HMC86314 OS/2 2.0x PM Display Driver
Installation Instructions
10/08/93
Version 1.0
Contents:
-----------
disk 1
1. SVGA.EXE .PMI file generation utility.
2. PSHMC314.DSC HMC 86314 display driver configuration file.
3. HMC768AC.DSP HMC 1024x768x16 display driver profile.
4. BVHSVGA.DL_ Basic Video Handler for SVGA.
5. IBMVGA32.DL_ 32 bit PM device independent display driver.
6. SETUPHMC.BAT HMC setup batch file
7. VSVGA.SYS Virtual Device Driver for DOS
8. HMC768A.DSP HMC 1024x768x16 display driver profile.
9. SV76816.DL_ 32 bit 1024x768 16 color PM display driver.
10. README.TXT
Notes:
----------
This installation is valid only for IBM OS/2 2.0 with XR 06055 upgrade which has both
16 bit and 32 bit PM graphic engines. Also the XR 060055 upgrade includes a display
driver installation program - DSPINSTL which simplifies the process of installing a new
display driver. This package includes a 32 bit 1024x768 16 color PM display driver that
can be used with HMC 86314 graphic card.
To Install:
-----------
1. Install OS/2 2.0 and XR 06055 upgrade as you normally would, with standard VGA
support.
2. After OS/2 2.0x is fully functional with standard VGA, at DOS C:\ prompt insert
"HMC display driver diskette 1" into driver A and type :
A:\setuphmc
This action will copy the SVGA.EXE, PSHMC314.DSC and VSVGA.SYS to C:\OS2 ,
C:\OS2\INSTALL and C:\OS2\MDOS respectively.
3. Switch to OS2 command line and change to C:\OS2\INSTALL directory. Then execute
the following command:
DSPINSTL
a. A panel will appear from which your select either Primary or Secondary display
driver.
click on <Primary Display>
click on <OK>
b. Another panel will appear from which you select the Display Adapter Type.
try to find <HMC 86314> using scroll bar up or down
click on <HMC 86314>
click on <OK>
After this, the system will execute the SVGA.EXE to generate the PMI file for the
adapter you just selected.
c. Another panel will appear from which you select the display resolution and there
is only one resolution available - 1024x768x16.
click on <OK>
d. System then asks you to specify the source directory. It should be A:\. If it is not
A:\, make a change.
click on <OK>
After this, the system will start to copy files from diskette to hard driver. It also
makes the necessary changes on CONFIG.SYS and OS2.INI.
e. A panel will appear again from which your select either Primary or Secondary
display driver. This time please do:
click on <CANCEL>
f. The installation is complete. Shutdown OS2 2.0x and restart your computer
again.
4. To restore to the original VGA mode, repeat step 3 and select the VGA as the adapter
type.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.