****************************************************************************
Accton Technology Corporation
EN2242 SERIES MINIPCI FAST ETHERNET ADAPTER
NDIS 2 Driver For LAN Manager Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright (C) 2000 Accton Technology Corporation.
All rights reserved.
****************************************************************************
The EN5251 drivers in the MSLANMAN.DOS and MSLANMAN.OS2 diectories conform
to the Network Driver Interface Specification (NDIS) 2.0 as defined by
Microsoft/3Com.
NDIS 2 Driver Installation on LAN Manager v2.0
==============================================
1. Type "Setup" in the LAN Manager directory and press Enter.
2. Choose "Import Network Drivers..." in the "Action" field.
Press <Enter> to continue.
3. Insert your Driver Diskette into either drive A: or B:.
Then press <Enter> to see the list of Imported Network
Drivers on the screen.
4. Press the <Space> Bar to select the appropriate Network Adapter
(i.e. "Accton EN5251 Based Fast Ethernet Adapter"), then press
<Enter> to confirm your choice.
5. Follow screen instructions to complete the process, until the Network
Driver appears on screen.
6. Identify your Network Adapter if asked. For example, select
"Accton EN5251 Based Fast Ethernet Adapter" to confirm any
EN5251 Adapter.
7. Select the <Add driver> and the <Add protocol> options. Then select
<OK> to confirm your choices. The Workstation's primary parameters
should appear on screen.
8. Respond to all prompts issued on screen to complete the process.
Select <OK> to confirm a choice.
9. Save all selections. Choose "Save" from the "Action Menu".
10. Press <F3> to exit.
NDIS 2 Driver Installation on LAN Manager v2.1
==============================================
1. Type "lmsetup" in the LAN Manager directory and press <Enter>. The
Microsoft LAN Manager Setup screen should appear.
2. Choose "Network Drivers..." in the "Configuration" field. Press <Enter>
to confirm your choice.
3. Choose <Add New Configs> and press <Enter> to display a list of Network
Adapter Drivers.
4. Choose <Other Driver> and press <Enter>.
5. Insert the Driver Diskette into drive A: or B: of your PC. Indicate the
drive location of the diskette and select <OK> to proceed.
6. Select the appropriate Network Adapter Driver from the list. For
example, select "Accton EN5251 Based Fast Ethernet Adapter",
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space> bar to highlight your
choice.
8. Select <OK> to confirm your choice. A Configuration Complete message
should appear on screen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
NDIS 2 Driver Installation on LAN Manager v2.2
==============================================
1. Type "Setup" in the LAN Manager directory(i.e. C:\LANMAN.DOS) and press
<Enter>. The Microsoft LAN Manager Setup screen should appear.
2. Choose "Network Drivers" from the "Configuration" field. Press <Enter>
to confirm your choice.
3. Choose <Add New Config> and press <Enter> to display a list of Network
Adapter Drivers.
4. Insert the Driver Diskette into drive A: or B: of your PC. Indicate the
drive location of the diskette.
5. Choose <Other Driver> and press <Enter>.
6. Select the appropriate Network Adapter Driver from the list.
For example, select "Accton EN5251 Based Fast Ethernet Adapter",
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the <Space bar> to highlight your
choice. If you have chosen the TCP/IP protocol, you will be prompted to
key in the IP address, the subnet mask, and the default gateway
(router). By default, the workstation number of the NetBios session is
set to 6.
Please consult Microsoft LAN Manager Installation Manual for more
details, or check the online help.
8. Select <OK> to confirm your choice. A Configuration Complete message
should appear onscreen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
If you are installing the LAN Manager for the first time, you will be
prompted to key in the default user name and domain of the workstation, as
well as to answer the questions concerning the Windows environment and
memory management. Just follow the instructions on the screen.
Sample Configuration Files
==========================
LAN Manager 2.0
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
DEVICE=C:\HIMEM.SYS
DEVICE=C:\DOS50\SETVER.EXE
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN5251\EN5251.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS
PROTOCOL.INI File
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[NETBEUI_XIF]
Drivername = netbeui$
BINDINGS = "EN5251_NIF"
[EN5251_NIF]
;----------------------------------------------------------------------
; Sample Protocol.ini file for EN5251 NDIS 2 driver
;----------------------------------------------------------------------
DriverName = EN5251$
; Slot = 1 ;; {1-4}
; MEDIA = AUTODETECT
;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
;----------------------------------------------------------------------
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS50;C:\NC;
APPEND=C:\PE2;C:\DOS50;
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
NET START WORKSTATION
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
LAN Manager 2.1 or LAN Manager 2.2
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
DEVICE=C:\HIMEM.SYS
REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS ;;delete
;;this
;;line
DEVICE=C:\DOS62\SETVER.EXE
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN5251\EN5251.DOS
PROTOCOL.INI File
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "EN5251_NIF"
LANABASE = 0
[EN5251_NIF]
;-------------------------------------------------------------------
; Sample Protocol.ini file for EN5251 NDIS 2 driver
;-------------------------------------------------------------------
DriverName = EN5251$
; Slot = 1 ;; {1-4}
; MEDIA = AUTODETECT
;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
;-------------------------------------------------------------------
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS62;C:\NC;
APPEND=C:\PE2;C:\DOS62;
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM=== LANMAN 2.1 ===
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM === LANMAN 2.1 ===
All trademarks or brand names mentioned are properties of their respective
companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.