1. EN2242v106.zip Driver
2. OS2ODI.TXT File Contents

OS2ODI.TXT Driver File Contents (EN2242v106.zip)

*****************************************************************************
		        Accton Technology Corporation		    
                  EN2242 SERIES MINIPCI FAST ETHERNET ADAPTER
			    
	        NetWare ODI Client Driver For OS/2 Workstation
	        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
									    
	   Copyright (C) 2000 Accton Technology Corporation	    
			     All rights reserved.			    
*****************************************************************************

Installation Procedure
----------------------
  Before you install the ODI OS/2 client driver, make sure that the
  adapter is properly installed. Similarly, make sure that your NetWare
  Requester for OS/2 is properly installed.

  Please refer to "Novell NetWare Requester for OS/2" documentation for
  a detailed Requester and Utilities installation guide.

  1. Copy the driver EN5251.SYS and NET.CFG C:\NETWARE directory, the Novell
     NetWare Requester for OS/2 subdirectory, from A:\NETWARE\OS2ODI if you 
     insert the driver diskette into the drive A:.

  2. Add 'DEVICE=C:\NETWARE\EN5251.SYS' or replace the old ODI driver
     with EN5251.SYS in the CONFIG.SYS file. For example,

     DEVICE=C:\NETWARE\LSL.SYS          ; NetWare OS/2 Requester supported
     DEVICE=C:\NETWARE\DDAEMON.SYS      ; NetWare OS/2 Requester supported
     DEVICE=C:\NETWARE\EN5251.SYS      ; EN5251 ODI OS/2 Client Driver
     DEVICE=C:\NETWARE\IPX.SYS          ; NetWare OS/2 Requester supported

  3. Use a text editor to configure the NET.CFG in the C:\NETWARE directory.
     There is a text editor named E.EXE to use under OS/2 full screen.
     To edit the two files above, at the OS/2 prompt, type:

        E C:\CONFIG.SYS
     or
        E C:\NETWARE\NET.CFG

  4. Shutdown and reboot your system to get service of network.


Configuration Files
-------------------
  You can use the following parameters in NET.CFG to customize the EN5251
  ODI OS/2 client driver.

    File Name:		NET.CFG
    
    Sample of configuration file
    ----------------------------
           .
           .
           .
    Link Driver EN5251
            FRAME Ethernet_802.2
            FRAME Ethernet_802.3
            FRAME Ethernet_II
            FRAME Ethernet_SNAP


All trademarks or brand names mentioned are properties of their respective
companies.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.