;===============================================================================
; OEMSETUP FILE FOR PCI 10/100 Fast Ethernet Adapter =
; =
; =
; =
; Platform Type : x86 =
; =
; Usage: =
; =
; This file is the installation/configuration/deinstallation =
; procedure of the PCI 10/100 Fast Ethernet Driver for Windows NT(3.1, =
; 3.5, 3.51, 4.0) on x86 platform. =
; It can be called from Windows Setup directly, or via the =
; Windows NT Networks Control Program Applet (NCPA) from inside =
; the Windows Control Panel. =
; =
; History: =
; 28-MAY-1998 Junius Pre-Release =
; 08-JUN-2000 Axl Fix Bug for WinNT4.0 Server "Services for Macintosh"=
; =
;===============================================================================
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
PCI
[Options]
Centaur
FASTNIC
DEC140
DEC143
FastNIC9510
FastNIC9511
FastNIC9513
[ConnectionChoicesFASTNIC]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesCentaur]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesDEC140]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesDEC143]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesFastNIC9510]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesFastNIC9511]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[ConnectionChoicesFastNIC9513]
Connect_0 = "AutoSense", 5
Connect_1 = "10BaseT", 1
Connect_2 = "10BaseT Full_Duplex", 2
Connect_3 = "100BaseTx", 3
Connect_4 = "100BaseTx Full_Duplex", 4
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Fast Ethernet Controller Provider"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;Vendor1ID = 4887 ;; 0x1317 ( Vendor ID)
;Device1ID = 2433 ;; 0x0981 ( Device ID)
;Vendor2ID = 4113 ;; 0x1011 ( Vendor ID)
;Device2ID = 9 ;; 0x0009 ( Device ID)
;Vendor3ID = 4113 ;; 0x1011 ( Vendor ID)
;Device3ID = 25 ;; 0x0019 ( Device ID)
ProductSoftwareName = "FASTNIC_"
ProductSoftwareTitle = "PCI 10/100 Fast Ethernet Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\FASTNIC.SYS"
NetRuleSoftwareType = "FASTNICSys ndisDriver FASTNICDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """FASTNICSys"" yes no container"
NetRuleSoftwareClass = {"FASTNICDriver basic"}
NetRuleSoftwareSWBindable = {"FASTNICDriver FASTNICAdapter non exclusive 100"}
OptionHelpFile = "FASTNIC.hlp"
ProductHardwareName = "FASTNIC_"
ProductHardwareFASTNICTitle = "PCI 10/100 Fast Ethernet Adapter(AN981)"
NetRuleHardwareFASTNICType = "FASTNIC FASTNICAdapter"
NetRuleHardwareFASTNICClass = {"FASTNICAdapter basic"}
AdapterFASTNICType = 5 ;; PCI board
HelpFASTNICId = 10
FASTNICCFID = 159453975 ;; 0x09811317
ProductHardwareCentaurTitle = "PCI 10/100 Fast Ethernet Adapter(AN983)"
NetRuleHardwareCentaurType = "FASTNIC FASTNICAdapter"
NetRuleHardwareCentaurClass = {"FASTNICAdapter basic"}
AdapterCentaurType = 5 ;; PCI board
HelpCentaurId = 10
CentaurCFID = 159716119 ;; 0x09851317
ProductHardwareDEC140Title = "PCI 10/100 Fast Ethernet Adapter(DEC21140)"
NetRuleHardwareDEC140Type = "FASTNIC FASTNICAdapter"
NetRuleHardwareDEC140Class = {"FASTNICAdapter basic"}
AdapterDEC140Type = 5 ;; PCI board
HelpDEC140Id =10
DEC140CFID = 593937 ;; 0x00091011
ProductHardwareDEC143Title = "PCI 10/100 Fast Ethernet Adapter(DEC21143)"
NetRuleHardwareDEC143Type = "FASTNIC FASTNICAdapter"
NetRuleHardwareDEC143Class = {"FASTNICAdapter basic"}
AdapterDEC143Type = 5 ;; PCI board
HelpDEC143Id = 10
DEC143CFID = 1642513 ;; 0x00191011
ProductHardwareFastNIC9510Title = "PCI 10/100 Fast Ethernet Adapter(ADM9510)"
NetRuleHardwareFastNIC9510Type = "FASTNIC FASTNICAdapter"
NetRuleHardwareFastNIC9510Class = {"FASTNICAdapter basic"}
AdapterFastNIC9510Type = 5 ;; PCI board
HelpFastNIC9510Id = 10
FastNIC9510CFID = 159716119 ;; 0x09851317
ProductHardwareFastNIC9511Title = "PCI 10/100 Fast Ethernet Adapter(ADM9511)"
NetRuleHardwareFastNIC9511Type = "FASTNIC FASTNICAdapter"
NetRuleHardwareFastNIC9511Class = {"FASTNICAdapter basic"}
AdapterFastNIC9511Type = 5 ;; PCI board
HelpFastNIC9511Id = 10
FastNIC9511CFID = 2500924183 ;; 0x95111317
ProductHardwareFastNIC9513Title = "PCI 10/100 Fast Ethernet Adapter(ADM9513)"
NetRuleHardwareFastNIC9513Type = "FASTNIC FASTNICAdapter"
NetRuleHardwareFastNIC9513Class = {"FASTNICAdapter basic"}
AdapterFastNIC9513Type = 5 ;; PCI board
HelpFastNIC9513Id = 10
FastNIC9513CFID = 2501055255 ;; 0x095131317
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set SourceMedia = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(SourceMedia)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
;Get NT OS Version
OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
CloseRegKey $(KeyVersion)
Set NTVersion = *($(VersionStruct),4)
set Help_Directory = "WINNT"
Ifstr(i) $(NTVersion) == "3.10"
set Source_Directory = "WINNT\WNT31"
else-ifstr $(NTVersion) == "3.50"
set Source_Directory = "WINNT\WNT35"
else
set Source_Directory = "WINNT\WNT40"
endif
Ifstr(i) $(NTVersion) == "3.51"
set Source_Directory = "WINNT\WNT35"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
Endif
ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Hlp"
endif
Ifstr(i) $(NTVersion) == "3.10"
Goto adapteroptions
else-ifstr $(NTVersion) == "3.50"
Goto adapteroptions
else
Goto installproduct
endif
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "MediaType"
set ConnectionIndex = $(ValueData)
endif
EndForListDo
set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
ifstr(i) $(ConnectionValue) == ""
set ConnectionValue = *($(ConnectionList), 2)
endif
adapteroptions = +
set from = adapteroptions
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ConnectionIndex = $(Combo1Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
StartWait
Ifstr(i) $(NTVersion) == "3.10"
set AdapterList = $($R1)
else-ifstr $(NTVersion) == "3.50"
set AdapterList = $($R1)
else
ifint $($(Option)CFID) == $(FASTNICCFID)
set VendorID = 4887 ; 1317h
set DeviceID = 2433 ; 0981h
endif
ifint $($(Option)CFID) == $(CentaurCFID)
set VendorID = 4887 ; 1317h
set DeviceID = 2437 ; 0985h
endif
ifint $($(Option)CFID) == $(DEC140CFID)
set VendorID = 4113 ; 1011h
set DeviceID = 9 ; 0009h
endif
ifint $($(Option)CFID) == $(DEC143CFID)
set VendorID = 4113 ; 1011h
set DeviceID = 25 ; 0009h
endif
ifint $($(Option)CFID) == $(FastNIC9510CFID)
set VendorID = 4887 ; 1317h
set DeviceID = 2437 ; 0985h
endif
ifint $($(Option)CFID) == $(FastNIC9511CFID)
set VendorID = 4887 ; 1317h
set DeviceID = 38161 ; 9511h
endif
ifint $($(Option)CFID) == $(FastNIC9513CFID)
set VendorID = 4887 ; 1317h
set DeviceID = 38163 ; 9513h
endif
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
set AdapterList = $($R0)
endif
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
ForListDo $(AdapterList)
Ifstr(i) $(NTVersion) == "3.10"
Goto LagencyProcess
else-ifstr $(NTVersion) == "3.50"
Goto LagencyProcess
else
Goto PCIBusSupported
endif
LagencyProcess =+
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = 0 ;; temp until GetPCIinformation returns Function Number
ForListDo $($(Option)AdapterCount)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($(Option)CFID) == $(FASTNICCFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(CentaurCFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(DEC140CFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(DEC143CFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9510CFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9511CFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9513CFID)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}+
{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt , $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd , $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
EndForListDo
Goto TermProcess
PCIBusSupported =+
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ConnectionIndex = $(Combo1Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($(Option)CFID) == $(FASTNICCFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(CentaurCFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(DEC140CFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(DEC143CFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9510CFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9511CFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
ifint $($(Option)CFID) == $(FastNIC9513CFID)
set NewValueList = {{ TxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 160 }, +
{ RxPacketDesc, $(NoTitle), $(!REG_VT_DWORD), 120 }, +
{ TxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 320 }, +
{ RxDmaDesc, $(NoTitle), $(!REG_VT_DWORD), 40 }, +
{ PacketsPerTxInt, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ PacketsPerRxInd, $(NoTitle), $(!REG_VT_DWORD), 10 }, +
{ BurstLength, $(NoTitle), $(!REG_VT_DWORD), 0 }}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
endif
TermProcess =+
EndForListDo
EndWait
goto successful
updateparameters =+
;Get NT OS Version
OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
CloseRegKey $(KeyVersion)
Set NTVersion = *($(VersionStruct),4)
set Help_Directory = "WINNT"
Ifstr(i) $(NTVersion) == "3.10"
set Source_Directory = "WINNT\WNT31"
else-ifstr $(NTVersion) == "3.50"
set Source_Directory = "WINNT\WNT35"
else
set Source_Directory = "WINNT\WNT40"
endif
Ifstr(i) $(NTVersion) == "3.51"
set Source_Directory = "WINNT\WNT35"
endif
set HardParameterKey = $($R3)
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
Ifstr(i) $(NTVersion) == "3.10"
Goto U1label
else-ifstr $(NTVersion) == "3.50"
Goto U1label
else
Goto U2label
endif
U1label =+
ForListDo $($(Option)AdapterCount)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
EndForListDo
goto successful
U2label =+
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Hlp]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Hlp $(SrcDir)$(Help_Directory) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Hlp $(SrcDir)$(Help_Directory) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "PCI 10/100 Fast Ethernet Adapter Driver"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-FASTNIC]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-Centaur]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-DEC140]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-DEC143]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-FastNIC9510]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-FastNIC9511]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-FastNIC9513]
1,FASTNIC.SY_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.SYS
[Files-Hlp]
1,FASTNIC.HL_ , SIZE=999, DECOMPRESS, RENAME=FASTNIC.HLP
[LanguagesSupported]
ENG
[OptionsTextENG]
Centaur = "PCI 10/100 Fast Ethernet Adapter(AN983)"
FASTNIC = "PCI 10/100 Fast Ethernet Adapter(AN981)"
DEC140 = "PCI 10/100 Fast Ethernet Adapter(DEC21140)"
DEC143 = "PCI 10/100 Fast Ethernet Adapter(DEC21143)"
FastNIC9510 = "PCI 10/100 Fast Ethernet Adapter(ADM9510)"
FastNIC9511 = "PCI 10/100 Fast Ethernet Adapter(ADM9511)"
FastNIC9513 = "PCI 10/100 Fast Ethernet Adapter(ADM9513)"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareDescription = "PCI 10/100 Fast Ethernet Adapter Driver"
FunctionFASTNICTitle = "PCI 10/100 Fast Ethernet Adapter(AN981) Setup"
FunctionCentaurTitle = "PCI 10/100 Fast Ethernet Adapter(AN983) Setup"
FunctionDEC140Title = "PCI 10/100 Fast Ethernet Adapter(DEC21140) Setup"
FunctionDEC143Title = "PCI 10/100 Fast Ethernet Adapter(DEC21143) Setup"
FunctionFastNIC9510Title = "PCI 10/100 Fast Ethernet Adapter(ADM9510) Setup"
FunctionFastNIC9511Title = "PCI 10/100 Fast Ethernet Adapter(ADM9511) Setup"
FunctionFastNIC9513Title = "PCI 10/100 Fast Ethernet Adapter(ADM9513) Setup"
ProductHardwareFASTNICDescription = "PCI 10/100 Fast Ethernet Adapter(AN981)"
ProductHardwareCentaurDescription = "PCI 10/100 Fast Ethernet Adapter(AN983)"
ProductHardwareDEC140Description = "PCI 10/100 Fast Ethernet Adapter(DEC21140)"
ProductHardwareDEC143Description = "PCI 10/100 Fast Ethernet Adapter(DEC21143)"
ProductHardwareFastNIC9510Description = "PCI 10/100 Fast Ethernet Adapter(ADM9510)"
ProductHardwareFastNIC9511Description = "PCI 10/100 Fast Ethernet Adapter(ADM9511)"
ProductHardwareFastNIC9513Description = "PCI 10/100 Fast Ethernet Adapter(ADM9513)"
ConnectionList = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
"network adapter. Select [Help] for a detailled "+
"description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Media Type:"
Combo1List = $(ConnectionList)
Combo1Out = $(ConnectionValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1080
HelpContext = $(Help$(Option)Id)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.