OEMSETUP.INF Driver File Contents (100v34.zip)

; 
;  Purpose: Netcard setup information file for Windows NT 3.1
;
;  Author:  Charles Yu
; 
;  Date:    Nov 10, 1998
; 
;
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
;    EISA
;    "Jazz-Internal Bus"
    PCI
[Options]
    ;VT3043
    VT3043
[ConnectionChoicesVT3043]
    Connect_0 = "Auto-Negotiation", 0
    Connect_1 = "100BaseTx Half_Duplex", 1
    Connect_2 = "100BaseTx Full_Duplex", 2
    Connect_3 = "10BaseT   Half_Duplex", 3
    Connect_4 = "10BaseT   Full_Duplex", 4
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "PCI Fast Ethernet Adapter Manufacturer"
; Driver Version info
; VERSION.... 2.29
ProductMajorVersion     = "2"
ProductMinorVersion     = "29"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358

ProductSoftwareName     = "FETNDIS"
ProductSoftwareTitle    = "PCI Fast Ethernet Adapter [NDIS3] Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\fetnd3f.sys"
NetRuleSoftwareType     = "FETSys ndisDriver FETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """FETSys"" yes no container"
NetRuleSoftwareClass    = {"FETDriver basic"}
NetRuleSoftwareSWBindable = {"FETDriver VT3043Adapter non exclusive 100"}

OptionHelpFile = "fetndis.hlp"
ProductHardwareName = "FETNDIS"

; OEM....
ProductHardwareVT3043Title = "PCI Fast Ethernet Adapter"
NetRuleHardwareVT3043Type  = "VT3043 VT3043Adapter"
NetRuleHardwareVT3043Class = {"VT3043Adapter basic"}
AdapterVT3043Type = 5   ;; PCI board
HelpVT3043Id = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638


NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	  Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	       Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		     goto ShellCodeError
	       endif
	       set Error = $($R0)
	       set from = end
	       set to = end
	       goto nonfatalinfo
	  else
	       set StartLabel = configureadapter
	  endif
   else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	      goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	    endif
	    set Error = $($R0)
	       Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	Endif
	Set SrcDir = $($R1)
	install "Install-Hlp"
    endif
    Goto adapteroptions
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	   Goto fatalregistry
	Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "ConnectionType"
	    set ConnectionIndex = $(ValueData)
	endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
	set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
	set from = adapteroptions
	read-syms FileDependentDlg$(!STF_LANGUAGE)
	SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
	ui start "InputDlg"
	ifstr(i) $(DLGEVENT) == "CONTINUE"
	   set ConnectionIndex = $(Combo1Out)
	   ui pop 1
	else-ifstr(i) $(DLGEVENT) == "BACK"
	   set CommonStatus = STATUS_USERCANCEL
	   ui pop 1
	   goto end
	else
	   ui pop 1
	   goto end
	endif
	set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
	ifstr(i) $(!NTN_InstallMode) == configure
	   goto updateparameters
	endif
installproduct =+
    StartWait
    set AdapterList = $($R1)
    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Goto ShellCodeError
	   Else-Ifstr(i) $($R0) == STATUS_FAILED
	       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	       endif
	       set Error = $($R0)
	       Goto fatal
	   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	   Endif
	   Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   set Error = $($R0)
	   goto fatal
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey      = $($R1)
	Set SoftNetRuleKey      = $($R2)
	Set SoftServiceKey      = $($R3)
	Set SoftParameterKey    = $($R4)
	Set SoftLinkageKey      = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
	set BusNum = *($($),1)
	set DeviceNum = *($($),2)
	set FunctionNum = 0       ;; temp until GetPCIinformation returns Function Number
		ForListDo $($(Option)AdapterCount)

		   Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
		   ifint $($R4) != -1
			Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
		   endif
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		   endif
		   set RegistryErrorIndex = $($R0)
		   Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $($R1)
			CloseRegKey $($R2)
			CloseRegKey $($R3)
			goto fatalregistry
		   endif
		   Set HardNetCardKey      = $($R1)
		   Set HardNetRuleKey      = $($R2)
		   Set HardParameterKey    = $($R3)
		   set AdapterNumber = $($R4)
		   set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
				       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
				       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
				       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
				       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
		   Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		   endif
		   set BusTypeNum = 5
		   set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
				       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
				       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
				       {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}

		   Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		   endif
                   ifint $($(Option)CFID) == $(VT3043CFID)
			set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+
                            {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+
                            {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
			    {OsId,$(NoTitle),$(!REG_VT_DWORD),65536}}
; NT_35 = 0x00020000 = 131072(10)
;                        set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),0},+
;                                             {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),512}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            goto ShellCodeError
                        endif
                    endif
		   set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
		   Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
		      goto ShellCodeError
		   endif
	
		   set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
		   set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
		   set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
				       {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
				       {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
				       {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		   Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		   endif
		   CloseRegKey $(HardNetCardKey)
		   CloseRegKey $(HardNetRuleKey)
                   CloseRegKey $(HardParameterKey)
	       EndForListDo
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    ForListDo $($(Option)AdapterCount)
       Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	   goto ShellCodeError
       endif
       CloseRegKey $(KeyParameters)
    EndForListDo
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
	   Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error"
	       goto ShellCodeError
	   endif
	   set !UG_Filename = $($R0)
	   install "Install-Update"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	       goto fatal
	   endif
	   SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	   SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	   CloseRegKey $(KeyProduct)
     else
	   goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "PCI Fast Ethernet Adapter [NDIS3] Driver"  , TAGFILE = fetnd3f.sys
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-VT3043]
1,fetnd3f.SYS , SIZE=999
[Files-Hlp]
1,fetndis.HLP , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    VT3043  = "PCI Fast Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "PCI Fast Ethernet Adapter [NDIS3] Driver"

FunctionVT3043Title = "PCI Fast Ethernet Adapter Setup"
ProductHardwareVT3043Description = "PCI Fast Ethernet Adapter"

ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
	  "network adapter. Select [Help] for a detailled "+
	  "description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 3.10