1. USB_20ver_201.2.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (USB_20ver_201.2.exe)

Datafab Systems Inc.
www.datafab.com
www.datafabusa.com

As a manufacturer for worldwide markets, Datafab Systems Inc. is committed to providing customers with high quality products.  High standard quality control is applied to each stage of design and production.  Every single product is fully tested and checked before shipping out.  Datafab is an ISO9002 certified manufacturer.  But we never stop our efforts in quality improvements and service.

Image Card Reader User Manual

Accessing your images or files on the image card reader after proper hardware and software installation: 

1)      Reboot your computer after installation of software drivers 

2)      Have a memory card inserted into the reader (the light on the reader should be on solid) If not check the usb port or take out the card and try to replug the reader 

3)      Now the computer should recognize and create a new drive letter on your computer, you may verify this when you double click on MY COMPUTER icon on your desktop. 

4)      Open the new drive created simply by double clicking on the drive.  

5)      Now you should be able to view folders on your memory card.  Open the folder in which your digital camera has placed the images by double click into the folder 

6)      Once you are able to see the image files, simply double click on the file and your windows default image software or Internet Explorer will initiate to view your images. 

7)      From here you may choose to edit or copy these images into your hard drive.  Remember the images are being read directly from the memory card until you save or copy them into your hard drive. Do Not remove the card from the image card reader when the light is flashing.  Only remove the card from the image card reader when the light is lit solid.  When the light is flashing on the reader it means the computer is still accessing the card in the image reader. 

8)      Note:  The reader basically acts like a floppy drive or a zip drive.  Whatever you can do to your floppy drive you are able to do with the reader/memory card. Ex: cut and paste images or data from the memory card onto your hard drive. 

  

Accessing the image card reader using your imaging software program. 

1)      Open your imaging software program 

2)      From here you should be able to choose File – Open – and browse to our new drive (image card reader) that was created (refer to your imaging software manual on how to open a file from another source or drive) 

3)      Browse to the folder that contains your images and select the image you want to view. 

4)      Click OK and it should open the image you selected.  Now you can edit the pictures and when you are finished click file - save as - and rename the file and save it to any location you like on the hard drive. Do Not remove the card from the image card reader when the light is flashing.  Only remove the card from the image card reader when the light is lit solid.  When the light is flashing on the reader it means the computer is still accessing the card in the image reader.

Note:  SmartMedia Cards - Single slot SmartMedia Cards should be inserted with the gold plate face down and Dual Slot SmartMedia Cards should be inserted with the gold plate face up.


If you are running into problems installing the usb reader please verify that you are pluggin the usb reader directly to the usb port on the computer rather than through a usb hub or another usb device.  Also make sure that the memory card you have is good and not corrupt.  You can do so by reformatting the card using the camera.  Remember that when you reformat the card all data is erased from the card.

If continue to have any further trouble you can visit our websites at www.datafab.com or www.datafabusa.com for contact numbers for technical support.

Thank you for using Datafab!