MSCLIENT.TXT Driver File Contents (fast200b.zip)

*****************************************************************************
*                                                                           *
*                 CNet FAST200 PCI Fast Ethernet Adapter                    *
*                                                                           *
*              NDIS/2 Driver for Microsoft Network Client 3.0               *
*                                                                           *
*****************************************************************************

Installation:
=============
  Before you start with the installation procedure, make sure that the
  adapter is properly installed and configured. Similarly, make sure
  that your Microsoft Network Client is properly installed.
  (If not, The installation utility SETUP.EXE  is located on Microsoft
  Network Client v3.0 for MS-DOS Disk. Run SETUP.EXE from Disk and the
  SETUP program screen will appear, and You must complete each of the
  questions. These options are specific to your needs. The installation
  procedure will transfer files to a specific directory on the client
  and modify existing configuration files to fit your specific needs.)

  1. Change to the Microsoft Network Client subdirectory, and run
     SETUP.EXE

  2. The screen will display some infomation. Press <Enter> .

  3. Responds to the screen prompts, selecting "Change Network
     Configuration",then press <Enter>.

  4. Move the highlight to "Add Adapter", press <Enter>.

  5. Select "Network adapter not shown on list below ...".

  6. Insert the driver diskette in floppy A, and specify your
     pathname A:\NDIS2\DOS, then press <Enter>.

  7. Follow screen instructions to complete the process. Simply
     pressing <Enter> for each screen display will select the default
     options. Press <Enter> until you reach the display prompting you
     to reboot your system.

-----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.00