****************************************************************************
* *
* Turbo PCI Ethernet Card *
* *
* Packet Driver *
* *
* Ver. 1.00 *
* *
* README file *
* *
****************************************************************************
1. Introduction
This Ethernet Packet driver conforms to FTP Software Public Domain Packet
Driver Specification Revision 1.09 (Sep. 15, 1989). It supports many
network applications, such as FTP Software PC/TCP, NCSA TCP/IP, Wollongong
Pathway Access and NetWare for DOS workstations.
2. Contents of the Subdirectory
RPCIPK.COM The Packet driver for the Turbo PCI Ethernet Card.
3. Installation
1) Install the Turbo PCI Ethernet Adapter on your PC system, following
the procedure in your PCI Ethernet adapter installation manual.
2) Install the network operating system you are going to use.
3) Copy RPCIPK.COM to the directory that is created while you are
installing your network system.
4) Follow the instructions given in your network application menu to
alter your system configuration file, then reboot the PC.
5) At the DOS prompt, type as follows to load RPCIPK:
RPCIPK <Packet_Int>
where:
Packet_Int The software interrupt number. The range is from
0X60 to 0X80 (Hex). This is a compulsory parameter.
4. Unload
To remove the packet driver from the main memory, run RPCIPK with '-u' at
the DOS prompt, as shown below:
RPCIPK -u <Packet_Int>
where:
Packet_Int The software interrupt number specified during
installation. This is a compulsory parameter.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.