Driver Installation - for Windows for Workgroups v3.10
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
(1) Introduction:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
This document describes the procedure to install Microsoft
Windows for Workgroups v3.10 driver for 10/100 Base-TX PCI
Bus Ethernet Adapter.
(2) Location of Driver:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
\WFW31\DC21X4.DOS
(3) Sample Configuration Files:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
%%% CONFIG.SYS (install will add these lines) %%%
DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
DEVICE=C:\WINDOWS\PNPND.DOS
*** DEVICE=C:\WINDOWS\MSIPX.SYS (Added if running NetWare)
DEVICE=C:\WINDOWS\WORKGRP.SYS
LASTDRIVE=P
%%% PROTOCOL.INI (install creates this file) %%%
[network.setup]
version=0x3100
netcard=DC21X4,1,DC21X4
transport=ms$netbeui,MS$NETBEUI
lana0=DC21X4,1,ms$netbeui
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NETBEUI
[DC21X4]
DriverName=DC21X4$
SLOT=16
SIA_MODE=AUTOSENSE
DATA_RATE=MB100
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=32
BINDINGS=DC21X4
LANABASE=0
%%% AUTOEXEC.BAT %%%
C:\WINDOWS\NET START
*** C:\WINDOWS\MSIPX (Added if running NetWare)
*** C:\WINDOWS\NETX (Added if running NetWare)
(4) New Windows for Workgroups Installation:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
1. When installing Windows for Workgroups, you are prompted for a
network driver. Select the "Unlisted or Updated Network Driver".
2. Insert the driver diskette containing OEMSETUP.INF
and DC21X4.DOS files.
3. Specify the directory for the driver (A:\WFW31) and select the
adapter driver.
4. Select Advanced options, and make sure the parameters match the
card setting. The installation program copies the necessary files
and creates PROTOCOL.INI for use with the adapter.
5. Continue the installation process.
(5) Existing Windows for Workgroups Installation:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
1. Select the "Control Panel" icon in the Main Group.
2. Select the "Network" icon.
3. Select the "Adapters" button.
4. Select the Add option.
5. Select "Unlisted or Updated Network Adapter".
6. Insert the adapter driver disk with OEMSETUP.INF and DC21X4.DOS and
specify the path A:\WFW31.
7. Select the adapter driver.
8. The installation program copies the necessary files and creates
creates PROTOCOL.INI for use with the adapter.
9. Select "Close" and when prompted, restart computer for changes to
take affect and complete the installation.
(6) To Add Netware:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
1. Select the "Control Panel" icon in the Main Group.
2. Select the "Network" icon.
3. Select the "Networks" button.
4. Select "Novell Netware" and select the add button.
5. Select "OK" and close the Network icon.
6. Select reboot computer and restart Windows.
(7) Notes:
ÄÄÄÄÄÄÄÄÄÄ
1. Installing Multiple LAN Adapters:
There are two different method to complete it:
(a) Under DOS mode, you can modify the AdapterID in file
C:\WFW31\PROTOCOL.INI by yourself.
(b) Or you can enter Windows for WorkGroup and follow above
setup procedurc step 2,then click on "Setup.." button, select
"Advanced...",fill AdapterID in Value item. Last step to
select OK and close NETWORK SETUP.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.