;*********************************************************************** ; ; OEMSETUP.INF ; ; Eiger Labs EigerNet PCMCIA Adapter Setup Script ; Copyright Eiger Labs, Inc. 1996 ; ; History: ;*********************************************************************** ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ... ; ; Types specific to networking: ; ; NetAdapter, a netcard / adapter combination or just a netcard ; NetDriver, just a netcard driver ; NetTransport, a complete NDIS-compliant TDI transport stack ; NetService, an NT networking service ; NetWork, a complete network ensemble. ; NetProvider a complete network which supports NT MPR protocol ;----------------------------------------------------------------------- [Identification] OptionType = NetAdapter ;----------------------------------------------------------------------- ; PlatformsSupported ; ------------------ ; This identifies the platforms supported by the adapter card. ; Possible types are: ; ; ISA, EISA and MCA ;----------------------------------------------------------------------- [PlatformsSupported] ISA EISA MCA ;----------------------------------------------------------------------- ; LANGUAGES SUPPORTED ; ------------------- ; ; The languages supported by the OEM INF, For every language supported ; we need to have a separate text section for every displayable text ; section. ; ;----------------------------------------------------------------------- [LanguagesSupported] ENG ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the OEM Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] ELNDIS ;----------------------------------------------------------------------- ; OPTION TEXT SECTION ; ------------------- ; These are text strings used to identify the option to the user. There ; are separate sections for each language supported. The format of the ; section name is "OptionsText" concatenated with the Language represented ; by the section. ; ;----------------------------------------------------------------------- [OptionsTextENG] ELNDIS = "Eiger Labs EigerNet PCMCIA adapter" ;*********************************************************************** ; CONSTANTS FOR USING DIALOGS ;*********************************************************************** [FileConstants] ; ; File names, etc. ; CompanyName = "Eiger " UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 ; ; EventLog Message File ; NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\ELNDIS.sys" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ; Product Info ; Manufacturer = $(CompanyName) ProductMajorVersion = "1" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ; ; Software ; ProductSoftwareName = "ELNDIS" ProductSoftwareTitle = "Eiger Labs EigerNet PCMCIA adapter" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ELNDIS.sys" NetRuleSoftwareType = "ELNDISSys ndisDriver ELNDISDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """ELNDISSys"" yes no container" NetRuleSoftwareClass = {"ELNDISDriver basic"} NetRuleSoftwareBindable = {"ELNDISDriver ELNDISAdapter non exclusive 100"} ; ; Hardware ; ProductHardwareName = "ELNDIS" ProductHardwareELNDISTitle = "Eiger Labs EigerNet PCMCIA adapter" NetRuleHardwareType = "ELNDIS ELNDISAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"ELNDISAdapter basic"} ; ; Registry Key ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] ; ; Program flow control variables. ; from = "" to = "" ; ; Return codes; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [FileConstantsENG] ; ; Variables to support thermometer gauge and error dialogs ; ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ; ; Product Info ; FunctionTitle = "Eiger Labs EigerNet PCMCIA adapter" ; ; Software ; ProductSoftwareDescription = "Eiger Labs EigerNet PCMCIA adapter" ; ; Hardware ; ProductHardwareELNDISDescription = "Eiger Labs EigerNet PCMCIA adapter" DialogDllName = "EL.dll" IRQList = ^(IRQChoices,1) IRQValues = ^(IRQChoices,2) IOAddressList = ^(IOAddressChoices, 1) IOAddressValues = ^(IOAddressChoices, 2) MemAddressList = ^(MemAddressChoices, 1) MemAddressValues = ^(MemAddressChoices, 2) SlotList = ^(SlotChoices, 1) SlotValues = ^(SlotChoices, 2) NodeAddrList = ^(NodeAddrChoices, 1) NodeAddrValues = ^(NodeAddrChoices, 2) [DialogConstantsENG] ; ; Common button names, etc. ; Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [date] ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate ;----------------------------------------------- ; Input DIALOGS ;----------------------------------------------- [FileDependentDlgENG] DlgType = "RadioCombination" DlgTemplate = "EL" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO} Combo1Label = "&IRQ:" Combo2Label = "I/&O Address:" Combo3Label = "&Memory Address:" Combo4Label = "&PCMCIA Slot:" Edit1Label = "&Network Address:" Check1Label = "&Disable Direct Enabler" Combo1List = $(IRQList) Combo1Out = $(IRQValue) Combo2List = $(IOAddressList) Combo2Out = $(IOAddressValue) Combo3List = $(MemAddressList) Combo3Out = $(MemAddressValue) Combo4List = $(SlotList) Combo4Out = $(SlotValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out} EditTextLim = 17 EditTextIn =$(NetworkAddress) [SlotChoices] S_1 = "1", 1 S_2 = "2", 2 S_3 = "AUTO", 0 [IOAddressChoices] IOBase_1 = "0xA40",2624 IOBase_2 = "0x300",768 IOBase_3 = "0x340",832 IOBase_4 = "0x380",896 IOBase_5 = "0x3c0",960 IOBase_6 = "0x280",640 IOBase_7 = "0x2c0",704 IOBase_8 = "0x2A40",10816 [MemAddressChoices] MA_41 = "0xC8000", 819200 MA_42 = "0xC9000", 823296 MA_43 = "0xCA000", 827392 MA_44 = "0xCB000", 831488 MA_45 = "0xCC000", 835584 MA_46 = "0xCD000", 839680 MA_47 = "0xCE000", 843776 MA_48 = "0xCF000", 847872 MA_49 = "0xD0000", 851968 MA_50 = "0xD1000", 856064 MA_51 = "0xD2000", 860160 MA_52 = "0xD3000", 864256 MA_53 = "0xD4000", 868352 MA_54 = "0xD5000", 872448 MA_55 = "0xD6000", 876544 MA_56 = "0xD7000", 880640 MA_57 = "0xD8000", 884736 MA_58 = "0xD9000", 888832 MA_59 = "0xDA000", 892928 MA_60 = "0xDB000", 897024 MA_61 = "0xDC000", 901120 MA_62 = "0xDD000", 905216 MA_63 = "0xDE000", 909312 MA_64 = "0xDF000", 913408 MA_65 = "0xE0000", 917504 MA_66 = "0xE1000", 921600 MA_67 = "0xE2000", 925696 MA_68 = "0xE3000", 929792 MA_69 = "0xE4000", 933888 MA_70 = "0xE5000", 937984 MA_71 = "0xE6000", 942080 MA_72 = "0xE7000", 946176 MA_73 = "0xE8000", 950272 MA_74 = "0xE9000", 954368 MA_75 = "0xEA000", 958464 MA_76 = "0xEB000", 962560 MA_77 = "0xEC000", 966656 MA_78 = "0xED000", 970752 MA_79 = "0xEE000", 974848 MA_80 = "0xEF000", 978944 [IRQChoices] IRQ_1 = "3", 3 IRQ_2 = "4", 4 IRQ_3 = "5", 5 IRQ_4 = "7", 7 IRQ_5 = "10", 10 IRQ_6 = "11", 11 IRQ_7 = "12", 12 IRQ_8 = "15", 15 ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] Set !G:DebugOutputControl = 1 Set !DebugOutputControl = 1 Set !STF_DISPLAYDEBUGOUTPUT = 1 Debug-Output $(STF_CONTEXTINFNAME)": Calling Identification" ; ; read-syms Identification Debug-Output $(STF_CONTEXTINFNAME)": Identification set OptionType = "$(OptionType) set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Debug-Output $(STF_CONTEXTINFNAME)": Identify returning Status = "$(Status)", Identifier = "$(Identifier)", Media = "$(Media) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] ; ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} Debug-Output $(STF_CONTEXTINFNAME)": Calling ReturnOptions" ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; ; Check if the platforms requested is supported ; ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] Set !G:DebugOutputControl = 1 Set !DebugOutputControl = 1 Set !STF_DISPLAYDEBUGOUTPUT = 1 Debug-Output $(STF_CONTEXTINFNAME)": Calling InstallOption" ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin ; ; Assume all is well. ; set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. ; Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set ActivateDetection = TRUE set StartLabel = configureadapter ; ; You cannot config the software component ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the ELNDIS driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set ActivateDetection = TRUE set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ;=================================================== ; Netcard Detection logic ; ; Initialize use of netcard detection; ; Construct require global parameter variables ; Debug-Output "OEMSETUP.INF: ==================================================" Debug-Output "OEMSETUP.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMSETUP.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "OEMSETUP.INF: Option is: "$(Option) Debug-Output "OEMSETUP.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "OEMSETUP.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "OEMSETUP.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "OEMSETUP.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "OEMSETUP.INF: ==================================================" Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Goto $(StartLabel) Endif ; Establish presentation versions of choice lists. ; If this is a detected card, set the flag. Ifstr(i) $(!STF_NCDETECT) == YES Ifstr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Debug-Output "OEMSETUP.INF: Setting DetectedCard to TRUE" Endif Endif ; ; End Netcard Detection logic ;=================================================== Set IRQValue = *($(IRQValues), 5) Set IOAddressValue = *($(IOAddressValues), 2) Set MemAddressValue = *($(MemAddressValues), 9) Set SlotValue = *($(SlotValues), 3) set NetworkAddress = *($(EditTextOut),1) set DirectEnabler = 1 ;set default value for DirectEnabler (disable direct enabler) Shell "" DebugConfiguration "After parameter querying" Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + ; ; First, check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue ; CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; ; Cannot Install the same software again ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; ; Add a new adapter card? ; ;Shell $(UtilityInf), CardExistedDlg Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL",+ "The Eiger Labs EigerNet PCMCIA adapter is installed! You can't install another one." ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ;=================================================== ; Netcard Detection logic ; ; If this is a detected card, query its parameters ; and merge them into the default list. ; Ifstr(i) $(DetectedCard) != TRUE install "Install-Dll" Goto adaptersetup Endif ; ; Get the detected parameters ; StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL install "Install-Dll" Goto adaptersetup Endif ; ; Merge the detected values in. ; Set DetectedParams = $($R1) Debug-Output "OEMSETUP.INF: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) ; ; End Netcard Detection logic ;=================================================== install "Install-Dll" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; ; Get the other parameters; they're attached to the service parameters key ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) ; ; We don't need the services key, so close it. ; CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ; ; Get the old values ; EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "InterruptNumber" set IRQValue = $(ValueData) else-Ifstr(i) $(ValueName) == "IoBaseAddress" set IOAddressValue = $(ValueData) else-Ifstr(i) $(ValueName) == "MemoryMappedBaseAddress" set MemAddressValue = $(ValueData) else-Ifstr(i) $(ValueName) == "SLOT" set SlotValue = $(ValueData) else-ifstr(i) $(ValueName) == "Pcmcia" set DirectEnabler = $(ValueData) else-ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddress = $(ValueData) endif EndForListDo ; ; Put up the adapter configuration dialog if necessary. ; adaptersetup = + Shell "" DebugConfiguration "before displaying dialog" Set from = adapteroptions ;=================================================== ; Netcard Detection logic ; ; Check that this card's parameters can be ; fully detected. ; Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMSETUP.INF: parameter confidence too low to bypass configuration" Goto adapteroptions Endif ; ; If this is a detected card and we're in EXPRESS mode, ; see if the parameters as they currently exist are ; verifiably correct. ; Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterverify Endif Endif ; ; End Netcard Detection logic ;=================================================== adapteroptions = + set OldNetAddress = $(NetworkAddress) LoadLibrary "disk 1" $(DialogDllName) hLib set IRQValue = *($(IRQList),~($(IRQValues),$(IRQValue))) set IOAddressValue = *($(IOAddressList),~($(IOAddressValues),$(IOAddressValue))) set MemAddressValue = *($(MemAddressList),~($(MemAddressValues),$(MemAddressValue))) set SlotValue = *($(SlotList),~($(SlotValues),$(SlotValue))) ifint $(DirectEnabler) == 0 set CheckItemsIn = {"OFF"} else set CheckItemsIn = {"ON"} endif Debug-Output $(STF_CONTEXTINFNAME)" IRQ is "$(IRQValue) Debug-Output $(STF_CONTEXTINFNAME)" IO Address is "$(IOAddressValue) Debug-Output $(STF_CONTEXTINFNAME)" Memory address is "$(MemAddressValue) Debug-Output $(STF_CONTEXTINFNAME)" Slot is "$(SlotValue) Debug-Output $(STF_CONTEXTINFNAME)" Direct is "$(DirectEnabler) Debug-Output $(STF_CONTEXTINFNAME)" Node Address is "$(NetworkAddress) read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" $(hLib) set ExitButton = $(ButtonPressed) Debug-Output " ButtonPressed "$(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IRQValue = $(Combo1Out) set IOAddressValue = $(Combo2Out) set MemAddressValue = $(Combo3Out) set SlotValue = $(Combo4Out) set ExitButton = $(ButtonPressed) set NetworkAddress = *($(EditTextOut),1) set DirectEnabler = 0 ifstr(i) *($(CheckItemsOut), 1) == "ON" set DirectEnabler = 1 endif Debug-Output $(STF_CONTEXTINFNAME)" Input adapter options" Debug-Output $(STF_CONTEXTINFNAME)" IRQ is "$(IRQValue) Debug-Output $(STF_CONTEXTINFNAME)" IO Address is "$(IOAddressValue) Debug-Output $(STF_CONTEXTINFNAME)" Memory Address is "$(MemAddressValue) Debug-Output $(STF_CONTEXTINFNAME)" Slot is "$(SlotValue) Debug-Output $(STF_CONTEXTINFNAME)" Direct is "$(DirectEnabler) ui pop 1 ; goto nextstep else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ; ; Unknow command ; ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif Debug-Output "Adapteroptions." adapterverify = + Shell "" DebugConfiguration "after running dialog" ;=================================================== ; Netcard Detection logic ; ; If this is a detected card, attempt to validate the options ; Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Debug-Output "OEMSETUP.INF: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "OEMSETUP.INF: Param_VerifyCard succeeded" Goto skipoptions Endif ; ; Give the user a chance to retry or force the options given. ; Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning ; ; End Netcard Detection logic ;=================================================== ; ; If installing, go create the necessary keys; ; if configuring, they're already open. ; skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; ; Add Software Component ; ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" set FirmDatabaseKeyName = $(PCMCIADatabaseKeyName)"\Eiger Labs, Inc." set OurDatabaseKeyName = $(FirmDatabaseKeyName)"\EigerNet 10/100BT" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey ifstr $(PCMCIADatabaseKey) != $(NULL) OpenRegKey $(!REG_H_LOCAL) "" $(FirmDatabaseKeyName) $(MAXIMUM_ALLOWED) FirmDatabase ifstr $(FirmDatabase) == $(NULL) CreateRegKey $(PCMCIADatabaseKey) {"Eiger Labs, Inc.", 0, 0} "" $(MAXIMUM_ALLOWED) "" FirmDatabase else ;Data base for all firm's adapter open succeeded OpenRegKey $(!REG_H_LOCAL) "" $(OurDatabaseKeyName) $(MAXIMUM_ALLOWED) OurDatabase ifstr $(OurDatabase) != $(NULL) ;Data base for all firm's adapter open succeeded CloseRegKey $(OurDatabase) DeleteRegTree $(FirmDatabase) "EigerNet 10/100BT" endif endif CreateRegKey $(FirmDatabase) {"EigerNet 10/100BT", 0, 0} "" $(MAXIMUM_ALLOWED) 0 OurDatabase SetRegValue $(OurDatabase) {Driver, 0, $(!REG_VT_SZ),"ELNDIS"} CloseRegKey $(OurDatabase) CloseRegKey $(FirmDatabase) CloseRegKey $(PCMCIADatabaseKey) Endif endif ; ; Create the HARDWARE\Netcard region and its corresponding service ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; ; At this point: ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number ; set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + Debug-Output $(InfName)" KeyParameters is "$(KeyParameters) Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; ; Add the rest of the parameters to the Services area ; set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValue))) set IOAddressValue = *($(IOAddressValues),~($(IOAddressList), $(IOAddressValue))) set MemAddressValue = *($(MemAddressValues),~($(MemAddressList), $(MemAddressValue))) set SlotValue = *($(SlotValues), ~($(SlotList),$(SlotValue))) set MemSize = 4096 Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOAddressValue)},+ {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemAddressValue)},+ {MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),$(MemSize)},+ {SLOT,$(NoTitle),$(!REG_VT_DWORD),$(SlotValue)},+ {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),$(DirectEnabler)},+ {VerboseStatus,$(NoTitle),$(!REG_VT_DWORD),1}} ifstr $(NetworkAddress) != "" set NewValueList = >($(NewValueList),{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}) endif Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ; ; If the network address has been deleted then also delete it from ; the registry. ; ifstr $(OldNetAddress) != "" ifstr $(NetworkAddress) == "" DeleteRegValue $(KeyParameters) NetworkAddress endif endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; ; First determine whether we want to do upgrade or update for software ; or hardware component. Then we will determine whether the Mode is ; update or upgrade. ; ; If the same version of the product existed in the registry, we do ; update. Otherwise, we will do a upgrade ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Upgrade software component ; ; see whether the same version exist or not ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) ; ; Update the binaries ; Split-String $(!NTN_Infname), "\", FilenameList QueryListSize ListSize $(FilenameList) set !UG_Filename = *($(FilenameList), $(ListSize)) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; ; do nothing for update ; ifint $(Version) != $(ProductVersion) ; ; If the major version number is not the same, ; it is major upgrade. So let Upgrade the product ; ; ; make other upgrade change if necessary ; endif CloseRegKey $(KeyProduct) else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif else ; ; upgrade/update hardware component ; There is no different between upgrade and update for hardware ; component ; ; 1. Get the Service Name ; 2. Change the NetRule section if necessary ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) ; ; Get Service name ; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) ; ; Change the NetRule if necessary ; OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) ; ; Make the change.... ; else ; ; Error, cannot open net rules key ; goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif ; ; 3. Change the service section of the hardware. i.e., ; ParameterName change, value change, etc. ; OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) ; ; Get the ServiceKey to change the Start value ; or Type value. Or open Parameters key to ; change the hardware parameters if necessary. ; CloseRegKey $(ServiceKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif endif goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = "Error: "$(FunctionTitle) set STF_MB_TEXT = "Shell Code Error" set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETUP.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IRQValue is "$(!p:IRQValue) Debug-Output $(InfName)" IOAddressValue is "$(!p:IOAddressValue) Debug-Output $(InfName)" MemAddressValue is "$(!p:MemAddressValue) Debug-Output $(InfName)" SlotValue is "$(!p:SlotValue) Debug-Output $(InfName)" Direct is "$(!p:DirectEnabler) return ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ; ; Add the files to the copy list ; ; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes ; the other INF files ; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ;set STF_VERSION = "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "Eiger Labs EigerNet PCMCIA adapter setup disk" [Files-Inf] 1, oemsetup.inf, SIZE=27002, RENAME=$(!UG_Filename) [Files-Dll] 1, EL.dll, SIZE=5120 [Files-ELNDIS] 1, ELNDIS.SYS, SIZE=45568Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.