1. driver.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (driver.zip)

A. How to install the Novell RPL Server

 1. Creating a remote boot diskette(DOS 5.0 or later).
    Copy the following files into this boot diskette:

        COMMAND  COM
        IO       SYS
        MSDOS    SYS
        LSL      COM
        FEAODI   COM
        IPXODI   COM
        NETX     EXE
        (or VLM.EXE & *.VLM file)
        AUTOEXEC BAT
        CONFIG   SYS

      ==>AUTOEXEC.BAT example
           PATH F:\LOGIN;
           SET COMSPEC=F:\LOGIN\COMMAND.COM
           LSL
           FEAODI
           IPXODI
           NETX or VLM

      ==>CONFIG.SYS example

           DEVICE=HIMEM.SYS
           STACKS=9,256
           DOS=HIGH,UMB
           FILES=30
           BUFFERS=30
           LASTDRIVE=Z

 2. Login the server as ADMIN useing DOS boot diskette.

 3. Change directory to SYS:SYSTEM

 4. With the DOS boot diskette in driver A: execute the DOSGEN utility. This
    creates a DOS boot image file named NET$DOS.SYS.

    For example:

        F:\SYSTEM\DOSGEN A:

 5. Copy NET$DOS.SYS to the SYS:LOGIN directory.

    For example:

        F:\SYSTEM\COPY NET$DOS.SYS F:\LOGIN

 6. Edit the AUTOEXEC.NCF file in the SYS:SYSTEM directory to load RPL
    protocol and bind it.

    For example:

        file server name NW411
        ipx internal net 1234

        load FEASRV SLOT=1 name=nw411_1 frame=ETHERNET_802.2
        load FEASRV SLOT=1 name=nw411_1_2 frame=ETHERNET_II
        load FEASRV SLOT=1 name=nw411_1_3 frame=ETHERNET_802.3
        load FEASRV SLOT=1 name=nw411_1_4 frame=ETHERNET_Snap

        bind ipx to nw411 _1 net=11
        bind ipx to nw411 _2 net=22
        bind ipx to nw411 _3 net=33
        bind ipx to nw411 _4 net=44

        # load rpl protocol and bind it =======
        load rpl
        bind rpl to nw411_1
        #=======================================

        mount all

 7. Reboot the Netware Server.

 8. Configure the LAN Adapter ==> Boot ROM Enable and Boot ROM Speed.



B. How to install the Microsoft Windows NT RPL server

 1. Installing the "Remoteboot Service" on the NT Server.

    a. Choose the Control Panel under the NT Server, and then select the
       network options.
    b. Add the DLC and NetBEUI protocol in the protocols, and you also
       need add the Remoteboot service in the services.
    c. During the installation, you need to put the NTAS CD disk into the
       CD-ROM.

 2. Sharing the directory \RPLFILES in the NT Server.

    Sharing the directory \WINNT\RPL\RPLFILES by using File Manger sharing.

 3. Copy all the MS-DOS 6.22 ver files to \WINNT\RPL\RPLFILES\BINFILES\DOS622

    For example:

        a. Make the DOS 6.22 Boot floppy disk.
        b. attrib -s -h a:\io.sys in the boot disk.
        c. attrib -s -h a:\msdos.sys in the boot disk.
        d. copy a:\io.sys \WINNT\RPL\RPLFILES\BINFILES\DOS622
        e. copy a:\msdos.sys \WINNT\RPL\RPLFILES\BINFILES\DOS622

 4. Creating Remoteboot configuration for new adapter

    a. Copy the NDIS2(FEAND.DOS) for the Adapter to the
       "\WINNT\RPL\BBLOCK\NDIS" directory.
       * You can find FEAND.DOS from \BOOTROM\RPL\NTRPL directory.
    b. Create this directory \WINNT\RPL\BBLOCK\NETBEUI\FEAND and
       then copy the W95BB.CNF, FEAND.CNF and PROTOCOL.INI files to the
       directory.
       * You can find these files \BOOTROM\RPL\NTRPL directory.
    c. In MS-DOS Prompt type "NET START RemoteBoot".
    d. Use RPLCMD utility to add a bblock record for new adapter.
    e. Screen will display under line option and you following these do it.

        Adapter Boot Config Profile Service Vendor Wksta [Quite] V
        Add Del Enum:A
        VendorName=004095       <Ether ID>
        VendorComment=FEAND

        Adapter Boot Config Profile Service Vendor Wksta [Quite] B
        Add Del Enum:A
        BootName=DOSMX
        VendorName=004095
        BbcFile=BBLOCK\NETBEUI\FEAND\FEAND.CNF
        BootCommet=PCI Adapter   <Name of this adapter>
        WindowsSize=0

        Adapter Boot Config Profile Service Vendor Wksta [Quite] C
        Add Del Enum:A
        ConfigName=DOS622MX
        BootName=DOSMX
        DirName=DOS
        DirName2=DOS622
        FitShared=FITS\DOS622.FIT
        FitPersonal=FITS\DOS622P.FIT
        ConfigComment=DOS 6.22 for FEAND PCI Adaper <Name of the Config>
        DirName3=
        DirName4=

        Adapter Boot Config Profile Service Vendor Wksta [Quite] Q

    f. Shutdown Windows NT server, and reboot it.

 4. Login Administrator to NT server.

 5. Starting Remoteboot service and Remoteboot Manager
    a. In MS-DOS Prompt type "NET START Remoteboot"
    b. In Network administrator, select Remoteboot Manager
       1.Choose Remoteboot, New Profile, created a FEAND Profile Name
       2.Add new workstation for FEAND Adapter and choose FEAND Profile
         file.

 6. To config FEAND Adapter "Node ID (004095******)" and Running Boot ROM of
    Adapter FEAND Adapter.

  Note:
      If the new workstation Node ID is not match for your workstation,
      you can use "Convert Adapters" in Remoteboot option.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.