = "100BaseTx", 8
    Connect_2 = "100BaseTx Full_Duplex", 9
    Connect_5 = "10BaseT", 2
    Connect_6 = "10BaseT Full_Duplex", 3
[FileConstants]
UtilityInf	= "UTILITY.INF"
subroutineinf	= "SUBROUTN.INF"
SoftwareType	= "driver"
Exit_Code	= 0
NetEventDLL	= "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL	= "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer	= "DigitalEquipmentCorporation"
ProductMajorVersion	= "2"
ProductMinorVersion	= "44"
ProductVersion	= $(ProductMajorVersion)"."$(ProductMinorVersion)

VendorID = 4113  ;; 1011 (DEC)


ProductSoftwareName	= "DC21X4"
ProductSoftwareTitle    = "10/100 Base-TX PCI Bus Ethernet Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DC21X4.sys"
NetRuleSoftwareType	= "DC21X4Sys ndisDriver DC21X4Driver"
NetRuleSoftwareUse	= $(SoftwareType)
NetRuleSoftwareBindForm = """DC21X4Sys"" yes no container"
NetRuleSoftwareClass	= {"DC21X4Driver basic"}
NetRuleSoftwareSWBindable = {"DC21X4Driver DC21040Adapter non exclusive 100",+
			     "DC21X4Driver DC21041Adapter non exclusive 100",+
			     "DC21X4Driver DC21140Adapter non exclusive 100",+
			     "DC21X4Driver EB40Adapter non exclusive 100",+
			     "DC21X4Driver EB41Adapter non exclusive 100",+
			     "DC21X4Driver EB140Adapter non exclusive 100",+
			     "DC21X4Driver MULTIAAdapter non exclusive 100",+
			     "DC21X4Driver DE434Adapter non exclusive 100",+
			     "DC21X4Driver DE435Adapter non exclusive 100",+
			     "DC21X4Driver DE500Adapter non exclusive 100",+
			     "DC21X4Driver DE425Adapter non exclusive 100"}

OptionHelpFile = "DC21X4.hlp"
ProductHardwareName = "DC21X4"

ProductHardwareDC21140Title = "10/100 Base-TX PCI Bus Ethernet Adapter"
NetRuleHardwareDC21140Type  = "DC21140 DC21140Adapter"
NetRuleHardwareDC21140Class = {"DC21140Adapter basic"}
AdapterDC21140Type = 5	 ;; PCI board
HelpDC21140Id = 30
DC21140CFID = 593937	 ;; 0x00091011

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName	= $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName	= $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from	  = ""
to	  = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull 	= ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct	= ""
KeyParameters	= ""
TRUE		= 1
FALSE		= 0
NoTitle 	   = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath	= $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status	   = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media	   = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status	      = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status	       = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option	 = $($1)
    set SrcDir	 = $($2)
    set AddCopy  = $($3)
    set DoCopy	 = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	  Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	       Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		     goto ShellCodeError
	       endif
	       set Error = $($R0)
	       set from = end
	       set to = end
	       goto nonfatalinfo
	  else-ifstr(i) $(Option) == "DE425"
	       Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		     goto ShellCodeError
	       endif
	       set Error = $($R0)
	       set from = end
	       set to = end
	       goto nonfatalinfo
	  else
	       set StartLabel = configureadapter
	  endif
   else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	      goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	    endif
	    set Error = $($R0)
	       Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	Endif
	Set SrcDir = $($R1)
	install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	   Goto fatalregistry
	Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "ConnectionType"
	    set ConnectionIndex = $(ValueData)
	endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
	set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
    ifstr(i) $(Option) != "DE425"
	set from = adapteroptions
	read-syms FileDependentDlg$(!STF_LANGUAGE)
	SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
	ui start "InputDlg"
	ifstr(i) $(DLGEVENT) == "CONTINUE"
	   set ConnectionIndex = $(Combo1Out)
	   ui pop 1
	else-ifstr(i) $(DLGEVENT) == "BACK"
	   set CommonStatus = STATUS_USERCANCEL
	   ui pop 1
	   goto end
	else
	   ui pop 1
	   goto end
	endif
	set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
	ifstr(i) $(!NTN_InstallMode) == configure
	   goto updateparameters
	endif
    endif
installproduct =+
    StartWait
    ifstr(i) $(Option) == "DE425"
	Shell $(UtilityInf), EISAFindBus, $($(Option)_1BYTE),$(EISA_MASK)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	     goto ShellCodeError
	endif
	ifstr $($R0) != "NO_ERROR"
	     set Error = $($R0)
	     goto fatal
	endif
	ifstr(i) $($R1) == {}
	     set Error = $(CANNOT_FIND_ANY_CARD)
	     set CommonStatus = USER_CANCEL
	     set from = end
	     goto nonfatal
	endif
	set AdapterList = $($R1)
    else
	set-div DeviceID = $($(Option)CFID) 65336
	Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	     goto ShellCodeError
	endif
	ifstr(i) $($R0) == {}
	     set Error = $(CANNOT_FIND_ANY_CARD)
	     set CommonStatus = USER_CANCEL
	     set from = end
	     goto nonfatal
	endif
	set AdapterList = $($R0)
    endif
    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Goto ShellCodeError
	   Else-Ifstr(i) $($R0) == STATUS_FAILED
	       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	       endif
	       set Error = $($R0)
	       Goto fatal
	   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	   Endif
	   Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   set Error = $($R0)
	   goto fatal
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey	= $($R1)
	Set SoftNetRuleKey	= $($R2)
	Set SoftServiceKey	= $($R3)
	Set SoftParameterKey	= $($R4)
	Set SoftLinkageKey	= $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
	set BusNum = *($($),1)
	set DeviceNum = *($($),2)
	set FunctionNum = *($($),3)
		Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
		    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		ifstr $($R0) != "NO_ERROR"
		    set Error = $($R0)
		    goto fatal
		endif
		ifstr(i) $($R1) != "YES"
		    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
		    ifint $($R4) != -1
			Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
		    endif
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set RegistryErrorIndex = $($R0)
		    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			 EndWait
			 CloseRegKey $($R1)
			 CloseRegKey $($R2)
			 CloseRegKey $($R3)
			 goto fatalregistry
		    endif
		    read-syms FileDependentDlg$(!STF_LANGUAGE)
		    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
		    ui start "InputDlg"
		    ifstr(i) $(DLGEVENT) == "CONTINUE"
			 set ConnectionIndex = $(Combo1Out)
			 ui pop 1
		    else-ifstr(i) $(DLGEVENT) == "BACK"
			 set CommonStatus = STATUS_USERCANCEL
			 ui pop 1
			 goto end
		    else
			 ui pop 1
			 goto end
		    endif
		    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
		    Set HardNetCardKey	    = $($R1)
		    Set HardNetRuleKey	    = $($R2)
		    Set HardParameterKey    = $($R3)
		    set AdapterNumber = $($R4)
		    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
					{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
					{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
					{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
					{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
					{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
		    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			 goto ShellCodeError
		    endif
		    set BusTypeNum = 5
		    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
					{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
					{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
					{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    ifint $($(Option)CFID) == $(DC21041CFID)
			set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
			Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			    goto ShellCodeError
			endif
		    endif
		    ifint $($(Option)CFID) == $(DC21140CFID)
			set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),1},+
					    {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),512}}
			Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			    goto ShellCodeError
			endif
		    endif
		    ifstr(i) $(Option) == "MULTIA"
			set NewValueList = {{ExternalSia,$(NoTitle),$(!REG_VT_DWORD),1},+
					    {SiaRegister0,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister0)},+
					    {SiaRegister1,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister1)},+
					    {SiaRegister2,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister2)}}
			Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			    goto ShellCodeError
			endif
		    endif
		    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
		    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
		    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
					{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
					{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
					{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    CloseRegKey $(HardNetCardKey)
		    CloseRegKey $(HardNetRuleKey)
		    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
					{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
					{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    CloseRegKey $(HardParameterKey)
		endif
	endif
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
	   Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error"
	       goto ShellCodeError
	   endif
	   set !UG_Filename = $($R0)
	   install "Install-Update"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	       goto fatal
	   endif
	   SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	   SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	   CloseRegKey $(KeyProduct)
     else
	   goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL	= ""
   set STF_OVERWRITE	= "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "10/100 Base-TX PCI Bus Ethernet Adapter Driver Diskette", TAGFILE = disk1
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[Files-DC21040]
1,DC21X4.SYS , SIZE=999
[Files-DC21041]
1,DC21X4.SYS , SIZE=999
[Files-DC21140]
1,DC21X4.SYS , SIZE=999
[Files-EB40]
1,DC21X4.SYS , SIZE=999
[Files-EB41]
1,DC21X4.SYS , SIZE=999
[Files-EB140]
1,DC21X4.SYS , SIZE=999
[Files-MULTIA]
1,DC21X4.SYS , SIZE=999
[Files-DE434]
1,DC21X4.SYS , SIZE=999
[Files-DE435]
1,DC21X4.SYS , SIZE=999
[Files-DE500]
1,DC21X4.SYS , SIZE=999
[Files-DE425]
1,DC21X4.SYS , SIZE=999
[Files-Hlp]
1,DC21X4.HLP , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    DC21140  = "10/100 Base-TX PCI Bus Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "10/100 Base-TX PCI Bus Ethernet Adapter Driver Diskette"

FunctionDC21140Title = "10/100 Base-TX PCI Bus Ethernet Adapter Setup"
ProductHardwareDC21140Description = "10/100 Base-TX PCI Bus Ethernet Adapter"

ConnectionList	= ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList	= ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle	= "Error: "$(Function$(Option)Title)
ShellCodeErrorText	= "Shell Code Error."
CANNOT_FIND_ANY_CARD	= "Network card is not present in the system"
[DialogConstantsENG]
Help	    = "&Help"
Exit	    = "Cancel"
OK	    = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	    = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
	  "network adapter. Select [Help] for a detailled "+
	  "description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.80