****************************************************************************
Accton Technology Corporation.
EN2242 SERIES MINIPCI FAST ETHERNET ADAPTER
SCO Unix Driver Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright (C) 2000 Accton Technology Corporation.
All rights reserved.
****************************************************************************
Installation Procedure
----------------------
1. Prepare a formatted diskette on any DOS machine. For example, type:
C>format a:
Note: Make sure your diskette is free from bad sectors.
Verify this using the DOS SCANDISK or CHKDSK command.
2. Now login to UNIX system as supervisor (root) and enter the Maintenance
mode.
Note: Make sure that the current directory is "/" using UNIX command --
pwd.
Please follow the following steps to uncompress the package file:
> cd /tmp (and inserts the package floppy in the proper
drive, i.e. a:)
> doscp a:/EN5251.sc5 ./pcidriver
(then replaces with the prepared formatted diskette
done in step 1)
> #dd if=./pcidriver of=/dev/rfd0135ds18
(Note: Use another device file name if you use
different floppy drive)
Now the package installation diskette is ready for installing.
3. The following sections describe the configuration of the driver. It is
suggested that you should perform these instructions in the singler-user
environment.
Run "custom" utility and select the "Install new package" option. It will
prompt you to insert driver diskette and then choose the "FULL" option to
install this package.
After running the custom utility and the new package is installed, you
should use the "netconfig" command to add the driver into your system
like the step 4 below.
4. Run "netconfig". Add the desired chain. The Accton EN5251 PCI ethernet
driver will be called as "actn".
5. When the chain has been configured, select 'q' from the netconfig menu.
and relink the kernel at the prompt.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.