1. pro200b.zip Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (pro200b.zip)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
; OEMSETUP FILE FOR CNet PRO200 PCI Fast Ethernet adapters
;     Windows NT v3.51
;     Windows NT v4.0
;
;     Supported adapters:
;         CNet PRO200 PCI Fast Ethernet Adapter
;
;
; Usage:
;
;     This file is the installation/configuration/deinstallation
;     procedure of the CNet PRO200 driver for Windows NT.  It can be called
;     from Windows Setup directly, or via the Windows NT Networks
;     Control Program Applet (NCPA) from inside the Windows
;     Control Panel.
;
;----------------------------------------------------------------------------------------
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    DM9

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "CNet Technology, Inc."
ProductMajorVersion     = "3"
ProductMinorVersion     = "00"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

VendorID = 4738  ;; 1282 Vendor Identification
DM9102ID = 37122  ;; 9102 Device Identification
DM9009ID = 36873  ;; 9009 Device Identification


ProductSoftwareName         = "DM9PCI"
ProductSoftwareTitle        = "CNet PRO200 PCI Fast Ethernet Adapter Driver"
ProductSoftwareImagePath3   = "\SystemRoot\System32\drivers\DM9PCI3.sys"
ProductSoftwareImagePath4   = "\SystemRoot\System32\drivers\DM9PCI4.sys"
ProductSoftwareDriverPath3  = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci3.sys"
ProductSoftwareDriverPath4  = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci4.sys"
NetRuleSoftwareType         = "DM9PCISys ndisDriver DM9PCIDriver"
NetRuleSoftwareType         = "DM9PCISys ndisDriver DM9PCIDriver"
NetRuleSoftwareUse          = $(SoftwareType)
NetRuleSoftwareBindForm     = """DM9PCISys"" yes no container"
NetRuleSoftwareClass        = {"DM9PCIDriver basic"}
NetRuleSoftwareSWBindable   = {"DM9PCIDriver DM9Adapter non exclusive 100"}

ProductHardwareName         = "DM9PCI"
InstallerDllName            = "DM9INST.DLL"
InstallerProc               = "DM9InstNtProc"
InstallerMediaProc          = "DM9InstDiagBox"
Source_Directory            = ""

ProductHardwareDM9Title = "CNet PRO200 PCI Fast Ethernet Adapter "
NetRuleHardwareDM9Type  = "DM9 DM9Adapter"
NetRuleHardwareDM9Class = {"DM9 Adapter basic"}
AdapterDM9Type = 5   ;; PCI board
HelpDM9Id = 30
;DM9102PCIID = 2432832130 ;; 0x91021282 VendorID+DeviceID

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;simoncc
VersionKeyName  = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)                ;Adapter Name
    set SrcDir   = $($2)                ;Source Directory
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    install "Install-Dll"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
    endif
   goto installproduct
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
;;;;;;;;;simoncc
    set FS_KeyThisService = ""
    set FS_KeyParameters  = ""
    set FS_KeyComponent   = $(KeyProduct)
    set FS_TypeComponent  = ""

    Shell $(UtilityInf), BaseServiceKey

    set FS_KeyServices = $($R1)
    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
       Goto fatalregistry
    endif

    EnumRegValue $(FS_KeyComponent) FS_ValueList
    set FS_SvcName = ""

    ForListDo $(FS_ValueList)
        set FS_ValueName = *($($),1)
        Ifstr(i) $(FS_ValueName) == ServiceName
            set FS_SvcName = *($($),4)
            goto F_S_Break1
        endif
    EndForListDo
F_S_Break1 = +

    Ifstr $(FS_SvcName) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       Goto fatalregistry
    endif

    OpenRegKey $(FS_KeyServices) "" $(FS_SvcName) $(MAXIMUM_ALLOWED) FS_KeyThisService
    Ifstr $(FS_KeyThisService) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Goto fatalregistry
    endif

    OpenRegKey $(FS_KeyThisService) "" "Parameters" $(MAXIMUM_ALLOWED) FS_KeyParameters
    Ifstr $(FS_KeyParameters) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Goto fatalregistry
    endif
    CloseRegKey $(FS_KeyParameters)
    CloseRegKey $(FS_KeyThisService)
    CloseRegKey $(FS_KeyParameters)

    set KeyParameters = $(FS_SvcName)

    LoadLibrary "disk 0" $(InstallerDllName) hLib
    LibraryProcedure Result $(hLib) $(InstallerMediaProc) $(!STF_HWND) $(KeyParameters)
    FreeLibrary $(hLib)
    goto successful

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

installproduct =+
    StartWait
;;;;;;;;
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DM9102ID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         set ErrorCondition = $(!SHELL_CODE_ERROR)
    else-ifstr(i) $($R0) == {}
            set ErrorCondition = $(!SHELL_CODE_ERROR)
        endif
    endif
    set AdapterList = $($R0)

    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DM9009ID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR)
             goto ShellCodeError
         endif
    else-ifstr(i) $($R0) == {}
            ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR)
                set Error = $(CANNOT_FIND_ANY_CARD)
                set CommonStatus = USER_CANCEL
                set from = end
                goto nonfatal
            endif
        endif
    endif

    ifint $(ErrorCondition) == $(!SHELL_CODE_ERROR)
        set AdapterList = $($R0)
    else
        set AdapterListAppend = $($R0)
        ForListDo $(AdapterListAppend)
            set AdapterList = >($(AdapterList), $($))
        EndForListDo
    endif

    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif

        OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
        GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
        CloseRegKey $(KeyVersion)
        Set NTVersion = *($(VersionStruct),4)

        Ifstr(i) $(NTVersion) == "3.51"
            Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), +
                $(ProductSoftwareName), +
                $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                $(ProductSoftwareImagePath3), "kernel", "NDIS", {}, "",+
                $(NetEventDLL)
        else
            Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), +
                $(ProductSoftwareName), +
                $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                $(ProductSoftwareImagePath4), "kernel", "NDIS", {}, "",+
                $(NetEventDLL)

        endif
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)
                Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                ifstr $($R0) != "NO_ERROR"
                    set Error = $($R0)
                    goto fatal
                endif
                ifstr(i) $($R1) != "YES"
                    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                    ifint $($R4) != -1
                        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                    endif
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set RegistryErrorIndex = $($R0)
                    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                         EndWait
                         CloseRegKey $($R1)
                         CloseRegKey $($R2)
                         CloseRegKey $($R3)
                         goto fatalregistry
                    endif

                    Set HardNetCardKey      = $($R1)
                    Set HardNetRuleKey      = $($R2)
                    Set HardParameterKey    = $($R3)
                    set AdapterNumber = $($R4)
                    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                        {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                        {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                         goto ShellCodeError
                    endif
                    set BusTypeNum = 5
                    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                        {AdapterPCIID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)PCIID)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif

                    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    CloseRegKey $(HardNetCardKey)
                    CloseRegKey $(HardNetRuleKey)
                    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                        {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                        {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    CloseRegKey $(HardParameterKey)
;;;;;;;simoncc
                    LoadLibrary "disk 0" $(InstallerDllName) hLib
                    LibraryProcedure Result $(hLib) $(InstallerMediaProc) $(!STF_HWND) $(ProductHardwareName) $(AdapterNumber) $(BusNum) $(DeviceNum)
                    FreeLibrary $(hLib)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
                endif
        endif
    EndForListDo
    EndWait
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto removedriver
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto removedriver
;;;;;;;;;;;;;;;;;;;;;;simoncc
removedriver = +
    OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
    GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
    CloseRegKey $(KeyVersion)
    Set NTVersion = *($(VersionStruct),4)

    Ifstr(i) $(NTVersion) == "3.51"
;        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
;        Ifstr $(KeyProduct) == $(KeyNull)
;            AddFileToDeleteList $(ProductSoftwareDriverPath3)
;            AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName)
;        else
;            CloseRegKey $(KeyProduct)
;        endif
        LoadLibrary "disk 0" $(InstallerDllName) hLib
        LibraryProcedure Result $(hLib) $(InstallerProc)
        FreeLibrary $(hLib)
        AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName)
    else
        LoadLibrary "disk 0" $(InstallerDllName) hLib
        LibraryProcedure Result $(hLib) $(InstallerProc)
        FreeLibrary $(hLib)
        AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(InstallerDllName)
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""

    OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
    GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
    CloseRegKey $(KeyVersion)
    Set NTVersion = *($(VersionStruct),4)

    ifstr(i) $(AddCopy) == "YES"
        Ifstr(i) $(NTVersion) == "3.51"
            AddSectionFilesToCopyList Files-Ndis3 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
        else
            AddSectionFilesToCopyList Files-Ndis4 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
        endif
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Dll]
   set STF_VITAL        = ""
   AddSectionFilesToCopyList Files-Dll $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
   GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
   CloseRegKey $(KeyVersion)
   Set NTVersion = *($(VersionStruct),4)

   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   Ifstr(i) $(NTVersion) == "3.51"
       AddSectionFilesToCopyList Files-Ndis3 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
   else
       AddSectionFilesToCopyList Files-Ndis4 $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
   endif

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "CNet PRO200 PCI Fast Ethernet Adapter Driver"
    
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
1,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-Ndis3]
1,DM9PCI3.SYS , SIZE=999

[Files-Ndis4]
1,DM9PCI4.SYS , SIZE=999

[Files-Dll]
1,DM9INST.DLL,  SIZE=999

[LanguagesSupported]
    ENG
[OptionsTextENG]                                       
;OEM
;Show in the selection of cards when installation
DM9  = "CNet PRO200 PCI Fast Ethernet Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

;OEM
ProductSoftwareDescription = "CNet PRO200 PCI Fast Ethernet Adapter Driver"
ProductHardwareDM9Description = "CNet PRO200 PCI Fast Ethernet Adapter...  "

NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

[DialogConstantsENG]
;Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 0.89