---------------------------------
Toshiba RESUME Device Driver for
QEMM-386 and 386MAX
---------------------------------
GENERAL DESCRIPTION:
To use RESUME when using a 386 memory manager, please read and follow
these instructions.
VRESUME supports these 80386 memory managers:
- QEMM386.SYS (v5.11 or higher)
- 386MAX.SYS (v4.07 or higher)
You do not need VRESUME if you are using Toshiba's EMM386.EXE or
another 386/486-based Memory Manager which already supports the Resume
feature on Toshiba computers (such as Quarterdeck Expanded Memory Manager-386,
v6.0).
VRESUME and WRESUME.386 are not mutually exclusive. VRESUME is
intended for execution outside of Windows 3.x, and WRESUME.386 is intended
for execution under Windows 3.x in 386-enhanced mode (reference WRESUME.TXT).
You may load both drivers if you desire.
VRESUME.SYS INSTALLATION:
1. Place the Companion Diskette in floppy drive A: and copy
the VRESUME file to your DOS directory on the hard disk with the
following command.
COPY A:\VRESUME.SYS C:\DOS
If you desire, you may copy the VRESUME file to a different drive
or directory.
2. Edit the standard CONFIG.SYS file (found in the root directory)
by adding the line shown below:
DEVICE=C:\DOS\VRESUME.SYS
(If you typed another path in step 1 above, use that path here also.)
3. Save the modified CONFIG.SYS file, exit the editor, and reboot your
computer from the hard disk.
The installation is now complete. Restarting your computer will
automatically cause the VRESUME driver to be loaded and initialized.
WARNINGS AND CAUTIONS:
If you are using your memory manager only for the purpose of running
device drivers and other memory-resident programs in the upper memory area
instead of conventional memory, please be aware of the following:
CAUTION !!
VRESUME depends on certain EMS support functions being
available in order to work properly. Configuring your
memory manager to partially or completely disable expanded
memory (EMS) support may cause VRESUME to fail.
If you find that VRESUME fails in this situation, you should change the
setup for your memory manager to specify at least some amount of expanded
memory to be provided--even if your programs do not require expanded memory.
This should allow VRESUME to operate properly.
The following examples show some parameters to avoid when configuring two
specific memory managers: On 386MAX, specifying EMS=0 is known to cause
VRESUME to fail. On QEMM-386, specifying NOEMS is known to cause VRESUME to
fail.
NOTE
The PopUp Window will not be available when VRESUME is loaded.
*Trademarks
Quarterdeck Expanded Memory Manager-386, QEMM-386 are registered trademarks
of Quarterdeck Office Systems.
386MAX is a registered trademark of Qualitas, Inc.
Microsoft Windows, MS-DOS, are registered trademarks of the Microsoft
Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.