INSTALL.TXT Driver File Contents (ET32P-14.EXE)

         NDIS3 Driver Installation for Windows 95 / Windows 98
         =====================================================

   In this driver release, the NDIS3 driver is provided for the Windows 95 / Windows 98 installation. The path and file name of the NDIS3 driver in the driver disk are:

         \WIN9598\ET32NT.SYS

   Introduction
   -------------

   The following instruction shows how to install the adapter's
   NDIS driver for Microsoft's (R) Windows 95 / Windows 98.

   Installation procedure
   ----------------------

   The following installation procedure is assumed that Windows 95 / Windows 98 has been installed in your computer without any network drivers installed.


   1. Turn your computer off.

   2. Install the Adapter into your computer.

   3. Turn your computer on.

   4. A "New Hardware Found" dialog appears and prompts you for the
      selection of PCI Ethernet Controller. You can select the "Driver
      from disk provided by hardware manufacturer" and press the OK button.

   5. Enter "A:\WIN9598" when prompts for the WIN95/WIN98 drivers and inserts the
      adapter's driver diskette in drive A.

   6. Enter your Workstation and Workgroup names accordingly when prompts
      to next. You'll have to have your WIN95/WIN98 CD-ROM ready in this section
      for any necessary networking files.

   7. When it finishes copying, your Windows 95 / Windows 98 system is ready to run
      with your adapter.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.27